Flyer was the first vessel ordered by the Columbia River and Puget Sound Navigation Company, a concern formed by Capt. U.B. Scott and others, which already controlled the fast sternwheeler Telephone on the Columbia River, and on Puget Sound, the then new and fast sternwheeler Bailey Gatzert as well as the express passenger boat Fleetwood. Flyer was built at the Johnson shipyard in Portland, Oregon of Douglas fir cut in Oregon and prepared for construction by prolonged storage in salt water. Unusually for an express passenger boat, Flyer included a dining room, which contributed to her great popularity.
Flyer was designed to be the fastest propeller-driven vessel in the Pacific Northwest, and was very fine-lined, that is, tall and narrow. Captain Scott was so proud of his new ship that he rode on her as she was launched into the Willamette River. This proved to be a mistake. Neither boilers nor engines had been installed in Flyer before launch, and without their weight deep in her hull to act as ballast, she simply flopped over in the water, and Captain Scott had to exit by climbing out a window.[3] After that, another hull was built around her with the hope of making her a little less top–heavy, but this was imperfectly sealed, so water sloshed around in between the hulls for the rest of the vessel's operational life. Surprisingly, this did not affect the Flyers speed, although she did acquire a permanent list to port, or at least the hint of a list.[1] [3] Once finally completed, the company sent Flyer to Puget Sound and brought Bailey Gatzert around to the Columbia River to run with the Telephone.
Flyer was powered by a triple compound steam engine built by the Philadelphia firm of Neafie and Levy. It was a duplicate of one installed in J.P. Morgan's yacht Corsair. The bore sizes for the three cylinders, from high pressure to low pressure, were 21¼ʺ, 33½ʺ, and 54½ʺ, all with 30ʺ stroke. The engine drew national attention when it was built.[4] It rose above the passenger deck, and passengers looked forward to watching the huge low-pressure cylinder, almost five feet across, drive the vessel at high speed.[1]
The original steel boiler, built by Willamette Iron and Steel Works, of Portland, Oregon, generated steam at 160 pounds/inch² pressure. It was 80NaN0 long and 290NaN0. The boiler was replaced in 1899 with a two-furnace locomotive boiler constructed by Freeman & Sons of Racine, Wisconsin.[1]
Flyer was originally a wood burner, consuming 24 cords of wood during every day of operation.[5] Her firebox could hold two cords of wood.[4] In 1906, she was converted to oil fuel, and was considered to be fuel-efficient, burning an average of 61oilbbl of oil on a daily basis. Although her engine was capable of generating at 200 pounds steam pressure, at no time was she ever equipped with a boiler that generated more than 150 pounds of steam, thus her engine never could produce more than . H.D. Collier worked on the Flyer, qualifying for his engineer's license. Collier later became chairman of Standard Oil of California.[1] [3]
Flyer was placed on the run from Seattle to Tacoma. Her first master was Capt. Harry K. Struve (1866–1924), and her first pilot was Capt. Henry Carter (1858–1930). The run was 28miles long one way, and Flyer routinely completed it in less than 90 minutes. This was the beginning of many years of successful timely service, so much so that the Flyers advertising slogan became "Fly on the Flyer".[1]
Flyer's career was almost ended at midnight on 14 June 1892, by a fire which started when she was taking on wood for fuel at the Commercial Dock in Seattle. Within five minutes the fire had swept through the vessel. The fireboat Snoqualmie and all available units of the Seattle fire department, under Chief Gardner Kellogg, responded to the fire. They were able to get the fire under control before serious damage was done to the hull or machinery. However, all of the vessel's upper works were destroyed. Flyer was quickly rebuilt and returned to service by the end of the summer of 1892. She made four daily round-trips between Seattle and Tacoma.
In 1900, there appeared on the Sound the Imp, one of the fastest steam launches ever built to that time. Imp was just 50feet long, but could go 22kn with a boiler that generated steam at the then extraordinary pressure of 400 pounds. Imp bested Flyer on the Tacoma run by eight minutes before she was shipped to Lake Coeur d'Alene in Idaho.
Flyer ran an average of 344 days a year, and had a public reputation of high reliability. In 1908 it was calculated that Flyer had completed enough trips from Seattle to Tacoma to go around the world 61 times, and had carried over 3,000,000 people, more than the population of New York City at the time, and this without serious injury to any passenger. This does not mean there were no accidents – over the years, she was involved in several accidents, collisions and fires, including some which threatened the lives of her passengers or those of other vessels:
In 1906, Flyer had an extensive overhaul and conversion to oil fuel to allow her to compete with the newer steel steamers that the Puget Sound Navigation Company had purchased in the Great Lakes and brought round South America. One in particular, Indianapolis, was being placed on the Seattle-Tacoma run in direct opposition to the Flyer. Passenger traffic on Puget Sound was then very high. In 1907, so many people wanted to travel to Tacoma on the Flyer that they were regularly turned away at the dock.[6]
By 1910, the Puget Sound Navigation Company was well on its way towards achieving a monopoly on marine transport on Puget Sound, with the Flyer the only remaining major vessel still running against them. Flyer, although older, had a number of advantages over Indianapolis (then known as the Indian) and the other steel vessels.
From 1907 to 1911 the competition between the Flyer and the Indian continued. This was pursued on both sides by a variety of tactics, including Flyers honoring the tickets of the Indians passengers just as the Indian was boarding.[5] The Puget Sound Navigation Company became so desperate they started calling their own Indianapolis the "white Flyer" in their advertising.[1] That didn't work, as the public still preferred the real Flyer. Finally the Puget Sound Navigation Company, realizing they were beaten, bought the Flyer on 7 June 1911. Said Joshua Green, PSN's president:
A few days after the monopoly bought her, Flyer was placed on the Seattle to Everett route. She made a few trips under Capt. Charles Brydsen, and then Capt. Frank Clements, who had been first officer on the Tacoma run under Captain Coffin, was appointed to her command. Flyer broke all records on the Everett run, as she had done on the Tacoma route. She could complete the entire run, including a 12-minute stop at Edmonds in 1:50 hours, making an average speed over the route of 18.5 miles/hour. Later, when the sternwheeler Telegraph hit a snag on the Tacoma route, Flyer was put back on her old run until 1918 as a relief boat.
On 12 May 1912, Flyer was at Colman Dock, disembarking passengers from Tacoma as several hundred people waited to board. Normally passengers boarded Flyer by a single gangway that extended from the waiting room on the upper level of the pier structure. However, a few weeks before, the steamer Alameda had collided with Colman dock, destroying a good part of it. As a result, passengers were no longer using the usual boarding method, but instead were using the freight gangways, located on the lower level of the pier. The freight gangplanks were large ramps 800NaN0 and long 80NaN0 wide. They were permanently hinged to the dock, and lowered down onto the steamer's deck, somewhat like a drawbridge. On this day there was an extreme low tide as the flyer approached the dock, and the freight ramp could not reach the deck of the Flyer. For this reason the Flyers own gangplank was extended out to the end of the freight ramp, which was supposedly held up with chains.[7]
The Flyer's gangplank was extended out to one of these freight loading slips. As the passengers were boarding, the slip locking mechanism gave way, the ramp collapsed into the water, and 50 people were tumbled into the sound. The captain of the Flyer saw the accident and immediately blew the emergency whistle. The fireboat Snoqualmie, which had come to the aid of the Flyer twenty years before, now again went to her assistance, as did the launch Skeeter, skipper Roy Lillico, and boat of the Rosalie, in charge of mate Louis Van Bogaert. The captain ordered the crew to toss life preservers and anything else floatable to the people struggling in the water. Major League baseball player, Rex DeVogt, assisted in the rescue, spending over an hour attempting to resuscitate one-year-old Carl Bruder.[8] Within ten minutes, all but two people, Mrs. G.V. Leonard and Bruder, had been saved. Their tragic drownings broke the Flyer's long record of passenger safety.[7]
In 1918, Flyer was reconstructed at Seattle, renamed Washington and called up by the Navy for wartime service. By this time she had steamed over two million miles. After war service, she was returned to the Puget Sound Navigation Co. and maintained as a spare boat. She was also used for special excursions for about ten years. Despite the official change of name, apparently done to forestall rumors of unseaworthiness, the Washington continued to be known to her patrons as the Flyer.[3] Every steamboat had a distinctive whistle, and people on the water or ashore knew by sound what vessel was near by the sound of the whistle. The Flyers whistle was preserved, and is now mounted on the only surviving Puget Sound wooden steamer, the Virginia V.[9] Flyers compound steam engine was still in running order in 1929.[5]
On 12 June 1929, Flyer was towed to Richmond Beach, Washington, and burned for her metal.[7] Of this, the Tacoma Ledger wrote: