Dredge No. 4 Explained

Dredge No. 4
Classification:Gold dredge
Industry:Gold mining

Dredge No. 4 (Hän: Lëzrą Kä̀nëchà "s/he is looking for money") is a wooden-hulled bucketline sluice dredge that mined placer gold on the Yukon River from 1913 until 1959. It is now located along Bonanza Creek Road 13km (08miles) south of the Klondike Highway near Dawson City, Yukon, where it is preserved as one of the National Historic Sites of Canada. It is the largest wooden-hulled dredge in North America.

With its 72 large buckets, the dredge excavated gravel at the rate of 22 buckets per minute, processing 18000cuyd of material per day. It was in use from late April or early May until late November each season, and sometimes throughout winter. During its operational lifetime, it captured nine tons of gold.

Background

About 1.5km (00.9miles) south of the dredge's current site, further into the Klondike Valley, is the Discovery Claim where gold was found in August 1896 by prospector George Carmack, his Tagish wife Kate, her brother Skookum Jim, and their nephew Dawson Charlie. This is considered the site where the Klondike Gold Rush began.

Integral to the operation of the dredge were the services available at Dawson City. There, financial services provided by the banks, administrative services provided by the Government of Canada, and the rail and steamship transportation network terminating at the city ensured that machinery needed for operation of the dredge would be readily supplied.

The Canadian Klondyke Mining Company built the Twelve Mile ditch in 1909, which would supply the water to operate hydraulic monitors on dredges. It also built dams and ditches to generate hydroelectricity, and by 1911 the 7500kW North Fork Hydro Power Plant was operational about 50km (30miles) from the dredges it energized.

History

Designed by the Marion Steam Shovel Company, the bucketline sluice dredge was built on site at Claim 112 Below Discovery from mid 1912 until the onset of winter. The assembly site was near Ogilvie Bridge, named for William Ogilvie, near the current location of the bridge carrying the Klondike Highway to Dawson City. Construction was supervised by Howard Brenner, an engineer employed by the Marion Steam Shovel Company, who also supervised construction of Dredge No. 3 at the same time. A contract for the parts dated 13 March 1912 specified their shipment to the site in the summer of 1912, at a cost of $134,800 for each dredge, and the hull was built by the Canadian Klondike Mining Company.

The Canadian Klondyke Mining Company began operating the dredge in May 1913. After eleven years of operation, it had cut its way to the Boyle Concession, where it sank in 1924. By 1927, it had been refloated and worked its way to Hunker Creek, where it could produce up to 800oz of gold a day at claim 67 Below Discovery. It ceased operations in the area on 11 July 1940, and was rebuilt by the Yukon Consolidated Gold Corporation on Bonanza Creek, where it resumed operations on 11 September 1941. The wooden hull of the original dredge was discarded, left in the pond where it sank, but all other parts were salvaged for use in the reconstructed dredge. It worked its way downstream on one side of the valley, then back up the other side, until being decommissioned on 1 November 1959.

The immediate success of the dredge resulted in the Canadian Klondyke Mining Company ordering the construction of two more dredges the following year.

Operation

The electrically powered machine required 920hp while digging, and more when moving its gangplank. With its installed hydraulic monitors, the eight-storey dredge would cut into gravel banks, washing down the released material for processing. The machine created a dredge pond by virtue of its operation, its size dependent on the valley in which it was operating, but sometimes reaching 150mby90mm (490feetby300feetm). It would rotate on two spuds, each 56inchesby36inchesin (byin) and 60feet long.

The 107feet digging ladder enabled the dredge to dig a cut with an average arc of about 275feet. This wide arc was possible because of the use of two spuds. It could reach 17feet above water level and 48feet below it, with each of the 72 buckets capable of moving loads up to 16cuft. Each bucket weighed 1515kg (3,340lb), each flange 347kg (765lb), and each securing pin 225kg (496lb).

Gold was recovered in a rotating 49.5feet long trommel screen with 9.75feet diameter and 12.5% grade. A pipe was suspended within the trommel, carrying water upwards to spray the incoming material, cleaning it and breaking up larger lumps. Finer material (gold, sand, and pebbles) was sieved through 0.75inches holes in the screen, which rotated at 7.8 revolutions per minute, into a distributor box. From there, it flowed into sluice tables, long troughs with an area of 1705square feet which had a constant flow of water. About 75% of the gold was caught in a 4feet coconut matting and steel riffles at the bottom of the troughs. A smaller distributor captured another 20% of the gold, and all remaining material was washed out into the dredge pond. The larger pieces of gravel were ejected from a 32inches wide stacker at its rear, a 131feet belt moving at 356ft/min. These tailings remain as a "vast, rippled blight on the landscape". Particles of gold and nuggets too large to fit through the screen holes would be ejected with the gravel.

In its 46 years of operations, the machine mined nine tons of gold, dredging 22 buckets of gravel every minute, about 18000cuyd per day. Dredge No. 4 had a much greater capacity than other dredges that were operating in the area, and could sometimes operate through winter. In 1918, it began operating on 1 May, and continued until 3 April 1919, at which time it was stopped for repairs.

It worked without interruption from late April or early May until late November every year. At the end of each season, the buckets were removed. More than twenty dredges operated throughout the same area, with the first built in 1899.

Crew

The crew who operated the dredge consisted of various positions. The dredge master was responsible for ensuring the productivity of the dredge, and would also serve as winter watchman. Among the position's activities were documenting crew hours and breakdowns, and preparing a dredging plan for the area to be excavated. The winchman operated the dredge from the master control room, taking over for the dredge master on the evening and night shifts. Among the winchman's tasks were supervising the crew and operating the digging ladder. An oiler lubricated and maintained all moving parts, including pumps, motors, tumblers, and the main drive, and replaced worn parts, also substituting for the winchman at times.

The bow decker was responsible for the bucket line, cleaning clay away from the lip of each bucket as it passed along the digging ladder, inspected buckets and pins for damage, cracked large rocks in the buckets with a sledgehammer, removed root and log debris from the buckets, and cleaned the deck. A stern decker was responsible for the stacker, ensuring it did not interfere with the power lines, that it remained clear of the tailings, and that any debris that jammed the conveyor belt was cleared. Large dredges, such as Dredge No. 4, also employed a panner, who obtained samples of material from the bucket line to inspect its colour.

The lowest-ranking group was known as the "bull gang", three to five members who were responsible for the machine's cables, the incoming power lines, and the "deadmen". The latter were two bulldozers along the shore of the dredge pond, attached to the dredge by steel cables, and were used as anchors.

National Historic Site

The dredge lay dormant where it was decommissioned from 1959. In the spring of 1960, a dam collapse flooded the creek in which it lay, rotating it 180° and lifting it off the shelf on which it was resting. It was purchased by Parks Canada in 1970 for $1, to become part of its proposed commemoration program for the Klondike goldfields. It was not until 1991 that it was excavated, and in 1992 it was moved to its current site, where it is protected from seasonal flooding.

On 22 September 1997, Dredge No. 4 was designated a National Historic Site of Canada because of its association with Klondike gold mining and as symbolic of the evolution of gold mining from a labour-intensive activity to a mechanical process. It is one of five National Historic Sites in the Dawson City area, the others being the and the Dawson Historical Complex., Discovery Claim National Historic Site and the Former Territorial Courthouse. In 2012, Parks Canada reduced its budget, eliminating 600 jobs and stating that historic sites with low visitation would be accessible only on self-guided tours instead of being led by a guide. Among them was Dredge No. 4. Today, a private company provides guided tours of the dredge.

References

Further reading

External links

63.9436°N -139.3356°W