DMS-59 explained

DMS-59 (Dual Monitor Solution, 59 pins) was generally used for computer video cards. It provides two Digital Visual Interface (DVI) or Video Graphics Array (VGA) outputs in a single connector. A Y-style breakout cable is needed for the transition from the DMS-59 output (digital + analogue) to DVI (digital) or VGA (analogue), and different types of adapter cables exist. The connector is four pins high and 15 pins wide, with a single pin missing from the bottom row, in a D-shaped shell, with thumbscrews., this adapter cable was listed as obsolete by its primary vendor Molex.[1]

The advantage of DMS-59 is its ability to support two high resolution displays, such as two DVI Single Link digital channels or two VGA analog channels, with a single DVI-size connector. The compact size lets a low-profile card support two high resolution displays, and a full-height card (with two DMS-59 connectors) up to four high resolution displays.

The DMS-59 connector was used by e.g. AMD (AMD FireMV), Nvidia and Matrox for video cards sold in some Lenovo ThinkStation models, Viglen Genies and Omninos, Dell, HP and Compaq computers. DMS-59 connectors also appeared on Sun Computers. Some confusion has been caused by the fact that vendors label cards with DMS-59 as "supports DVI", but the cards have no DVI connectors built-in. Such cards, when equipped with only a VGA connector adapter cable, cannot be connected to a monitor with only a DVI-D input. A DMS-59 to DVI adapter cable needs to be used with such monitors.

The DMS-59 connector is derived from the LFH-60 Molex low-force helix connector, which could be found in some earlier graphics cards. These ports are similar to DMS-59, but have all 60 pins present, whereas DMS-59 has one pin (pin 58) blocked. A connector plug with all 60 pins (such as a Molex 88766-7610 DVI-I splitter) does not fit into a properly keyed DMS-59 socket.

A Dual-DVI breakout cable can be used in connection with two passive DVI-to-HDMI adapters to feed modern displays with HDMI inputs, while using a DMS-59 graphics card, since the DVI signals are electrically identical to HDMI signals and do not require any kind of conversion.

References

General

External links

Notes and References

  1. tagged as Obsolete Web site: 1.27mm Pitch DMS-59 -to-DVI-I(F)+VGA(F) Adapter Cable Assembly. www.molex.com. 2020-12-26.