Franchi LF-57 explained

LF57
Origin:Italy
Type:Submachine gun
Is Ranged:yes
Service:1962–present
Used By:See Users
Designer:Luigi Franchi
Manufacturer:Franchi
Production Date:1956[1] or 1957-c.1980
Variants:LF-62
Weight:3,17 kg (7 lb)
Length:419 mm (16.50 in) butt folded, 686 mm (27 in.) butt extended
Part Length:203 mm (8 in.)
Caliber:9×19mm Parabellum
Action:Blowback
Rate:500 rounds/min
Velocity:365 m/s (1200 ft/s)
Range:25 m 82 (ft)
Feed:20 or 40-round magazine
Sights:Iron sights

The Franchi LF-57 is an submachine gun chambered in 9×19mm Parabellum designed and manufactured by the Italian Luigi Franchi.

Development

The development of the LF-57 was started by Franchi in 1956; it went into production in 1957. It shares many design features the Beretta Model 12 submachine gun, considered a rival design to the LF-57.

13,500 units of the gun were delivered to the Italian Army, as well as the 13th "Aquileia" Target Acquisition Group (Gr.Ac.O.) of the 3rd Missile Brigade "Aquileia" of Portogruaro.

In 1962 it was supplied to the COMSUBIN of the Italian Navy, but shortly afterwards it was replaced with the Beretta PM 12.[1] Subsequently, the Heckler & Koch MP5 replaced the LF-57 in the Italian Army.

10,000 copies of the weapon were also purchased by the Portuguese Army which used it in the wars in Angola, Guinea-Bissau, Mozambique and the Democratic Republic of Congo in the years immediately following independence from Belgium.

The production of this weapon continued until 1980, with a total of 30,000 examples built for the foreign market, as it was unsuccessful Italy military and law-enforcement markets.

Design

LF-57 is mainly constructed of pressed-metal. The LF-57 uses a recessed bolt head similar to the Beretta Model 12's as a method of reducing the weapon's length, although on the LF57 the bolt's mass is carried above the barrel rather than around it. This allows manufacture to be simplified to a degree. Most parts are made of stampings and pressings, and the two sides of the gun are one piece each, joined by a long seam.

Removing certain parts, such as the barrel, is simple since it's held on by one single barrel nut. The tubular butt folds to the right side of the receiver, and the pistol grip is made entirely of steel. The sights are simple fixtures on the top of the barrel.

Users

References

Notes and References

  1. Hogg, Weeks (2000)
  2. Yves. Debay. Yves Debay. Les armes de l'infanterie italienne. fr. 26–30. La Gazette des Armes. February 1987. 162. 2018-12-10. 2018-12-14. https://web.archive.org/web/20181214070122/http://fr.1001mags.com/parution/gazette-des-armes/numero-162-fevrier-1987/page-28-29-texte-integral. dead.
  3. Web site: WWII weapons in the Anya-Nya . 6 September 2021 .
  4. Jones, Richard D. Jane's Infantry Weapons 2009/2010. Jane's Information Group; 35 edition (January 27, 2009). .
  5. Les armes de Kolwezi. Jacques. Sicard. 25–30. La Gazette des armes. fr. 111. November 1982. 2018-10-18. 2018-10-19. https://web.archive.org/web/20181019075744/http://fr.1001mags.com/parution/gazette-des-armes/numero-111-novembre-1982/page-28-29-texte-integral. dead.