The Dewoitine D.30 first appeared in public at the Paris Aero Show in December 1930. It was a single-engine, ten-seat passenger aircraft with a high cantilever wing and rectangular-section fuselage. It had a fabric-covered metal frame and was powered by a 485 kW (650 hp) Hispano-Suiza 12Nbr water cooled, upright V-12 engine. This engine was closely cowled, the cowling following the profile of the two cylinder banks, and drove a two-blade propeller; it was cooled with a Lamblin radiator mounted ventrally at its rear.
The empennage of the D.30 was conventional, with the strut-braced tailplane mounted on top of the fuselage. The rear control surfaces were unbalanced; the rudder reached down to the bottom of the fuselage, moving in a cutout between the elevators. The single main wheels of the undercarriage were mounted on pairs of V-form struts joined to the lower fuselage longerons, with near-vertical shock absorber legs attached to the wing. A tailskid completed the conventional landing gear.
The D.30 first flew on 21 May 1931. A second prototype followed but was modified into a trimotor aircraft, designated the Dewoitine D.31 and powered by three Hispano-Suiza 9Q nine-cylinder radial engines. The outer engines were each mounted well below the wing via two pairs of struts. Apart from the three engines and a consequent increase in weight and slight reduction in length, the D.31 was very similar to the D.30. It first flew on 12 January 1932, initially powered by the 172 kW (230 hp) 9Qa engine variant. In 1935 these were replaced by 240 kW (320 hp) 9Qbs. In this form the outer engines remained uncowled but the central one had a long chord NACA cowling.
The D.31 was owned by the Centre d'Essais de Matériels Aériens (CEMA) at Villacoublay. it remained registered there in June 1935 but had gone two years later, prompting speculation that it may have been used by Republican forces in the Spanish Civil War.