Comet (1813 steamboat) explained

The steamboat Comet was the second steamboat to navigate the Ohio and Mississippi rivers.[1] Comets owner was Daniel D. Smith and she was launched in 1813 at Pittsburgh, Pennsylvania.[2] [3] With an engine and power train designed and built by Daniel French, the Comet was the first of the Western steamboats to be powered by a horizontal high-pressure engine with its piston rod connected to a stern paddle wheel.[4] [5] Smith was the first to defy the steamboat monopoly in Orleans Territory granted to Robert R. Livingston and Robert Fulton.

Pittsburgh

Daniel French built Comet steam engine and drive train at Brownsville, Pennsylvania, and installed them in the steamboat at Pittsburgh prior to July 13, 1813, her first voyage.[6] [7] The Pittsburgh Gazette announced that Comet had departed Pittsburgh for Louisville, Kentucky, on July 13:

On September 7, 1813, Robert Fulton wrote to John Livingston at Pittsburgh requesting specific information about the Comet.[8] In October 1813 a public notice was published in The Pittsburgh Gazette:

On November 11, 1813, Fulton wrote to Livingston at Pittsburgh:

No trial date was entered in the docket book at the Allegheny County Courthouse. Apparently, the threatened lawsuit was not pursued.[9]

New Orleans

After steaming from Pittsburgh to the port of New Orleans, the Comet was entered for the first time in the New Orleans Wharf Register on February 25, 1814.[10] Payment of the wharfage fee, in the amount of "$6", for the "Steam Boat, Capt. Lake" was recorded.[10] Subsequent entries in the New Orleans Wharf Register, on March 15, April 7, May 2 and July 3, 1814, identified the Comet as "Steam Boat (Lake)", with a wharfage fee of $6.[10]

References

Notes and References

  1. Lloyd (1856), p. 42:
    "The second steamboat of the West was a diminutive vessel called the Comet. She was rated at twenty-five tons. Daniel D. Smith was the owner, and D. French the builder of this boat. Her machinery was on a plan for which French had obtained a patent in 1809. She went to Louisville in the summer of 1813, and descended to New Orleans in the spring of 1814. She afterwards made two voyages to Natchez, and was then sold, taken to pieces, and the engine was put up in a cotton factory."
  2. Morrison, p. 202-3:
    "In 1813, Daniel French, of Pittsburg, Pa., altered a river barge, giving her more freeboard by building up her sides, into which he placed an engine constructed by himself. This vessel was about twenty-five tons burden, called the 'Comet,' and was owned by Daniel D. Smith. She went as far as Louisville in the summer of the same year, and during the next year went to New Orleans. She made a few voyages between the latter city and Natchez, after which she was sold, her engine taken out and put up in a cotton mill, and her hull broken up."
  3. Miller, p. 69:
    "In the summer of 1813, Daniel D. Smith altered a river barge at Pittsburgh, using an engine invented by Daniel French. The craft, called the Comet, was sent down to New Orleans and also made a few trips to Natchez, but apparently was unsuccessful in the trade..."
  4. Daniel French granted US Patent (October 9, 1809), Propulsion of Vessels, 1791–1810, US Patent Office Scientific
  5. Hunter (1993), p. 127:
    "The first departure from the Boulton and Watt type of engine was the French oscillating cylinder engine with which the first three steamboats built by the Brownsville group were equipped- the Comet (25 tons, 1813), the Despatch (25 tons, 1814), and the Enterprise (75 tons, 1814). The first of these was not a success, and the Despatch made no name for herself; but the Enterprise was one of the best of the early western steamboats."
  6. Congressional Edition, Volume 2552 (1889), p. 188:
    "In the mean while, however, several other steam-boats had been built. The Comet was constructed at Pittsburgh in 1813, 52 feet long and 8 feet beam, with 50 to 60 pounds of steam per inch, and 20 to 30 strokes a minute."
  7. Congressional Edition, Volume 2552 (1889), p. 193:
    "The first high-pressure engine was built in 1813, by French, at Brownsville, Pa., and was placed on the Comet. It was an oscillating engine, but not working well, was taken out and placed in saw-mill at Natchez in 1814."
  8. Kunz, p. 29:
    "142 Autograph letter from Robert Fulton to John Livingston, dated New York, September 7th, 1813, with inquiries as to the build, capacity and services of the Comet and instructions regarding vouchers for expenditures for the New Orleans boats, etc.
    Loaned from the Estate of Cornelia Livingston Crary."
  9. Prothonotary, County of Allegheny, First Floor City County Building, 414 Grant St., Pittsburgh, PA 15219-2469, Old Docket Book
  10. New Orleans Wharf Register