The French: épée (in French epe/; "sword"), also rendered as epee in English, is the largest and heaviest of the three weapons used in the sport of fencing. The modern French: épée derives from the 19th-century French: épée de combat,[1] a weapon which itself derives from the French small sword.[2]
As a thrusting weapon, the French: épée is similar to a foil (contrasted with a sabre, which is designed for slashing). It has a stiffer blade than a foil. It is triangular in cross-section with a V-shaped groove called a fuller. The French: épée also has a larger bell guard designed to protect the user’s arm. In addition to the larger "bell" guard and blade, the French: épée weighs more than the foil and sabre which contributes to its reputation of being the slowest form of fencing. The techniques of use differ, as there are no rules regarding priority and right of way. Thus, immediate counterattacks are a common feature of French: épée fencing. The entire body is a valid target area.
While the modern sport of fencing has three weapons — foil, French: épée, and sabre, each a separate event — the French: épée is the only one in which the entire body is the valid target area (the others are restricted to varying areas above the waist). The French: épée is the heaviest of the three modern fencing weapons. As with all fencing disciplines, fencing matches with the French: épée require concentration, accuracy, and speed. Since the entire body is a target, a successful French: épée fencer must be able to anticipate the opponent's moves and strike the opponent at the correct time.
In the highest-level competitions, an electrically grounded (earthed) piste is used to prevent floor hits from registering as touches. In French: épée fencing, unlike in the other two disciplines, there are no right-of-way rules regarding attacks, other than the aforementioned rule regarding touches with only the point of the weapon. Touches are awarded solely on the basis of which fencer makes a touch first, according to the electronic scoring machines. Also, double-touches are allowed in French: épée, although the touches must occur within 40 milliseconds (of a second) of each other.
A special aspect of the French: épée discipline is the counterattack, a tactic employed in response to an attack. Some specifications include two varieties, the stop-thrust and the time thrust, which are (respectively) a simple counterattack and a counterattack on the opposition. With the absence of right-of-way, following an attack and landing a counterattack correctly can be a highly efficient way to score a touch, hence the counterattack's ubiquity in French: épée fencing.
A modern French: épée, of size 5, for use by adult fencers has a blade that measures 90cm (40inches) from the guard to the tip. The total weight of the weapon ready for use is less than 770g,[3] with most competition weapons being much lighter, weighing NaNg. French: Épées for use by children under 13 are shorter and lighter (e.g. size 2), making it easier for them to use.
The blade of an French: épée is triangular in section, whereas that of a foil is rectangular, and neither blade has a cutting edge. Wires may run down a groove in French: épée blades fitted for electric scoring, with a depressible button capping the point. In competitive fencing, the width of any of the three sides of an French: épée's blade is limited to 24mm.
The guard has numerous forms, but all are essentially a hemispherical shield, the section of which fits in a NaNcm (-2,147,483,648inches) cylinder.[4] This is frequently called a bell guard. As the hand is a valid target in competitive fencing, the guard is much larger and more protective than that of a foil, having a depth of NaNcm (-2,147,483,648inches) and a diameter more likely to be toward the maximum of 13.5cm (05.3inches).
As with a foil, the grip of an French: épée can be exchanged for another if it has a screw-on pommel. Grip options primarily include the French grip and the pistol grip.
In competitions, a valid touch is scored if a fencer's weapon touches the opponent with enough force to depress the tip; by rule, this is a minimum of 750abbr=onNaNabbr=on. The tip is wired to a connector in the guard, then to an electronic scoring device or "box". The guard, blade, and handle of the French: épée are all grounded to the scoring box to prevent hits to the weapon from registering as touches.
In the groove formed by the V-shaped blade, there are two thin wires leading from the far end of the blade to a connector in the guard. These wires are held in place with a strong glue. The amount of glue is kept to a minimum as in the unlikely (but possible) case that a fencer manages a touch in that glue, the touch would be registered on the electrical equipment, as the glue is not conductive (the blade is grounded). In the event of tip to tip hits, a point should not be awarded. A "body cord" with a three-pronged plug at each end is placed underneath the fencer's clothing and attached to the connector in the guard, then to a wire leading to the scoring box. The scoring box signals with lights (one for each fencer) and a tone each time the tip is depressed.
The tip of an electric French: épée, called the "button", comprises several parts: the mushroom-shaped, movable French: pointe d'arrêt ('point of arrest') at the end; its housing or "barrel" which is threaded onto the blade; a contact spring; and a return spring. The tips are generally held in place by two small grub screws, which thread into the sides of the tip through elongated openings on either side of the barrel. The screws hold the tip within the barrel but are allowed to travel freely in the openings. While this is the most common system, screwless variations do exist. The return spring must allow the tip to support a force of 750g-f without registering a touch. Finally, an épée tip must allow a shim of 1.5mm to be inserted between the French: pointe d'arrêt and the barrel, and when a 0.5mm shim is inserted and the tip depressed, it should not register a touch.[5] The contact spring is threaded in or out of the tip to adjust for this distance. These specifications are tested at the start of each bout during competitions. During competitions, fencers are required to have a minimum of two weapons and two body wires in case of failure or breakage.
Bouts with the different fencing weapons have a different tempo; as with foil fencing, the tempo for an French: épée bout is rather slow with sudden bursts of speed, but these are more common in French: épée due to counterattacks.
The French word French: [[wikt:épée|épée]] ultimately derives from Latin Latin: [[spatha]]. The term was introduced into English in the 1880s for the sportive fencing weapon.
Like the foil (French: fleuret|link=no), the French: épée evolved from light civilian weapons such as the small sword, which, since the late 17th century, had been the most commonly used dueling sword, replacing the rapier.
The dueling sword developed in the 19th century when, under pressure from the authorities, duels were more frequently fought until "first blood" only, instead of to the death. Under this provision, it became sufficient to inflict a minor nick on the wrist or other exposed area on the opponent in order to win the duel. This resulted in emphasis on light touches to the arm and hand, while downplaying hits to the torso (chest, back, groin). Rapiers with full-cup guards had been made since the mid 17th century, but were not widespread before the 19th century.
Today, French: épée fencing somewhat resembles 19th-century dueling. An French: épée fencer must hit the target with the tip of the weapon. A difference between French: épée versus both foil and sabre is that French: corps-à-corps (body-to-body) contact between fencers is not necessarily an offense in French: épée, unless it is done with "brutality or violence".
In the pre-electric era, French: épée fencers used a different kind of French: point d'arrêt, a three-pronged point with small protruding spikes, which would snag on the opponent's clothing or mask, helping the referee to see the hits. The spikes caused French: épée fencing to be a notoriously painful affair, and French: épée fencers could be easily recognized by the tears in their jacket sleeves. A later evolution of the sport used a point that was dipped in a dye, which showed the location of touches on a white uniform; the dye was soluble in weak acid (e.g., acetic acid) to remove old marks.[6] Today, competition is done with electric weapons, where a circuit is closed when the touch is made. Non-electric weapons are now typically used only for practice, generally fitted with plastic buttons or solid "dummy points".
In 2007, MIT fencing coach Eric Sollee and his student Johan Harmenberg authored a book that explored a line of tactical thought that diverged from fencing styles established in the 1970s and 1980s. Harmenberg won the World Fencing Championships and the Olympic gold medal using this strategic approach, built on what he called the "Sollee conjectures" or the "three conjectures":[7]
They credited the system for helping Harmenberg close the fencing distance, use absence of blade with destructive parries to prevent opponents from their own strongest moves, and pushing them into attacking higha prerequisite for Harmenberg using his own strongest move. Harmenberg used this approach to win eight individual and team gold medals at Olympics, World Fencing Championships, and Fencing World Cup competitions.[8]