DSER 20 explained

DSER 20, 34 & 35
Powertype:Steam
Designer:Cronin
Builddate:1911 & 1924
Totalproduction:3
Rebuilder:Inchicore railway works
Rebuilddate:1932–1951
Whytetype:4-4-2T
Leadingdiameter:3feet
Driverdiameter:6feet
Trailingdiameter:3feet
Axleload:15.75LT
Locoweight:61.5LT
Watercap:1700impgal
Boilerpressure:1602NaN2
Cylindercount:2
Cylindersize:18x
Tractiveeffort:15920lbf
Operatorclass:C2 (Inchicore)
Powerclass:K/HT
Numinclass:3
Locale:Ireland
Withdrawndate:1955-1959
Disposition:All scrapped
Notes:No. 20 as built

The DSER 20 class was a class of three 4-4-2T locomotives operated by the Dublin and South Eastern Railway and later the Great Southern Railways and CIÉ.

History

Designed by Cronin for the Dublin and South Eastern Railway, they were intended for express passenger work. No. 20 King George was the last locomotive to be built at Grand Canal Street railway works though the boiler was made by Kitson & Company. The remaining locomotives, numbered 34 and 35, were built by Beyer, Peacock & Company in 1924.

It is suggested the design might have arisen as an attempt to emulate the success of the LB&SCR I3 class, however on introduction engine No. 20 seemed to have issues with high axle loading restricting the route and it also appeared to have difficulties with heavier trains, steep gradients and hot axleboxes. The relatively large driver wheel diameter of 6inchesft1inchesin (ftin) may not have helped especially as it ended up being used on suburban services, only averaging a mere 90miles a day. It may have been hoped the Belpaire boilers, increased weight and other changes on those ordered from Beyer, Peacock & Company in 1924 may have helped.

Upon merger of the DSER with the Great Southern Railways in 1925, they were allocated the numbers 455 though 457 and Inchicore class C2. Rebuilds in the 1930s seem to have resolved most of the issues and a 1948 CIÉ report commented: "DSER heavy passenger engines. (When) (sic.) well maintained not all that bad. Essential to local service".