Compartmental neuron models explained

Compartmental modelling of dendrites deals with multi-compartment modelling of the dendrites, to make the understanding of the electrical behavior of complex dendrites easier. Basically, compartmental modelling of dendrites is a very helpful tool to develop new biological neuron models. Dendrites are very important because they occupy the most membrane area in many of the neurons and give the neuron an ability to connect to thousands of other cells. Originally the dendrites were thought to have constant conductance and current but now it has been understood that they may have active Voltage-gated ion channels, which influences the firing properties of the neuron and also the response of neuron to synaptic inputs.[1] Many mathematical models have been developed to understand the electric behavior of the dendrites. Dendrites tend to be very branchy and complex, so the compartmental approach to understand the electrical behavior of the dendrites makes it very useful.[2]

Introduction

Multiple compartments

Consider a two-compartmental model with the compartments viewed as isopotential cylinders with radius

ai

and length

Li

.

Vi

is the membrane potential of ith compartment.

ci

is the specific membrane capacitance.

rMi

is the specific membrane resistivity.

The total electrode current, assuming that the compartment has it, is given by

i
I
electrode
.

The longitudinal resistance is given by

rL

.

Now according to the balance that should exist for each compartment, we can say

i
i
cap

+

i
i
ion

=

i
i
long

+

i
i
electrode
.....eq(1)

where

i
i
cap
and
i
i
ion
are the capacitive and ionic currents per unit area of ith compartment membrane. i.e. they can be given by
i
i
cap

=ci

dVi
dt
and
i
i
ion

=

Vi
rMi
.....eq(2)

If we assume the resting potential is 0. Then to compute

i
i
long
, we need total axial resistance. As the compartments are simply cylinders we can say

Rlong=

rLL1
2\pi
2
a
1

+

rLL2
2\pi
2
a
2
.....eq(3)

Using ohms law we can express current from ith to jth compartment as

1
i
long

=g1,2(V2-V1)

and
2
i
long

=g2,1(V1-V2)

.....eq(4)

The coupling terms

g1,2

and

g2,1

are obtained by inverting eq(3) and dividing by surface area of interest.

So we get

g1,2=

a
2
2
1a
r1(a
2L
1+a
2L
2)
LL

and

g2,1=

a
2
1
2a
r1(a
2L
2+a
2L
1)
LL

Finally,

I
i
electrode

=

i
I
electrode
Ai

Ai=2\piaiLi

is the surface area of the compartment i.

If we put all these together we get

c1

dV1
dt

+

V1
rM1

=g1,2(V2-V1)+

1
I
electrode
A1

c2

dV2
dt

+

V2
rM2

=g2,1(V1-V2)+

2
I
electrode
A2
.....eq(5)

If we use

r1=1/g1,2

and

r2=1/g2,1

then eq(5) will become

c1

dV1
dt

+

V1
rM1

=

V2-V1
r1

+

1
I
electrode
A1

c2

dV2
dt

+

V2
rM2

=

V1-V2
r2

+

2
I
electrode
A2
.....eq(6)

Now if we inject current in cell 1 only and each cylinder is identical then

r1=r2\equivr

Without loss in generality we can define

rM=rM1=rM2

After some algebra we can show that

V1
i1

=

rM(r+rM)
r+2rM

also

Rinput,coupled
Rinput,uncoupled

=1-

rM
r+2rM

i.e. the input resistance decreases. For increment in the potential, coupled system current should be greater than that is required for uncoupled system. This is because the second compartment drains some current.

Now, we can get a general compartmental model for a treelike structure and the equations are

Cj

dVj
dt

=-

Vj
Rj

+\sumk{}

Vk-Vj
Rjk

+Ij

Increased computational accuracy in multi-compartmental cable models

Each dendritic section is subdivided into segments, which are typically seen as uniform circular cylinders or tapered circular cylinders. In the traditional compartmental model, point process location is determined only to an accuracy of half segment length. This will make the model solution particularly sensitive to segment boundaries. The accuracy of the traditional approach for this reason is O(1/n) when a point current and synaptic input is present. Usually the trans-membrane current where the membrane potential is known is represented in the model at points, or nodes and is assumed to be at the center. The new approach partitions the effect of the input by distributing it to the boundaries of the segment. Hence any input is partitioned between the nodes at the proximal and distal boundaries of the segment. Therefore, this procedure makes sure that the solution obtained is not sensitive to small changes in location of these boundaries because it affects how the input is partitioned between the nodes. When these compartments are connected with continuous potentials and conservation of current at segment boundaries then a new compartmental model of a new mathematical form is obtained. This new approach also provides a model identical to the traditional model but an order more accurate. This model increases the accuracy and precision by an order of magnitude than that is achieved by point process input.

Cable theory

See main article: Cable theory. Dendrites and axons are considered to be continuous (cable-like), rather than series of compartments.

Some applications

Information processing

Midbrain dopaminergic neuron

Mode locking

Compartmental neural simulations with spatial adaptivity

Action potential (AP) initiation site

A finite-state automaton model

Constraining compartmental models

Multi-compartmental model of a CA1 pyramidal cell

Electrical compartmentalization

Robust coding in motion-sensitive neurons

Conductance-based neuron models

See also

References

  1. Book: Ermentrout, Bard. Mathematical Foundations of Neuroscience. limited. 2010. Springer. 978-0-387-87707-5. 29–45. Terman H. David.
  2. Lindsay, A. E., Lindsay, K. A., & Rosenberg, J. R. (2005). Increased computational accuracy in multi-compartmental cable models by a novel approach for precise point process localization. Journal of Computational Neuroscience, 19(1), 21–38.
  3. Poirazi, P. (2009). Information Processing in Single Cells and Small Networks: Insights from Compartmental Models. In G. Maroulis & T. E. Simos (Eds.), Computational Methods in Science and Engineering, Vol 1 (Vol. 1108, pp. 158–167).
  4. Kuznetsova, A. Y., Huertas, M. A., Kuznetsov, A. S., Paladini, C. A., & Canavier, C. C. (2010). Regulation of firing frequency in a computational model of a midbrain dopaminergic neuron. Journal of Computational Neuroscience, 28(3), 389–403.
  5. Svensson, C. M., & Coombes, S. (2009). MODE LOCKING IN A SPATIALLY EXTENDED NEURON MODEL: ACTIVE SOMA AND COMPARTMENTAL TREE. International Journal of Bifurcation and Chaos, 19(8), 2597–2607.
  6. Rempe, M. J., Spruston, N., Kath, W. L., & Chopp, D. L. (2008). Compartmental neural simulations with spatial adaptivity. Journal of Computational Neuroscience, 25(3), 465–480.
  7. Ibarz, J. M., & Herreras, O. (2003). A study of the action potential initiation site along the axosomatodendritic axis of neurons using compartmental models. In J. Mira & J. R. Alvarez (Eds.), Computational Methods in Neural Modeling, Pt 1 (Vol. 2686, pp. 9–15).
  8. Schilstra, M., Rust, A., Adams, R., & Bolouri, H. (2002). A finite state automaton model for multi-neuron simulations. Neurocomputing, 44, 1141–1148.
  9. Gold, C., Henze, D. A., & Koch, C. (2007). Using extracellular action potential recordings to constrain compartmental models. Journal of Computational Neuroscience, 23(1), 39–58.
  10. Keren, N., Peled, N., & Korngreen, A. (2005). Constraining compartmental models using multiple voltage recordings and genetic algorithms. Journal of Neurophysiology, 94(6), 3730–3742.
  11. Markaki, M., Orphanoudakis, S., & Poirazi, P. (2005). Modelling reduced excitability in aged CA1 neurons as a calcium-dependent process. Neurocomputing, 65, 305–314.
  12. Grunditz, A., Holbro, N., Tian, L., Zuo, Y., & Oertner, T. G. (2008). Spine Neck Plasticity Controls Postsynaptic Calcium Signals through Electrical Compartmentalization. Journal of Neuroscience, 28(50), 13457–13466.
  13. Elyada, Y. M., Haag, J., & Borst, A. (2009). Different receptive fields in axons and dendrites underlie robust coding in motion-sensitive neurons. Nature Neuroscience, 12(3), 327–332.
  14. Hendrickson, E. B., Edgerton, J. R., & Jaeger, D. (2011). The capabilities and limitations of conductance-based compartmental neuron models with reduced branched or unbranched morphologies and active dendrites. Journal of Computational Neuroscience, 30(2), 301–321.

External links