| Road Name: | Cleveland–Redland Bay Road |
| State: | qld |
| Type: | road |
| Length: | 15.2 |
| Route: | (Cleveland – Redland Bay) |
| Direction A: | North |
| End A: | Capalaba–Cleveland Road (Shore Street West), Cleveland |
| Exits: |
|
| Direction B: | South |
Cleveland–Redland Bay Road is a continuous 15.2km (09.4miles) road route in the Redland local government area of Queensland, Australia. The route is designated as part of State Route 47.It is a state-controlled district road (number 109) rated as a local road of regional significance (LRRS).[1] [2]
Cleveland–Redland Bay Road commences at an intersection with Capalaba–Cleveland Road (Shore Street West) in as State Route 47. It runs south as Waterloo Street, crossing two roundabouts before turning east on Russell Street. It then turns south on Bloomfield Street. As it crosses South Street and enters the name changes to Cleveland–Redland Bay Road.
Continuing through Thornlands it turns south-east and passes the exit to Redland Bay Road (Boundary Road) as it approaches the southern boundary (Eprapah Creek). Soon after entering it passes the exit to Colburn Avenue. From there the road continues south and south-east into, where it again turns south before turning south-east to its end at an intersection with Beenleigh-Redland Bay Road (Serpentine Creek Road).
Land use along the road is mainly residential, with a small area of rural on the western side in Redland Bay.
The road is fully sealed, with several short sections of four-lane dual carriageway. A project to upgrade sections of the road, at a cost of $110 million, was in construction in late 2021.[3]
Cleveland was surveyed in 1840, and was recommended for development as a port in 1841. In 1847 a navigation beacon was installed and a new town was planned. In 1850 Cleveland was proclaimed a township, but in 1852 it lost any chance of becoming a major port, although the navigation beacon was replaced by a lighthouse in 1864.[4] The town became the commercial centre for the surrounding area, with timber cutting and farming being the main industries.
Thornlands was originally part of Cleveland. It was made available for settlement by small farmers from 1858.[5]
The Redland Bay region was settled from the 1860s, first by timber cutters and then by farmers. Cotton was the first crop, but was unsuccessful and soon replaced by sugar cane.[6] The first roads from north to south were made by timber cutters to enable transport of their product to market.
This road intersects with the following state-controlled roads:
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 22 |
| Capalaba–Cleveland Road | |
| Location: | Cleveland Sub-Arterial Road (Old Cleveland Road), Capalaba to Cleveland–Redland Bay Road (Waterloo Street), Cleveland |
| Length Km: | 7.5 |
Capalaba–Cleveland Road is a state-controlled regional road (number 112), part of which is rated as a local road of regional significance (LRRS). It is signed as State Route 22.[1] [2] It runs from Cleveland Sub-Arterial Road (Old Cleveland Road) in to Cleveland–Redland Bay Road (Waterloo Street) in, a distance of 7.5km (04.7miles). It starts in Capalaba as part of Old Cleveland Road, then becomes Finucane Road to Cleveland, where it changes to Shore Street West. It intersects with Birkdale Road (Moreton Bay Road / Old Cleveland Road East) in Capalaba.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 21 |
| Redland Bay Road | |
| Location: | Redland Sub-Arterial Road (Mount Cotton Road), Burbank to Cleveland–Redland Bay Road, Thornlands |
| Length Km: | 11.9 |
Redland Bay Road is a state-controlled district road (number 110) rated as a local road of regional significance (LRRS).[1] [2] It is signed as State Route 21. It runs from Redland Sub-Arterial Road (Mount Cotton Road) in (where it crosses Tingalpa Creek) to Cleveland–Redland Bay Road in, a distance of 11.9km (07.4miles). It starts as part of Mount Cotton Road, then becomes Duncan Road, and finally Boundary Road. It intersects with Capalaba–Victoria Point Road (also known as Redland Bay Road – see note below) in .
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 21 |
| Colburn Avenue | |
| Location: | Cleveland–Redland Bay Road, Victoria Point to Thompson Street, Victoria Point |
| Length Km: | 2.7 |
Colburn Avenue is a state-controlled district road (number 1082) rated as a local road of regional significance (LRRS).[1] [2] It is signed as State Route 21. It runs from Cleveland–Redland Bay Road in to Thompson Street in Victoria Point, a distance of 2.7km (01.7miles). It has no major intersections.
The following state-controlled roads are associated with the intersecting roads described above:
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 54 |
| Birkdale Road | |
| Location: | Capalaba–Victoria Point Road, Capalaba to Main Road, Wellington Point |
| Length Km: | 6.8 |
Birkdale Road is a state-controlled road (number 1122), part regional and part district, with part rated as a local road of regional significance (LRRS).[1] [2] It is signed as State Route 54 for most of its length. It runs from Capalaba–Victoria Point Road (Redland Bay Road) in to Main Road in, a distance of 6.8km (04.2miles). It is known as Moreton Bay Road (part of SR22), Old Cleveland Road East (part of SR54), and Birkdale Road (part of SR54 and part of SR43). This road intersects with Brisbane–Redland Road (Moreton Bay Road) in Capalaba.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 22 |
| Brisbane–Redland Road | |
| Location: | Cleveland Sub-Arterial Road (Old Cleveland Road), Capalaba to Birkdale Road (Moreton Bay Road), Capalaba |
| Length Km: | 3.6 |
Brisbane–Redland Road is a state-controlled regional road (number 905).[1] [2] It is signed as State Route 22. It runs from Cleveland Sub-Arterial Road (Old Cleveland Road) in to Birkdale Road (Moreton Bay Road) in Capalaba, a distance of 3.6km (02.2miles). It is known as Moreton Bay Road, and serves as a bypass of the Capalaba CBD. It intersects with Capalaba–Victoria Point Road (Redland Bay Road) in Capalaba.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 44 |
| Capalaba–Victoria Point Road | |
| Location: | Brisbane–Redland Road (Moreton Bay Road), Capalaba to Redland Bay Road (Boundary Road), Alexandra Hills |
| Length Km: | 6.4 |
Capalaba–Victoria Point Road is a state-controlled district road (number 1102) rated as a local road of regional significance (LRRS).[1] [2] It is signed as State Route 44. It runs from the intersection of Brisbane–Redland Road (Moreton Bay Road) and Birkdale Road in to Redland Bay Road (Boundary Road) in, a distance of 6.4km (04miles). It is known as Redland Bay Road. It has no intersections with other state-controlled roads.
All distances are from Google Maps. The entire road is within the Redland local government area.