The G.A.C. 102 Aristocrat or General 102 Aristocrat is a single-engined cabin monoplane built in the US just before the Great Depression. It proved popular, with over forty built; an early example was taken on an aerial survey of Antarctica. One survives.
The Aristocrat is a high, braced wing monoplane with a two-part wing of rectangular plan apart from clipped tips, mounted to the fuselage without dihedral. The wing structure is entirely wooden and built around spruce box-spars and girder ribs. Apart from the leading edge, which is reinforced with aluminium sheet, the surfaces are fabric covered. Parallel pairs of steel bracing struts run between the lower fuselage and the spars at about mid-span.
The majority of Aristocrats were powered by 110hp Warner Scarab seven-cylinder radial engines, though later variants had more powerful radials. Photographs show them uncowled.
Behind the engine, the lower fuselage of the Aristocrat is flat-sided and built from welded chrome-molybdenum steel tubes. Its enclosed cabin is largely under the wing though the pilot's windshield is ahead of the leading edge and close to the engine; behind the pilot, there are seats for two passengers, who enter by two large doors, and rear baggage space. Behind the wing leading edge, the upper fuselage surface is raised with a fairing.
The Aristocrat's empennage is steel framed and fabric covered. Its tailplane is mounted at the top of the fuselage and the horizontal tail is straight-tapered in plan out to rounded tips. The tailplane is in-flight adjustable and braced from below with a single strut on each side, carrying balanced elevators with a cut-out for rudder movement. The fin is small and almost triangular but the rudder, also balanced, is tall and blunt-topped.
The undercarriage is of the fixed, cantilever, tailwheel type and has a track of 2.1m (06.9feet). Each faired undercarriage leg is a strongbox, formed from aluminium sheet and hinged on the lower fuselage longeron. Their tops are joined to a rubber spring shock absorber mounted centrally on the cabin frame below the pilot's seat. The wheels have brakes. The tailwheel's castoring is also restrained by rubber springs.
The first flight of Aristocrat was at the end of July 1928. Two more prototypes were built and the second prototype accompanied Richard E. Byrd's aerial survey expedition to the Antarctic in late 1928-early 1929. These were followed by thirty-one examples of the production type 102-A, all with the same 110hp Scarab engine as on the prototypes.
Models 102-B to 102-D, with different engines were proposed but not built. Six examples of the 102-E, powered by a 175hp Wright J-6-5 five-cylinder radial engine were completed in 1931-2. The large increase of power raised the Aristocrat's cruise speed up to 110mph.
One 102-E was fitted experimentally with full-span Zap flaps and retractable Zap ailerons (spoilerons) by NACA in 1932-3. A photograph shows that this 102-E, at least, had a much-modified undercarriage with the wheels on simple V-struts and with vertical shock absorber legs to the forward wing spars.
The final Aristocrat variant was the 102-F, fitted with a 165hp Continental A-70. There were six of these, one converted from a 102-E.
General Airplanes was liquidated in 1931.
Aristocrat N(C)278H, built in the 102-A batch, was restored in 1986 and given a 220hp Continental radial. It remained airworthy until at least 2010.
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "G.A.C. 102 Aristocrat".
Except where otherwise indicated, Everything.Explained.Today is © Copyright 2009-2024, A B Cryer, All Rights Reserved. Cookie policy.