The Fairchild Hiller FH-1100 is a single-engine turbine, single two-bladed rotor, light helicopter that was designed and produced by the American aircraft manufacturer Fairchild Hiller in the 1960s.
Originally designated as the Model 1100, it was produced as the company's design submission for the United States Army's Light Observation Helicopter (LOH) program. It was one of the three winning designs in May 1961, after which the military designation Hiller YOH-5 was assigned; the prototype performed its maiden flight on 21 January 1963. However, following extensive evaluations of the type, the Model 1100 did not receive a production contract after Hiller was underbid by the rival Hughes Tool Co. Aircraft Division's OH-6 Cayuse in 1965.
Shortly following the purchase of Hiller Aircraft by Fairchild Engine and Airplane Corporation during 1964, the company decided to focus its efforts on the Model 1100, which was marketed as the FH-1100, towards other opportunities, both on the civilian market and with international military air services. Quantity production of the FH-1100 came to an end in 1973; support for existing operators was maintained. Manufacturing was briefly restarted during the 1980s, but did not achieve large numbers. The type certificate is presently held by the FH1100 Manufacturing Corporation of Century, Florida.[1]
During the 1940s and 1950s, the American company Hiller Aircraft had established itself as an early participant in the design and production of helicopters, producing the Hiller Model 360 for various customers. In 1960, Hiller merged with the Electra Corporation and made considerable investments into their production range, developing an improved Model 360 and seeking out other business opportunities for rotorcraft.[2] Simultaneously, in October 1960, the United States Army issued a request for proposals (RFP) for the Light Observation Helicopter (LOH) program. Months later, Hiller, along with 12 other manufacturers, including Bell Helicopter (Bell) and Hughes Tool Co. Aircraft Division (Hughes), decided to respond and formally entered the competition.[3]
Hiller's submission was internally designated as the Model 1100.[2] All of the submissions were evaluated by a United States Navy team, which recommended the Model 1100 and led to it being selected as one of three winners of the design competition by the Army in May 1961.[4] Accordingly, the Army officially designated the Model 1100 as the Hiller YOH-5.[5] [6] During November 1961, detailed design work on the YOH-5 commenced.
On 21 January 1963, the prototype YOH-5 conducted its maiden flight. Hiller produced a total of five aircraft that were delivered to the U.S. Army, which put them through a Test and Evaluation exercise at Camp Rucker, Alabama in 1963. The performance of the three company's designs were competitively evaluated against one another as well as the specification requirements, leading to the rival Bell YOH-4 being eliminated from the program while Hiller and Hughes competed in a program cost analysis phase to receive a production contract. In 1965, it was determined that Hughes had underbid Hiller's submission and that the Army had selected Hughes' YOH-6 instead. Despite Hiller filing a formal protest, their submission was formally eliminated and Hughes was awarded a production contract for the OH-6 Cayuse.[7] [8]
During 1967, as a result of price escalations for both the OH-6 and associated components, the U.S. Army decided Hughes that could not fulfil the contractual production demands and opted to reopen bids for the LOH program.[9] Despite this apparent reversal of fortunes, Fairchild-Hiller decided that it would not resubmit the YOH-5A to the competition, or make any submission; instead, the company would focus its efforts upon on the commercial sector, to which it was already marketing a civil model of the Model 1100.[10] Even prior to the LOH program being reopened to bids, Hiller had decided to continue development of the Model 1100, which it marketed as the FH-1100.[2] [7]
In 1964, Hiller had been acquired by the Fairchild Engine and Airplane Corporation to become Fairchild-Hiller; shortly thereafter, the new company decided to discontinue its activity on older rotorcraft in order to focus its resources on the FH-1100, which it would market primarily towards civilian customers, as well as to various international military air services.[2] While early operators of the FH-1100 were impacted by a serious issue with the Allison Model 250-C18 turboshaft powerplant it used, the exhibited failure rate was less than that of the competing Bell 206A JetRanger.[11]
During 1973, due to a lack of orders, production of the FH-1100 was terminated; however, support for those rotorcraft that had already been produced was maintained. The rights to the rotorcraft were obtained by Hiller Aviation; while preparations were made to resume quantity production, but wider corporate matters proved disruptive to this ambition.[2] In April 1984, the Rogerson Aircraft Corporation acquired Hiller and, under the name Rogerson Hiller Helicopters, produced five FH-1100s over a four-year period up to 1987.[2] The company also had plans to develop an enlarged derivative.[12] In 2000, the Type Certificate was purchased by FH1100 Manufacturing Corporation. In the following years, FH1100 Manufacturing has announced its intention to resume manufacturing of the type, which will reportedly include the updating and redesign of various components such as the rotor blades, nose, and cockpit.[13] In addition, the company provides support and training services to operators of existing FH-1100s.[14]
The Fairchild Hiller FH-1100 is a single-engine, single two-bladed rotor, light helicopter. It is a relatively conventional rotorcraft, featuring an extensive cockpit glazing that provides favourable external visibility and provides seating for four passengers in addition to the pilot.[7] [15] The interior is designed to suit various purposes, from a four-seat configuration intended for executive travel to a more compact five-seat arrangement; provisions for its use as both a military and utility helicopter were made from the onset. The FH-1100 is equipped with skid landing gear that is suitable for austere or rough field operations.[7] [15]
The FH-1100 is powered by a single Allison Model 250-C18 turboshaft engine, capable of generating up to 317 shp (236 kW); it provided a considerable boost in performance over that of piston-powered contemporaries. However, in comparison to the similar-sized Bell 206A JetRanger, the FH-1100 has a lower continuous maximum speed and a reduced load-carrying capacity, despite sharing the same engine.[15] Advantages over the JetRanger included a cheaper purchase cost and the inclusion of a stability augmentation system. The FH-1100 also had a greater hover ceiling than most contemporary helicopters of its size.[15] Various considerations for ease of maintenance were also incorporated into various aspects of the rotorcraft, such as engine access.[15]