| CCKW | |
| Origin: | United States |
| Type: | -ton 6×6 Cargo truck |
| Is Vehicle: | yes |
| Designer: | Yellow Truck and Coach Co. |
| Design Date: | 1941 |
| Manufacturer: | Yellow/GMC Truck and Coach Chevrolet |
| Production Date: | 1941–1945 |
| Number: | Grand Total: ~572,500 including all variants; CCKW specific: ~518,000 — LWB CCKW-353: ~464,000 and — SWB CCKW-352: ~54,000 units plus ~54,500 non CCKW variants |
| Variants: | 1939 ACKWX – 2,466 units C.O.E. AFKWX – 7,235 units 6×4 CCW-353 – 23,649 units DUKW amphibs – 21,147 units |
| Spec Label: | 353 Cargo w/winch |
| Weight: | empty loaded |
| Height: | to cab overall |
| Engine: | GMC 270 straight-6 |
| Engine Power: | at 2,750 rpm or at 2,750 rpm |
| Transmission: | 5-speed manual × 2 range transfer case |
| Suspension: | Beam axles on leaf springs |
The GMC CCKW, also known as "Jimmy", or the by its Ordnance Supply Catalog number, was a highly successful series of off-road capable, 2-ton, 6×6 trucks, built in large numbers to a standardized design (from 1941 to 1945) for the U.S. Army, that saw heavy service, predominantly as cargo trucks, in both World War II and the Korean War. The original "Deuce and a Half", it formed the backbone of the famed Red Ball Express that kept Allied armies supplied as they pushed eastward after the Normandy invasion.
The CCKW came in many variants, including open or closed cab, long wheelbase (LWB) CCKW-353 and short (SWB) CCKW-352, and over a score of specialized models, but the bulk were standard, general purpose, cargo models. A large minority were built with a front mounted winch, and one in four of the cabs had a machine-gun mounting ring above the co-driver's position.
Of the almost 2.4 million trucks that the U.S. Army bought between 1939 and December 1945, across all payload weight classes, some 812,000, or just over one third, were -ton trucks.[1] GMC's total production of the CCKW and its variants, including the 2-ton, 6x6, amphibian DUKW, and the 6×4, 5-ton (on-road) CCW-353, amounted to some 572,500 units – almost a quarter of the total WW II U.S. truck production, and 70 percent of the total -ton trucks. GMC's total of ~550,000 purely 6×6 models, including the DUKW, formed the overwhelming majority of the ~675,000 six by six -ton trucks, and came in less than 100,000 shy of the almost 650,000 World War II jeeps.[1] Additionally, GM built over 150,000 units of the CCKW's smaller brother, the -ton, 4×4 Chevrolet G506, at the same factory.
The GMC CCKW began to be phased out, once the M35 series trucks were first deployed in the 1950s, but remained in active U.S. service until the mid-1960s. Eventually, the M35 series, originally developed by REO Motors, succeeded the CCKW as the U.S. Army's standard -ton, 6×6 cargo truck.
The name CCKW comes from GMC model nomenclature:
In 1939-1940, the US Army Ordnance Corps was developing load-rated (off-road rating) 6×6 tactical trucks that could operate off-road in all weather. General Motors, already supplying modified commercial trucks to the Army, modified the 1939 ACKWXbuilt for the French Armyinto the CCKW. The General Motors design was chosen by the Army and went into production at GM's Yellow Truck and Coach division's Pontiac, Michigan plant alongside 6×4 CCWs. Later, they were also manufactured at GM's St. Louis, Missouri Chevrolet plant.
Sources do not precisely agree on the total numbers of CCKWs built by the end of production in 1945. Ware (2010) lists one single number of 562,750 of CCKW trucks, built across all variants—presumably including the amphibian DUKW. More clearly specified numbers are provided by Sunderlin in Army Motors magazine, and by Jackson, using the numbers found in the 1946 revision of the U.S. military's Summary Report of Acceptances, Tank-Automotive Materiel. Sunderlin reports a total of 528,829 of -ton 6×6 units (excluding the DUKW) produced by GMC—versus a total of 527,168 accepted by the U.S. Army.[2] Jackson's tabulation of the 1946 U.S. acceptance numbers adds up to 524,873 units, excluding the DUKWs and the ACKWX predecessor models.[3] Both of these numbers still include the cab-over engine AFKWX-353 models—leaving a total of some 518,000–519,000 actual CCKW-352 and CCKW-353 units. In addition, GMC serial numbers indicate a production of 23,500 of the same bodied 6x4 CCW models, versus 23,649 units accepted by U.S. ordnance.
In any case, GM / GMC built a total of -ton, 6-wheeled trucks that was second only to the WWII "Jeep" —and neither Ford nor Willys individually built as many jeeps during the war.
The CCKW was equipped with the GMC 270 engine, an overhead valve inline-6 with or at 2,750 rpm, and at 1,400 rpm. A bore by stroke gave a displacement. This gasoline engine was designed for commercial trucks, and was reliable in service.
The transmission was a Warner T93 5-speed with a direct 4th gear and overdrive 5th gear. The transfer case had high and low gears, and engaged the front axle. Originally all axles were a Timken split type, later trucks also used GM "banjo" types.
The CCKW had a ladder frame chassis with three driven beam axles, the front on leaf springs, the rear tandem on leaf springs with locating arms. There were two wheelbases, the short Model 352 and the long Model 353. The short, was used with a short cargo bed as an artillery prime mover for and howitzers. All other models used the long wheelbase. Tires were 7.50-20, brakes were hydraulic with vacuum assist.
Some were fitted with front-mounted winches. A winch added and 14inches.
Some open cab chassis were cut in half behind the cab for air transport. Each half was a load, at the vehicle's destination, the halves were bolted back together.
Initially, all versions used a modified commercial closed cab design having a metal roof and doors. By 1944, an open cab version, with a canvas roof and doors, was used. This was easier to build, and the roof could be removed to lower the shipping height. 1 in 4 of cabs had a machine gun mounting ring above the co-driver's position.
The CCKW provided a platform for the widest range of bodies on any U.S. military vehicle, with the cargo version being the most common. As steel was more heavily rationed during the course of the war, the steel cargo bed was replaced by a wooden one. Wooden beds proved unsatisfactory and a 'composite' bed with steel sides, framing, and wooden bottom slats was developed. However, the composite bed was still unsatisfactory and the bed design returned to all steel. Standard cargo models had beds with fixed sides and a drop tailgate, as well as folding troop seats.
A standard rectangular van configuration was used in communications, medical, workshop, and many other specialty roles. Special built vans were also used.
Many specialized variants of the basic 6×6 CCKW were made, some in small numbers, including some converted in the field. These include:
The ACK-353 (A for 1939 design, C for conventional cab, and K for all wheel drive) -ton 4×4 truck was the smaller brother of the ACKWX, and a predecessor to the Chevrolet G506, competing with the Dodge / Fargo T-203 / VF-400 series, as GM was at that time also trying to clinch the lucrative contract for the standard World War II cargo trucks in the -ton 4×4 category.[5]
The ACK-353 was equipped with the new for 1939 GMC 248 engine, an overhead valve, low-deck inline-six with a bore and stroke, resulting in a displacement, producing 77bhp (net).[6] [7] The transmission was a four-speed manual, combined with a two-speed transfer-case engaging the front axle for all-wheel drive operation.
The truck rode on a wheelbase, measuring long, wide, and tall – or with the rear top bows taken down. Tires were 7.50-20, and weight came in at . A special feature were the front hubs, designed to take dual wheels in especially challenging terrain.
Fitted with steel GS bodies with fixed sides and troop seats, the trucks were originally ordered under French contract, but ended up in use by the British Army,[7] although some 2,000 units delivered to the French in early 1940 were used from June 1940 to reequip the infantry of the light mechanized divisions whose equipment had been lost at Dunkirk.[8] Some were kept in service by the Armistice Army[8] and others likely fell into the hands of the Nazi Germany Wehrmacht.[9]
The ACKWX-353 (A for 1939 design, C for conventional cab, K for all wheel drive, W for tandem rear axles, and X for non-standard chassis) three-ton 6x6 truck was the direct predecessor from which the CCKW was developed. Fitted with the same drivetrain as the ACK, the trucks weighed, and measured long, wide, and tall / or to cab.[10]
Some 1,000 of the 3-ton 6x6 trucks were originally contracted by France, butjust like the 4×4 ACK trucksafter the defeat of the French, diverted to Britain in 1940. The British however, deemed the trucks unfavorable for use in the war, due to their long wheelbase and lacking power, and diverted them to the USSR in turn, in 1941.[11] A total of 2,466 ACKWX trucks were built — both according to GMC's serial numbers, as well as the U.S. Army's acceptance figures.[2]
The AFKWX (A for 1939 design, F for forward cab, K for all wheel drive, W for tandem rear axles, and X for non-standard chassis) 353, a cab over engine, long cargo bed version of the CCKW, went into production alongside it in 1942 at Yellow's Pontiac plant and Chevrolet's in St. Louis. Otherwise mechanically identical, its compact cabin design allowed a, and later cargo bed to be fitted. Only the first 50 units produced had closed cabs, all others were open. None had a front-mounted winch. The cab over design made engine maintenance difficult. As a result, only 7,235 were built, – 2,232 units with the body, and 5,000 of the version.[3]
The CCW-353 (C for 1941 design, C for conventional cab, and W for tandem rear axles) was a near identical version of the CCKW-353, that lacked its front-wheel drive, resulting in an officially purely on-road, and therefore 5-ton rated, 6×4 version of the same truck. A beam front axle was used, with the transfer case locked in high range. Of the ~118,000 -ton, 6x4 trucks the U.S. built in WW II, GMC contributed 23,649 units of the CCW-353 as standard cargo trucks without winch – almost all of them built in 1942.[12]
See main article: DUKW. The DUKW (D for 1942 design, U for utility, K for all wheel drive, and W for tandem rear axles) — popularly the "Duck" – was an amphibious truck that shared the CCKW's driveline, but had a totally different body and structure than all the other trucks. First produced at Yellow's Pontiac plant, as demand increased production was added to Chevrolet's St. Louis plant. The hull, designed by an America's Cup winner, gave the truck respectable sea-keeping capability. A very successful design, 21,147 were built.
