In graph theory, the crossing number of a graph is the lowest number of edge crossings of a plane drawing of the graph . For instance, a graph is planar if and only if its crossing number is zero. Determining the crossing number continues to be of great importance in graph drawing, as user studies have shown that drawing graphs with few crossings makes it easier for people to understand the drawing.
The study of crossing numbers originated in Turán's brick factory problem, in which Pál Turán asked for a factory plan that minimized the number of crossings between tracks connecting brick kilns to storage sites. Mathematically, this problem can be formalized as asking for the crossing number of a complete bipartite graph. The same problem arose independently in sociology at approximately the same time, in connection with the construction of sociograms. Turán's conjectured formula for the crossing numbers of complete bipartite graphs remains unproven, as does an analogous formula for the complete graphs.
The crossing number inequality states that, for graphs where the number of edges is sufficiently larger than the number of vertices, the crossing number is at least proportional to . It has applications in VLSI design and incidence geometry.
Without further qualification, the crossing number allows drawings in which the edges may be represented by arbitrary curves. A variation of this concept, the rectilinear crossing number, requires all edges to be straight line segments, and may differ from the crossing number. In particular, the rectilinear crossing number of a complete graph is essentially the same as the minimum number of convex quadrilaterals determined by a set of points in general position. The problem of determining this number is closely related to the happy ending problem.
For the purposes of defining the crossing number, a drawing of an undirected graph is a mapping from the vertices of the graph to disjoint points in the plane, and from the edges of the graph to curves connecting their two endpoints. No vertex should be mapped onto an edge that it is not an endpoint of, and whenever two edges have curves that intersect (other than at a shared endpoint) their intersections should form a finite set of proper crossings, where the two curves are transverse. A crossing is counted separately for each of these crossing points, for each pair of edges that cross. The crossing number of a graph is then the minimum, over all such drawings, of the number of crossings in a drawing.
Some authors add more constraints to the definition of a drawing, for instance that each pair of edges have at most one intersection point (a shared endpoint or crossing). For the crossing number as defined above, these constraints make no difference, because a crossing-minimal drawing cannot have edges with multiple intersection points. If two edges with a shared endpoint cross, the drawing can be changed locally at the crossing point, leaving the rest of the drawing unchanged, to produce a different drawing with one fewer crossing. And similarly, if two edges cross two or more times, the drawing can be changed locally at two crossing points to make a different drawing with two fewer crossings. However, these constraints are relevant for variant definitions of the crossing number that, for instance, count only the numbers of pairs of edges that cross rather than the number of crossings.
As of April 2015, crossing numbers are known for very few graph families. In particular, except for a few initial cases, the crossing number of complete graphs, bipartite complete graphs, and products of cycles all remain unknown, although there has been some progress on lower bounds.
See main article: Turán's brick factory problem. During World War II, Hungarian mathematician Pál Turán was forced to work in a brick factory, pushing wagon loads of bricks from kilns to storage sites. The factory had tracks from each kiln to each storage site, and the wagons were harder to push at the points where tracks crossed each other, from which Turán was led to ask his brick factory problem: how can the kilns, storage sites, and tracks be arranged to minimize the total number of crossings? Mathematically, the kilns and storage sites can be formalized as the vertices of a complete bipartite graph, with the tracks as its edges. A factory layout can be represented as a drawing of this graph, so the problem becomes:what is the minimum possible number of crossings in a drawing of a complete bipartite graph?
Kazimierz Zarankiewicz attempted to solve Turán's brick factory problem; his proof contained an error, but he established a valid upper bound of
rm{cr}(Km,n)\le\left\lfloor
| n | \right\rfloor\left\lfloor | |
| 2 |
| n-1 | \right\rfloor\left\lfloor | |
| 2 |
| m | \right\rfloor\left\lfloor | |
| 2 |
| m-1 | |
| 2 |
\right\rfloor
for the crossing number of the complete bipartite graph . This bound has been conjectured to be the optimal number of crossings for all complete bipartite graphs.
The problem of determining the crossing number of the complete graph was first posed by Anthony Hill, and appeared in print in 1960. Hill and his collaborator John Ernest were two constructionist artists fascinated by mathematics. They not only formulated this problem but also originated a conjectural formula for this crossing number, which Richard K. Guy published in 1960. Namely, it is known that there always exists a drawing with
rm{cr}(Kp)\le
| 1 | \left\lfloor | |
| 4 |
| p | \right\rfloor\left\lfloor | |
| 2 |
| p-1 | \right\rfloor\left\lfloor | |
| 2 |
| p-2 | \right\rfloor\left\lfloor | |
| 2 |
| p-3 | |
| 2 |
\right\rfloor
Saaty further verified that this formula gives the optimal number of crossings for and Pan and Richter showed that it also is optimal for .
The Albertson conjecture, formulated by Michael O. Albertson in 2007, states that, among all graphs with chromatic number, the complete graph has the minimum number of crossings. That is, if the conjectured formula for the crossing number of the complete graph is correct, then every -chromatic graph has crossing number at least equal to the same formula. The Albertson conjecture is now known to hold for .
The smallest cubic graphs with crossing numbers 1–8 and 11 are known . The smallest 1-crossing cubic graph is the complete bipartite graph, with 6 vertices. The smallest 2-crossing cubic graph is the Petersen graph, with 10 vertices. The smallest 3-crossing cubic graph is the Heawood graph, with 14 vertices. The smallest 4-crossing cubic graph is the Möbius-Kantor graph, with 16 vertices. The smallest 5-crossing cubic graph is the Pappus graph, with 18 vertices. The smallest 6-crossing cubic graph is the Desargues graph, with 20 vertices. None of the four 7-crossing cubic graphs, with 22 vertices, are well known. The smallest 8-crossing cubic graphs include the Nauru graph and the McGee graph or (3,7)-cage graph, with 24 vertices. The smallest 11-crossing cubic graphs include the Coxeter graph with 28 vertices.
In 2009, Pegg and Exoo conjectured that the smallest cubic graph with crossing number 13 is the Tutte–Coxeter graph and the smallest cubic graph with crossing number 170 is the Tutte 12-cage.
The 2/3-bisection width
b(G)
G
2n/3
b(G)
cr(G)+n=\Omega(b2(G))
G
cr(G)
b(G)
cr(G)
In general, determining the crossing number of a graph is hard; Garey and Johnson showed in 1983 that it is an NP-hard problem. In fact the problem remains NP-hard even when restricted to cubic graphs and to near-planar graphs (graphs that become planar after removal of a single edge). A closely related problem, determining the rectilinear crossing number, is complete for the existential theory of the reals.
On the positive side, there are efficient algorithms for determining whether the crossing number is less than a fixed constant . In other words, the problem is fixed-parameter tractable. It remains difficult for larger, such as . There are also efficient approximation algorithms for approximating
cr(G)+n
See main article: Crossing number inequality. For an undirected simple graph with vertices and edges such that the crossing number is always at least
\operatorname{cr}(G)\geq
| e3 | |
| 29n2 |
.
This relation between edges, vertices, and the crossing number was discovered independently by Ajtai, Chvátal, Newborn, and Szemerédi, and by Leighton . It is known as the crossing number inequality or crossing lemma.
The constant is the best known to date, and is due to Ackerman. The constant can be lowered to, but at the expense of replacing with the worse constant of .
The motivation of Leighton in studying crossing numbers was for applications to VLSI design in theoretical computer science. Later, Székely also realized that this inequality yielded very simple proofs of some important theorems in incidence geometry, such as Beck's theorem and the Szemerédi-Trotter theorem, and Tamal Dey used it to prove upper bounds on geometric k-sets.
If edges are required to be drawn as straight line segments, rather than arbitrary curves, then some graphs need more crossings. The rectilinear crossing number is defined to be the minimum number of crossings of a drawing of this type. It is always at least as large as the crossing number, and is larger for some graphs. It is known that, in general, the rectilinear crossing number can not be bounded by a function of the crossing number.[1] The rectilinear crossing numbers for through are, and values up to are known, with requiring either 7233 or 7234 crossings. Further values are collected by the Rectilinear Crossing Number project.
A graph has local crossing number if it can be drawn with at most crossings per edge, but not fewer.The graphs that can be drawn with at most crossings per edge are also called -planar.
Other variants of the crossing number include the pairwise crossing number (the minimum number of pairs of edges that cross in any drawing) and the odd crossing number (the number of pairs of edges that cross an odd number of times in any drawing). The odd crossing number is at most equal to the pairwise crossing number, which is at most equal to the crossing number. However, by the Hanani–Tutte theorem, whenever one of these numbers is zero, they all are. surveys many such variants.