Flat module explained

In algebra, flat modules include free modules, projective modules, and, over a principal ideal domain, torsion-free modules. Formally, a module M over a ring R is flat if taking the tensor product over R with M preserves exact sequences. A module is faithfully flat if taking the tensor product with a sequence produces an exact sequence if and only if the original sequence is exact.

Flatness was introduced by in his paper Géometrie Algébrique et Géométrie Analytique.

Definition

\varphi:K\toL

of right -modules, the map

\varphiRM:KRM\toLRM

is also injective, where

\varphiRM

is the mapinduced by

km\mapsto\varphi(k)m.

For this definition, it is enough to restrict the injections

\varphi

to the inclusions of finitely generated ideals into .

Equivalently, an -module is flat if the tensor product with is an exact functor; that is if, for every short exact sequence of -modules

0 → KLJ0,

the sequence

0 → KRMLRMJRM0

is also exact. (This is an equivalent definition since the tensor product is a right exact functor.)

These definitions apply also if is a non-commutative ring, and is a left -module; in this case,, and must be right -modules, and the tensor products are not -modules in general, but only abelian groups.

Characterizations

Flatness can also be characterized by the following equational condition, which means that -linear relations in stem from linear relations in .

A left -module is flat if and only if, for every linear relation

\sum_^m r_i x_i = 0with

ri\inR

and

xi\inM

, there exist elements

yj\inM

and

ai,j\inR,

such that

\sum_^m r_ia_=0\qquad for

j=1,\ldots,n,

and

x_i=\sum_^n a_ y_j\qquad for

i=1,\ldots,m.

It is equivalent to define elements of a module, and a linear map from

Rn

to this module, which maps the standard basis of

Rn

to the elements. This allows rewriting the previous characterization in terms of homomorphisms, as follows.

An -module is flat if and only if the following condition holds: for every map

f:F\toM,

where

F

is a finitely generated free -module, and for every finitely generated -submodule

K

of

\kerf,

the map

f

factors through a map to a free -module

G

such that

g(K)=0:

Relations to other module properties

Flatness is related to various other module properties, such as being free, projective, or torsion-free. In particular, every flat module is torsion-free, every projective module is flat, and every free module is projective.

There are finitely generated modules that are flat and not projective. However, finitely generated flat modules are all projective over the rings that are most commonly considered. Moreover, a finitely generated module is flat if and only it is locally free, meaning all the localizations at prime ideals are free modules.

This is partly summarized in the following graphic.

Torsion-free modules

Every flat module is torsion-free. This results from the above characterization in terms of relations by taking .

The converse holds over the integers, and more generally over principal ideal domains and Dedekind rings.

An integral domain over which every torsion-free module is flat is called a Prüfer domain.

Free and projective modules

A module is projective if and only if there is a free module and two linear maps

i:M\toG

and

p:G\toM

such that

p\circi=idM.

In particular, every free module is projective (take

G=M

and

Every projective module is flat. This can be proven from the above characterizations of flatness and projectivity in terms of linear maps by taking

g=i\circf

and

h=p.

Conversely, finitely generated flat modules are projective under mild conditions that are generally satisfied in commutative algebra and algebraic geometry. This makes the concept of flatness useful mainly for modules that are not finitely generated.

A finitely presented module (that is the quotient of a finitely generated free module by a finitely generated submodule) that is flat is always projective. This can be proven by taking surjective and

K=\kerf

in the above characterization of flatness in terms of linear maps. The condition

g(K)=0

implies the existence of a linear map

i:M\toG

such that

i\circf=g,

and thus

h\circi\circf=h\circg=f.

As is surjective, one has thus

h\circi=idM,

and is projective.

Over a Noetherian ring, every finitely generated flat module is projective, since every finitely generated module is finitely presented. The same result is true over an integral domain, even if it is not Noetherian.

On a local ring every finitely generated flat module is free.

A finitely generated flat module that is not projective can be built as follows. Let

R=FN

be the set of the infinite sequences whose terms belong to a fixed field . It is a commutative ring with addition and multiplication defined componentwise. This ring is absolutely flat (that is, every module is flat). The module

R/I,

where is the ideal of the sequences with a finite number of nonzero terms, is thus flat and finitely generated (only one generator), but it is not projective.

Non-examples

R/I

is not a flat module, except if is generated by an idempotent (that is an element equal to its square). In particular, if is an integral domain,

R/I

is flat only if

I

equals or is the zero ideal.

\Q/\Z

and all fields of positive characteristics are non-flat

\Z

-modules, where

\Z

is the ring of integers, and

\Q

is the field of the rational numbers.

Direct sums, limits and products

styleoplusiMi

of modules is flat if and only if each

Mi

is flat.

A direct limit of flat is flat. In particular, a direct limit of free modules is flat. Conversely, every flat module can be written as a direct limit of finitely-generated free modules.

Direct products of flat modules need not in general be flat. In fact, given a ring, every direct product of flat -modules is flat if and only if is a coherent ring (that is, every finitely generated ideal is finitely presented).

Flat ring extensions

R\toS

is flat if is a flat -module for the module structure induced by the homomorphism. For example, the polynomial ring is flat over, for any ring .

S

of a commutative ring

R

, the localization

S-1R

is a flat -algebra (it is projective only in exceptional cases). For example,

\Q

is flat and not projective over

\Z.

If

I

is an ideal of a Noetherian commutative ring

R,

the completion

\widehat{R}

of

R

with respect to

I

is flat. It is faithfully flat if and only if

I

is contained in the Jacobson radical of

A.

(See also Zariski ring.)

Local property

In this section, denotes a commutative ring. If

akp

is a prime ideal of, the localization at

akp

is, as usual, denoted with

akp

as an index. That is,

Rakp=(R\setminusakp)-1R,

and, if is an -module,

Makp=(R\setminusakp)-1M=RakpRM.

If is an -module the three following conditions are equivalent:

M

is a flat

R

-module;

Makp

is a flat

Rakp

-module for every prime ideal

akp;

Makm

is a flat

Rakm

-module for every maximal ideal

akm.

This property is fundamental in commutative algebra and algebraic geometry, since it reduces the study of flatness to the case of local rings. They are often expressed by saying that flatness is a local property.

Flat morphisms of schemes

The definition of a flat morphism of schemes results immediately from the local property of flatness.

A morphism

f:X\toY

of schemes is a flat morphism if the induced map on local rings

lOY,\tolOX,x

is a flat ring homomorphism for any point in .

Thus, properties of flat (or faithfully flat) ring homomorphisms extends naturally to geometric properties of flat morphisms in algebraic geometry. For example, consider the flat

C[t]

-algebra

R=C[t,x,y]/(xy-t)

(see below). The inclusion

C[t]\hookrightarrowR

induces the flat morphism

\pi:\operatorname{Spec}(R)\to\operatorname{Spec}(C[t]).

Each (geometric) fiber

\pi-1(t)

is the curve of equation

xy=t.

(See also flat degeneration and deformation to normal cone.)

Let

S=R[x1,...,xr]

be a polynomial ring over a commutative Noetherian ring

R

and

f\inS

a nonzerodivisor. Then

S/fS

is flat over

R

if and only if

f

is primitive (the coefficients generate the unit ideal). An example is

C[t,x,y]/(xy-t),

which is flat (and even free) over

C[t]

(see also below for the geometric meaning). Such flat extensions can be used to yield examples of flat modules that are not free and do not result from a localization.

Faithful flatness

A module is faithfully flat if taking the tensor product with a sequence produces an exact sequence if and only if the original sequence is exact. Although the concept is defined for modules over a non-necessary commutative ring, it is used mainly for commutative algebras. So, this is the only case that is considered here, even if some results can be generalized to the case of modules over a non-commutaive ring.

In this section,

f\colonR\toS

is a ring homomorphism of commutative rings, which gives to

S

the structures of an

R

-algebra and an

R

-module. If

S

is a

R

-module flat (or faithfully flat), one says commonly that

S

is flat (or faithfully flat) over

R,

and that

f

is flat (or faithfully flat).

If

S

is flat over

R,

the following conditions are equivalent.

S

is faithfully flat.

ak{m}

of

R

, one has

ak{m}S\neS.

M

is a nonzero

R

-module, then

MRS\ne0.

ak{p}

of

R,

there is a prime ideal

ak{P}

of

S

such that

ak{p}=f-1(akP).

In other words, the map

f*\colon\operatorname{Spec}(S)\to\operatorname{Spec}(R)

induced by

f

on the spectra is surjective.

f,

is injective, and

R

is a pure subring of

S;

that is,

M\toMRS

is injective for every

R

-module

M

.

The second condition implies that a flat local homomorphism of local rings is faithfully flat. It follows from the last condition that

I=IS\capR

for every ideal

I

of

R

(take

M=R/I

). In particular, if

S

is a Noetherian ring, then

R

is also Noetherian.

The last but one condition can be stated in the following strengthened form:

\operatorname{Spec}(S)\to\operatorname{Spec}(R)

is submersive, which means that the Zariski topology of

\operatorname{Spec}(R)

is the quotient topology of that of

\operatorname{Spec}(S)

(this is a special case of the fact that a faithfully flat quasi-compact morphism of schemes has this property.). See also .

Examples

R\toS

such that

S

is a nonzero free -module is faithfully flat. For example:

p\inR[x]

is a monic polynomial, the inclusion

R\hookrightarrowR[t]/\langlep\rangle

is faithfully flat.

t1,\ldots,tk\inR.

The direct product

style\prodi

-1
R[t
i

]

of the localizations at the

ti

is faithfully flat over

R

if and only if

t1,\ldots,tk

generate the unit ideal of

R

(that is, if

1

is a linear combination of the

ti

).

Rakp

of

R

at all its prime ideals is a faithfully flat module that is not an algebra, except if there are finitely many prime ideals.

The two last examples are implicitly behind the wide use of localization in commutative algebra and algebraic geometry.

f:A\toB,

there is an associated complex called the Amitsur complex:[1] 0 \to A \overset\to B \overset\to B \otimes_A B \overset\to B \otimes_A B \otimes_A B \to \cdotswhere the coboundary operators

\deltan

are the alternating sums of the maps obtained by inserting 1 in each spot; e.g.,

\delta0(b)=b1-1b

. Then (Grothendieck) this complex is exact if

f

is faithfully flat.

Faithfully flat local homomorphisms

Here is one characterization of a faithfully flat homomorphism for a not-necessarily-flat homomorphism. Given an injective local homomorphism

(R,akm)\hookrightarrow(S,akn)

such that

ak{m}S

is an

ak{n}

-primary ideal, the homomorphism

S\toB

is faithfully flat if and only if the theorem of transition holds for it; that is, for each

akm

-primary ideal

akq

of

R

,

\operatorname{length}S(S/akqS)=\operatorname{length}S(S/ak{m}S)\operatorname{length}R(R/akq).

Homological characterization using Tor functors

Flatness may also be expressed using the Tor functors, the left derived functors of the tensor product. A left

R

-module

M

is flat if and only if
R
\operatorname{Tor}
n

(X,M)=0

for all

n\ge1

and all right

R

-modules

X

).In fact, it is enough to check that the first Tor term vanishes, i.e., M is flat if and only if
R
\operatorname{Tor}
1

(N,M)=0

for any

R

-module

N

or, even more restrictively, when

N=R/I

and

I\subsetR

is any finitely generated ideal.

Using the Tor functor's long exact sequences, one can then easily prove facts about a short exact sequence

0\toA\overset{f}{\longrightarrow}B\overset{g}{\longrightarrow}C\to0

If

A

and

C

are flat, then so is

B

. Also, if

B

and

C

are flat, then so is

A

. If

A

and

B

are flat,

C

need not be flat in general. However, if

A

is pure in

B

and

B

is flat, then

A

and

C

are flat.

Flat resolutions

A flat resolution of a module

M

is a resolution of the form

\toF2\toF1\toF0\toM\to0,

where the

Fi

are all flat modules. Any free or projective resolution is necessarily a flat resolution. Flat resolutions can be used to compute the Tor functor.

The length of a finite flat resolution is the first subscript n such that

Fn

is nonzero and

Fi=0

for

i>n

. If a module

M

admits a finite flat resolution, the minimal length among all finite flat resolutions of

M

is called its flat dimension and denoted

\operatorname{fd}(M)

. If

M

does not admit a finite flat resolution, then by convention the flat dimension is said to be infinite. As an example, consider a module

M

such that

\operatorname{fd}(M)=0

. In this situation, the exactness of the sequence

0\toF0\toM\to0

indicates that the arrow in the center is an isomorphism, and hence

M

itself is flat.

In some areas of module theory, a flat resolution must satisfy the additional requirement that each map is a flat pre-cover of the kernel of the map to the right. For projective resolutions, this condition is almost invisible: a projective pre-cover is simply an epimorphism from a projective module. These ideas are inspired from Auslander's work in approximations. These ideas are also familiar from the more common notion of minimal projective resolutions, where each map is required to be a projective cover of the kernel of the map to the right. However, projective covers need not exist in general, so minimal projective resolutions are only of limited use over rings like the integers.

Flat covers

While projective covers for modules do not always exist, it was speculated that for general rings, every module would have a flat cover, that is, every module M would be the epimorphic image of a flat module F such that every map from a flat module onto M factors through F, and any endomorphism of F over M is an automorphism. This flat cover conjecture was explicitly first stated in . The conjecture turned out to be true, resolved positively and proved simultaneously by L. Bican, R. El Bashir and E. Enochs. This was preceded by important contributions by P. Eklof, J. Trlifaj and J. Xu.

Since flat covers exist for all modules over all rings, minimal flat resolutions can take the place of minimal projective resolutions in many circumstances. The measurement of the departure of flat resolutions from projective resolutions is called relative homological algebra, and is covered in classics such as and in more recent works focussing on flat resolutions such as .

In constructive mathematics

Flat modules have increased importance in constructive mathematics, where projective modules are less useful. For example, that all free modules are projective is equivalent to the full axiom of choice, so theorems about projective modules, even if proved constructively, do not necessarily apply to free modules. In contrast, no choice is needed to prove that free modules are flat, so theorems about flat modules can still apply.

See also

References

Notes and References

  1. Web site: Amitsur Complex . ncatlab.org.