Ford L series explained

Ford L-series trucks
Type:Medium-duty truck
Heavy-duty truck
Manufacturer:Ford Motor Company
Production:1970-1998
1998-2009 (as Sterling)
Assembly:
Class:Class 6-8 truck
Layout:Conventional cab
Predecessor:Ford F series Super Duty and N series
Successor:Ford F-650/F-750 Super Duty (for Ford)
Sterling Trucks: A-Line, L-Line, Acterra

The Ford L-series is a range of commercial trucks that were assembled and marketed by Ford between 1970 and 1998. They are also known as Ford Louisville or, for the 1990s aerodynamic models, Ford Aeromax. The first dedicated Class 8 truck produced by the company, although Ford had been producing "Heavy Duty" trucks since 1948 and their "Super Duty" lineup since 1958. The L-Series was the successor of the F-900/F-1000 Super Duty and the Ford N-Series (both derived from the Ford F-Series). The line encompassed a wide range of models in GVWR Classes 6 through 8, as either straight trucks or as semi-tractors, with vehicles developed for medium-duty, on-highway, severe-service, and vocational applications.[1]

The L-Series was produced by Ford at its Kentucky Truck Plant near Louisville, Kentucky, alongside medium-duty F-Series trucks, and C-Series COE truck. The truck line accordingly adopted the Ford "Louisville Line" nickname;[1] for its second generation introduced in 1996, the line officially adopted the Ford Louisville nameplate. Both generations featured the Ford Aeromax aerodynamically-enhanced truck, sold primarily as a semitractor.

After the 1996 sale of the Ford heavy-truck line to Freightliner, production of the L-series was ended by Ford in 1998. Freightliner had taken over L-series production and went on to reintroduce the line as the Sterling A-line (Aeromax) and L-line (Louisville) during 1998. It continued to be built alongside the medium-duty Acterra until the end of 2009, when Freightliner closed operations of Sterling Trucks.

Background

In 1963, Ford produced a short BBC conventional medium-duty truck with the introduction of the N-series Super Duty,[2] supplementing the Super Duty models of the F-series. As Ford did with the H-series cabover (derived from the C-series and nicknamed the "Two-Story Falcon"), an all-new chassis raised the cab upward; while sharing its grille with the H-series, the N-series shared its cab with the F-series pickup trucks.

By the 1960s, Ford sought to modernize and streamline its heavy-truck line. In 1961, the heavy-duty F-series (F-750 to F-1100) became a larger, separate model line along with introduction of the all new H-series Linehauler. In 1966, the H-series was replaced by the all-new W-series cabover. In a change from adapting the F-series to become a heavy truck and to replace the N-series, Ford began design work on an all-new truck range, which became the L-series. With an all-new heavier-duty chassis, the L-series also featured a larger cab; to improve serviceability, the design included a front-hinged hood.

First generation (1970–1995)

For 1970, the L-series was introduced in four size ranges, two hood lengths and grille styles, and with single or tandem (denoted by the "T" in the model designation) rear axles. Powertrains included a wide range of gasoline and diesel engines, based on GVWR.

In 1971, Ford introduced a set-back front axle configuration. For the rest of the 1970s, the L-series saw few major changes. In 1976, the LL/LTL-9000 was introduced. Designed as a truck for long-haul drivers, the LTL-9000 was a competitor to the GMC General, Kenworth W900, Mack Super-Liner, and Peterbilt 359. Fitted with a set-forward front axle and a longer hood, this version had more room for larger powertrains. In 1981, Ford gave the LL/LTL-9000 its own grille and headlight styling, including one of the first uses of the Ford Blue Oval in North America.

Although the L-series would see few revisions throughout its production, elements of its design would see use in other Ford vehicles. In 1974, the W-series cabover received a larger grille similar to the chrome version on the L series. For 1978, the F-series/Bronco grille was given a similar egg-crate grille pattern. In the 1980 redesign of the medium-duty F- series, the hexagonal shape of the grille was carried over; it is a theme used in all Super Duty trucks since their 1998 introduction.

In 1984 (as 1985 model year), the rest of the L-series became one of the last North American Fords to adopt the Ford Blue Oval; as with the LTL-9000, it was placed above the grille. In 1988, the L-series changed its grille design from an egg-crate design to that of horizontal chrome bars; the Ford Blue Oval became centered. In addition, rectangular headlights became standard in 1991.

1992 saw the introduction of the set-back front axle version of the LL/LTL-9000, designated the LLS and LTLS-9000, along with the corresponding Aeromax versions that had more aerodynamic bumpers and optional chassis skirting.

Aeromax (1988–1995)

As a response to the aerodynamic Kenworth T600, for 1988, Ford introduced its own aerodynamic semitractor. Named AeroMax L9000, the new design was an extensive upgrade of the L-9000. While sharing the same cab of the medium hood LS-9000, the Aeromax used a set-back front axle to add a form-fitting front bumper with swept front fenders. For the first time in a North American truck, automotive-style composite headlights were used. Other aerodynamic enhancements included skirted fuel tanks and a specially designed "Aero Bullet" sleeper unit. The Aeromax L9000 was one of the most aerodynamic trucks in North America upon its introduction in 1988.[3]

Following its introduction as a semitractor, the AeroMax line expanded into the vocational truck lineup alongside the rest of the Ford L series. A later LA-8000 was introduced for "Baby 8" intra-city delivery.

1992 saw the introduction of the extended hood, set-back front axle Aeromaxes, designated LLA and LTLA-9000. These featured optional full-length chassis skirting, along with the same aero headlights and bumpers of the older medium hood LA series.

Models

The L-series came in a total of four size ranges, designated by GVWR. As with previous Ford heavy-truck tradition, gasoline-engine trucks received a three-digit model number while diesel-engine trucks were given a four-digit model number. L-600/L-6000 and L-700/L-7000 series were Class 6/7 medium-duty trucks, typically sold as straight trucks. L-800/L-8000 trucks were Class 8 trucks, typically sold in severe-service configurations. L-900/L-9000 chassis were available in all axle configurations, but were typically sold as semitractors; the LTL-9000 was only sold with a diesel engine.

1973–1977 Models

Model[4] [5] Max. GVWR Engine Trans
LN 600 24000lb 361 V8 5M, 4A
LN 700/7000 27500lb 361 V8/V175 10M, 4A
L 800/8000 35000lb 361 V8/V175 13 M
LT 800 46000lb 475 V8 13M
LT 8000 61000lb V-225
L 900/9000 35000lb 401 V8/NH230
LT 900/9000 61000lb 475 V8 / 3406 5x4M
LL 9000
LTL 9000
LTLS 9000

Powertrain

Almost all models had at least one engine option, the 9000 series had several. The 600–800 series had a Ford 330, 361,389 V8 standard, 700–900 had a 477 or 534 V8 optional. The 900 series had a 401 V8 standard. In 1979 the 361,389 V8 was replaced by a 370, and the 401 V8 was replaced by a 429; the 477,534 V8 remained an option. Detroit 6-71, 6-92, 8-71 and 8-92 were a option also.

The 7000 and 8000 series had a Caterpillar V175 standard, the 7000 had a V200 and the 8000 had a V225 available. The 9000 series had a Cummins NH230 standard, Cummins N-series with up to and Caterpillar 3406 series up to 375hp were optional.

1973 engines (not all are shown.)

Model[6] Displacement Type Power Torque Notes
Ford 361 V8 3611NaN1 G V8 138hp 250lb.ft Std 6/7/800
Ford 401 V8 4011NaN1 G V8 171hp 274lb.ft Std 900
Cat. V175 5221NaN1 D V8 352lb.ft Std 7/8000
Cat. V225 6361NaN1 D V8 225hp 530lb.ft Opt 8000
Cum. NH230 8551NaN1 D I6 Std 9000
Cum. NTC350 8551NaN1 DT I6 Opt 9000
Cat. 3406 8931NaN1 DT I6 1091lb.ft Opt 9000

Second generation (1996–1998)

For 1996, the Ford heavy-truck lines were redesigned, the second-generation heavy-truck line was nearly exclusively for Class 8 weight ranges.

Chassis weights were increased, front axle GAWRs were available up to 20000lb, single rear axles to 23000lb as before, and tandem rear axles to 46000lb. On tandems a walking beam type was standard and 2 different air suspensions were available.

In the redesign, both the Aeromax and Louisville gained a wider cab with a sloping windshield. Although Aeromax models would lose their composite headlights, it gained a much larger slope to the hood. To aid ergonomics, the Aeromax and Louisville would borrow many interior controls from other Ford vehicles. Another redesign was the grille bars, in the second generation the trucks that had extended frame bumpers knocked of the "middle" full painted piece off the grille.

Models

As was the case previously, the heavy truck line was split into aerodynamically optimized semitractors (the newly renamed Aeromax 9500) and vocational/severe-service trucks. In the case of the latter, the popularity of the Louisville nickname led Ford to drop the L-series nomenclature and adopt the Louisville nameplate officially.

1996 models

Model[7] Max. GVWR Engine Trans
LN 6000 35000lb
LN 7000 35000lb
L 8000 35000lb mid-range
LT 8000 64000lb mid-range
L 9000 35000lb
LT 9000 64000lb
LA 8000 35000lb mid-range
LA 9000 35000lb
LTA 9000 60000lb
LL 9000 35000lb
LTL 9000 60000lb

Powertrain

The second generation didn't offer gasoline or diesel V8s, all engines were inline 6 turbocharged diesels. The Caterpillar 3406 and Cummins N14 (the evolution of the NTC series) continued as heavy duty engines in the 9000 models.

1996 engines (Not all are shown)

Model Displacement Type Power Torque
Cat. 3176 6291NaN1 Mid 325hp 975lb.ft
Cat. 3406 8931NaN1 HD E 475hp 1650lb.ft
Cum. L10 6111NaN1 Mid 260hp 975lb.ft
Cum. N14 8551NaN1 HD E 460hp 1650lb.ft
DD Series 60 6771NaN1 E O
DD Series 60 7751NaN1 HD E O 450hp 1550lb.ft

End of Ford production (1998)

At the end of 1996, Ford completed the sale of its heavy-truck operations, selling the rights and production tools of the Louisville, Aeromax, and Cargo to Freightliner. Ford would end production of the Louisville/Aeromax in 1998; the truck lines would re-enter production as Sterling Trucks from 1998 to 2009; both lines were produced concurrently by Ford and Freightliner during 1998.[8]

In 1998 Sterling began production in St. Thomas, Ontario, Canada, of their L-Line 7500, 8500, 9500, and A-Line 9500. A Mercedes Benz diesel was introduced late in 2000,[9] and a very low profile "CarHauler" model was developed, otherwise there was very little change between 1998 and 2008. Production ended in 2009.[10]

Resources

Notes and References

  1. http://auto.howstuffworks.com/1970-1979-ford-trucks1.htm 1970 Ford Trucks, by Auto Editors of Consumer Guide
  2. Web site: 1963 Ford Medium Duty Trucks. Ford Motor Company. April 4, 2023.
  3. Web site: 1996 Ford Trucks . 2008-08-27 . 2012-03-05 . https://web.archive.org/web/20120305170535/http://auto.howstuffworks.com/1990-1999-ford-trucks7.htm . dead .
  4. Book: Ford L Line (sales brocure). 1973. Ford Motor Co..
  5. Book: Ford L Line 600-800 Series (sales brocure). 1977. Ford Motor Co.. 6–7.
  6. Book: Motor's Truck and Diesel Repair Manual. 26. 1973. Motor. 0-910992-16-9. 760, 763, 1066.
  7. Book: 1996 Medium/Heavy Truck Specification Book. 1996. Ford Motor Co.. VI-21.
  8. Web site: Sterling Truck launched with three models. Endeavor Business Media, LLC. . FleetOwner. March 1, 1998. https://web.archive.org/web/20210226230004/https://www.fleetowner.com/news/article/21668255/sterling-trucks-launched-with-three-models . 2021-02-26 .
  9. Web site: Sterling gets Benz power. Newcom Business Media . Truck News. 2000-12-01. https://web.archive.org/web/20161009082755/https://www.trucknews.com/features/sterling-trucks-get-benz-power/ . 2016-10-09 .
  10. Web site: Sterling Truck Sitemap. Daimler Truck North America. 2008. 28 Aug 2016.