| Fremont Bridge | |
| Image Upright: | 1.2 |
| Official Name: | Fremont Bridge |
| Carries: | Four lanes, two decks |
| Crosses: | Willamette River and surface streets |
| Locale: | Portland, Oregon |
| Maint: | Oregon Department of Transportation |
| Id: | 02529 |
| Design: | Tied-arch bridge |
| Mainspan: | longest in Oregon |
| Open: | November 15, 1973 |
| Coordinates: | 45.5377°N -122.6825°W |
The Fremont Bridge is a steel tied-arch bridge over the Willamette River located in Portland, Oregon, United States. It carries Interstate 405 and US 30 traffic between downtown and North Portland where it intersects with Interstate 5. It has the longest main span of any bridge in Oregon and is the second longest tied-arch bridge in the world (after Caiyuanba Bridge across the Yangtze River, China).[1] The bridge was designed by Parsons, Brinckerhoff, Quade and Douglas, and built by Murphy Pacific Corporation.[2]
The bridge has two decks carrying vehicular traffic, each with four lanes. The upper deck is signed westbound on US 30 and southbound on I-405. The lower deck is signed eastbound on US 30 and northbound on I-405.
Due to the public's dissatisfaction with the appearance of the Marquam Bridge, the Portland Art Commission was invited to participate in the design process of the Fremont. The improvement in visual quality resulted in a bridge that was nearly six times as expensive as the purposely economical Marquam Bridge. Designers modeled the bridge after the original 1964 Port Mann Bridge in Vancouver, British Columbia.
The steel tie-girder (I-beam) is tall and 50inches wide. On October 28, 1971, while still under construction, a 6feet crack was found on the west span of this girder that required a $5.5 million redesign and repair. The ramps and approaches are steel box girders. If the lanes of the bridge were placed end-to-end, there are 3.27disp=preunitNaNdisp=preunit on the arch bridge and 14.12disp=preunitNaNdisp=preunit on the ramps and approaches.
The center span of the bridge, where the rib of the arch is above the deck, is long. It was fabricated in California then assembled at Swan Island Industrial Park, 1.7miles downstream. After assembly it was floated on a barge the 1.7miles trip to the construction site. On March 16, 1973, the steel arch span was lifted 170feet using 32 hydraulic jacks. At the time, it was listed in the Guinness Book of World Records as the heaviest lift ever completed.[3]
The bridge was opened on November 15, 1973,[4] [1] at a final cost of $82 million (equivalent to $ million in), most of which was financed by the Federal Highway Administration. In 1976, an American flag and an Oregon flag were added atop the structure as part of the bicentennial celebration for the United States.[5] The flags were installed with the use of a helicopter. The 15x flags are attached to 50feet tall flagpoles at the crest of the arches.[5]
The Fremont Bridge was also the 26th Peregrine falcon nest site designated in Oregon in 1995 after the raptor was placed on the U.S. Threatened and Endangered Species list in 1970.[6]
The raptor has since been removed from the list and is now listed as least concern.[7]
The bridge as well as Portland's associated Fremont Street were named for John C. Fremont (1813–1890). Fremont was an early explorer of the Oregon Country. He served in the United States Army at the time as a Captain and was later promoted to General. In 1856, he ran for president, but was defeated by James Buchanan.[8]