| Daewoo Precision Industries K1A | |
| Origin: | South Korea |
| Type: | Assault rifle Carbine |
| Is Ranged: | yes |
| Service: | 1981–present |
| Used By: | See Users |
| Wars: | Persian Gulf War War in Afghanistan[1] Iraq War |
| Designer: | Agency for Defense Development Daewoo Precision Industries |
| Design Date: | 1977–1982 |
| Manufacturer: | Arsenal of National Defense (1980–1981) Daewoo Precision Industries (1981–1999) Daewoo Telecom (1999–2002) Daewoo Precision (2002–2006) S&T Daewoo (2006–2012) S&T Motiv (2012–2021) SNT Motiv (2021–present) Dasan Machineries (2016–present) |
| Production Date: | 1980–present |
| Number: | 180,000[2] |
| Variants: | See Variants |
| Weight: | 2.87kg (06.33lb) (w/o magazine) |
| Length: | 838mm (stock extended) 653mm (stock retracted) |
| Part Length: | 263 mm (10.4in) |
| Cartridge: | .223 Remington (pre 2014 production) 5.56×45mm NATO (post 2014 production) |
| Caliber: | 5.56 mm |
| Action: | Gas-operated, rotating bolt (direct impingement) |
| Rate: | 750–900 rounds/min |
| Velocity: | 820m/s (KM193) 790m/s (K100) |
| Range: | 250 m (KM193) 400 m (K100) |
| Feed: | Various STANAG magazines. |
| Sights: | Iron sights |
The Daewoo Precision Industries K1/K1A is a South Korean selective-fire assault rifle developed by Agency for Defense Development (ADD) and manufactured by Daewoo Precision Industries (now SNT Motiv)[3] and Dasan Machineries (since 2016). It entered service in the Republic of Korea Armed Forces in 1981. Although the K1 uses .223 Remington, it is classified as a submachine gun by the South Korean military and the manufacturer,[4] because the K1 was intended to replace the M3 submachine gun.
In 1976, the ROKA Special Warfare Command requested a new weapon to replace the old M3 submachine gun. In the following year, ADD launched a project derived from the XB rifle, which started in 1972 to replace licensed M16A1s with indigenous weapons. Under the demands of the ROKASWC, the new submachine gun must acquire greater firepower, light weight, cost effectiveness, and easy access to spare parts. The first prototypes were made in 1980, and entered service in 1981 after series of field test.
But due to the design of its flash suppressor, the K1 exhibited serious problems in service with the ROK armed forces. The original version had excessive recoil, noise, flash, and weak stock due to increase in firepower. These problems caused difficulty in aiming especially during night operation.
These shortcomings were later fixed by the development and adoption of a new flash suppressor, which has three holes in the top right quadrant to limit muzzle flip under rapid fire and reduces flash to one-third of that of the early K1. This new version of K1 is known as the K1A and its production began in 1982. All K1 submachine guns in service were subsequently modified to the K1A standard.
The K1A is often mated with the PVS-4K rail integration system. It is seen as a potential candidate for the "Warrior Platform", a Korean next-generation infantry project.[5]
Since 2014, newly produced and repaired K1A received new barrel suited for firing 5.56×45mm NATO ammunition.
Most of the time, K1 submachine gun is regarded as a shortened or carbine version of Daewoo Precision Industries K2 assault rifle. However, although the two guns share development history they are very different from each other for the following reasons:
The carbine version of K2 named K2C was developed and shown to the public in 2012 by S&T Motiv.
Used by Special Forces Command (Cambodia)[8] 137 K1As sold.[9]
Seen in use by the Indonesian Air Force[10]
Standard-issued submachine gun of the ROK Armed Forces.[1] Will be partially replaced by the STC16/K13 carbine.[11]
Received 280 K1A rifles in 2003.[13]
855 K1As sold to Singapore from a SIPRI small arms report in 2019.[9]
The S&T Motiv K2C, an upgraded carbine version of the K2 rifle, was provided to the Republic of Korea Army Special Warfare Command for trial. After a series of tests, K2C was rejected. Instead, the ROK Armed Forces launched a competition for replacing K1A with new rifle.
On 13 June 2020, the ROKASWC announced that the DSAR15PC had been selected as its new service carbine to replace the K1A carbine. The DSAR15P is based on the CAR 816 and other AR-15 platforms, with the carbine version having an barrel and weighing . 1,000 carbines were initially to be delivered to gather user feedback, with 15,000 to be delivered by 2023.[14] [15] However, on 14 July 2021 it was announced that due to leaking of military secrets by a company executive, the DSAR15PC acquisition had been cancelled.[16]
In October 2023, SNT Motiv (formerly Daewoo Precision Industries) announced that the STC16 had been selected for the Special Operations Submachinegun Type II program to deliver 1,710 carbines to partially replace the K1A, and been designated the K13. The K13 is a 5.56×45mm short-stroke gas-piston driven carbine weighing 3 kg with a 292 mm free-floating barrel. Both the STC16 and DSAP-15 will compete in the reinitiated Type I program to deliver another 16,000 carbines to fully replace the K1A.[11] [17] [18]
Deployment of the K13 began in February 2024, but it encountered issues with cartridge explosions during firing.[19]
Cambodia
Indonesia
Papua New Guinea
Senegal
Singapore