Free-space path loss explained

In telecommunication, the free-space path loss (FSPL) (also known as free-space loss, FSL) is the attenuation of radio energy between the feedpoints of two antennas that results from the combination of the receiving antenna's capture area plus the obstacle-free, line-of-sight (LoS) path through free space (usually air).[1] The "Standard Definitions of Terms for Antennas", IEEE Std 145-1993, defines free-space loss as "The loss between two isotropic radiators in free space, expressed as a power ratio."[2] It does not include any power loss in the antennas themselves due to imperfections such as resistance. Free-space loss increases with the square of distance between the antennas because the radio waves spread out by the inverse square law and decreases with the square of the wavelength of the radio waves. The FSPL is rarely used standalone, but rather as a part of the Friis transmission formula, which includes the gain of antennas.[3] It is a factor that must be included in the power link budget of a radio communication system, to ensure that sufficient radio power reaches the receiver such that the transmitted signal is received intelligibly.

Free-space path loss formula

The free-space path loss (FSPL) formula derives from the Friis transmission formula. This states that in a radio system consisting of a transmitting antenna transmitting radio waves to a receiving antenna, the ratio of radio wave power received

Pr

to the power transmitted

Pt

is:
Pr
Pt

=DtDr\left(

λ
4\pid

\right)2

where

Dt

is the directivity of the transmitting antenna

Dr

is the directivity of the receiving antenna

 λ

is the signal wavelength

d

is the distance between the antennasThe distance between the antennas

d

must be large enough that the antennas are in the far field of each other

d\ggλ

.[4] The free-space path loss is the loss factor in this equation that is due to distance and wavelength, or in other words, the ratio of power transmitted to power received assuming the antennas are isotropic and have no directivity (

Dt=Dr=1

):[5] \begin\mbox = \left (\frac \lambda \right)^2\end

Since the frequency of a radio wave

f

is equal to the speed of light

c

divided by the wavelength, the path loss can also be written in terms of frequency: \begin\mbox = \left(\right)^2\end

Beside the assumption that the antennas are lossless, this formula assumes that the polarization of the antennas is the same, that there are no multipath effects, and that the radio wave path is sufficiently far away from obstructions that it acts as if it is in free space. This last restriction requires an ellipsoidal area around the line of sight out to 0.6 of the Fresnel zone be clear of obstructions. The Fresnel zone increases in diameter with the wavelength of the radio waves. Often the concept of free space path loss is applied to radio systems that don't completely meet these requirements, but these imperfections can be accounted for by small constant power loss factors that can be included in the link budget.

Influence of distance and frequency

The free-space loss increases with the distance between the antennas and decreases with the wavelength of the radio waves due to these factors:[6]

I

) – the power density of the radio waves decreases with the square of distance from the transmitting antenna due to spreading of the electromagnetic energy in space according to the inverse square law[1]

Aeff

) – the amount of power the receiving antenna captures from the radiation field is proportional to a factor called the antenna aperture or antenna capture area, which increases with the square of wavelength.[1] Since this factor is not related to the radio wave path but comes from the receiving antenna, the term "free-space path loss" is a little misleading.

Derivation

The radio waves from the transmitting antenna spread out in a spherical wavefront. The amount of power passing through any sphere centered on the transmitting antenna is equal. The surface area of a sphere of radius

d

is

4\pid2

. Thus the intensity or power density of the radiation in any particular direction from the antenna is inversely proportional to the square of distance

I\propto{Pt\over4\pid2}

(The term

4\pid2

means the surface of a sphere, which has a radius

d

. Please remember, that

d

here has a meaning of 'distance' between the two antennas, and does not mean the diameter of the sphere (as notation usually used in mathematics).) For an isotropic antenna which radiates equal power in all directions, the power density is evenly distributed over the surface of a sphere centered on the antenna

I={Pt\over4\pid2}          (1)

The amount of power the receiving antenna receives from this radiation field is

Pr=AeffI          (2)

The factor

Aeff

, called the effective area or aperture of the receiving antenna, which has the units of area, can be thought of as the amount of area perpendicular to the direction of the radio waves from which the receiving antenna captures energy. Since the linear dimensions of an antenna scale with the wavelength

λ

, the cross sectional area of an antenna and thus the aperture scales with the square of wavelength

λ2

. The effective area of an isotropic antenna (for a derivation of this see antenna aperture article) is

Aeff={λ2\over4\pi}

Combining the above (1) and (2), for isotropic antennas

Pr=({Pt\over4\pid2})({λ2\over4\pi})

FSPL={Pt\overPr}=({4\pid\overλ})2

Free-space path loss in decibels

A convenient way to express FSPL is in terms of decibels (dB):[8]

\begin{align} \operatorname{FSPL}(dB) &=10log10\left(\left(

4\pidf
c

\right)2\right)\\ &=20log10\left(

4\pidf
c

\right)\\ &=20log10(d)+20log10(f)+20log10\left(

4\pi
c

\right)\\ &=20log10(d)+20log10(f)-147.55, \end{align}

using SI units of meters for

d

, hertz (s−1) for

f

, and meters per second (m⋅s−1) for

c

, (where c=299 792 458 m/s in vacuum, ≈ 300 000 km/s)

For typical radio applications, it is common to find

d

measured in kilometers and

f

in gigahertz, in which case the FSPL equation becomes

\operatorname{FSPL}(dB)=20log10(dkm)+20log10(fGHz)+92.45,

an increase of 240 dB, because the units increase by factors of and respectively, so:

20log10(103)+20log10(109)=240.

(The constants differ in the second decimal digit when the speed of light is approximated by 300 000 km/s. Whether one uses 92.4, 92.44 or 92.45 dB, the result will be OK as the average measurement instruments cannot provide more accurate results anyway. A logarithmic scale is introduced to see the important differences (i.e. order of magnitudes), so in engineering practice dB results are rounded)

See also

Further reading

Notes and References

  1. Book: Islam. Syad Kamrul. Haider. Mohammad Rafiqul. Sensors and Low Power Signal Processing. 10 December 2009 . 978-0387793917. 49. Springer . 2010.
  2. Book: IEEE Std 145-1993(R2004), IEEE Standard Definitions of Terms for Antennas. 1993. The Institute of Electrical and Electronics Engineers, Inc.. New York, NY. 1-55937-317-2. 14.
  3. Friis. H.T.. A Note on a Simple Transmission Formula. IRE Proc.. May 1946. 34 . 5 . 254–256. 10.1109/JRPROC.1946.234568 . 51630329 .
  4. Book: Johnson. Richard. Antenna Engineering Handbook. 1984. McGraw-Hill, Inc.. New York, NY. 0-07-032291-0. 1–12. 2nd.
  5. Book: Whitaker . Jerry C. . The Electronics Handbook . CRC Press . 1996 . 1321 . 9780849383458 .
  6. Book: Cerwin . Steve . Radio Propagation and Antennas: A Non-Mathematical Treatment of Radio and Antennas . Author House . 2019 . 31–35 . 9781728320328 ., Section 1.8
  7. Book: Rappaport, Theodore S. . Wireless communications: principles and practice . 2010 . Pearson India Education Services . 978-81-317-3186-4 . Second edition, twentieth impression 2019, Indian subcontinent adaption . Noida . 107.
  8. Web site: Free Space Path Loss Calculator . Pasternack . October 16, 2021.