The Courtois-Suffit Lescop CSL C1 was a prototype French biplane fighter built in the final months of World War I by the French: Société Anonyme d'Application Industrial du Bois (S.A.I.B.). It was among the first aircraft to be fitted with leading-edge flaps on the lower wing. It was not put into production.
Roger Courtois-Suffit and French: [[Captain (armed forces)|Capitaine]] Pierre Lescop designed the CSL-1 to satisfy a French Military Aviation (French: [[Aviation Militaire]]) requirement for a single-seat fighter issued in 1917 for service the following year. It was designed to use the nine-cylinder 160hp Gnome Monosoupape 9Nc rotary engine, but a 140hp Clerget 9Bf rotary had to be used instead when the 9Nc was unavailable. A subsequent model was intended to use the 11-cylinder 200hp Clerget 11E rotary whenever it became available.[1] [2]
The CSL-1 was a single-bay biplane with a fabric-covered wooden fuselage with its engine covered by a full metal cowling. The two-spar wings were of the same construction and were connected with single streamlined I-shaped interplane struts. Inverted V-shaped cabane struts connected the upper wing to the fuselage in front of the cockpit. The ailerons were located at the outer ends of the lower wing and were operated by torque tubes. The lower wing was also fitted with 1.3adj=midNaNadj=mid plywood leading-edge flaps at its ends that were 0.18m (00.59feet) deep. The flaps were hinged to the forward wing spar and covered with fabric. The leading edge of the horizontal stabiliser was also equipped with a full-width flap that measured 0.15m (00.49feet) in depth. S.A.I.B. had built British Sopwith 1½ Strutter bombers under license and the CSL-1 used a variant of that aircraft's conventional landing gear with each wheel on a half-axle connected by a spreader bar.[1] [3]
Construction of the prototype began in October 1917 at S.A.I.B.'s Paris factory and the aircraft made its first flight in January 1918.[4] The CSL-1 was noted as undergoing testing on 1 May 1918, but nothing is known of its performance or how well its leading-edge flaps performed. The aircraft was not selected for production along with all the other aircraft designed to use the Monosoupape 9Nc engine.