Nord Modular Explained

The Nord Modular series is a line of synthesizers produced by Clavia, a Swedish digital synthesizer manufacturer. The Nord Modular series, in common with their sister range the Nord Lead series, are analogue modelling synthesizers, producing sounds that approximate those produced by conventional analogue synths by using DSP chips to digitally model analogue circuitry.

Overview

The Nord Modular range approximates the much more flexible capabilities of modular synthesizers. Unlike most other analogue modeling synth hardware, which generally simulates one or a small number of (usually subtractive) synth circuit layouts, the Nord Modular provides an almost unlimited variation of synth architectures, with the facility to simulate, in addition to subtractive synthesis, additive, FM, and, in the second generation of the series, physical modelling synthesis methods, as well as a number of other sound generation and processing techniques.

Patch editorBecause of the flexibility offered by these synths, patches cannot be programmed from the control panel. Instead, patch editing is performed on a PC (connected via 2 dedicated MIDI ports in the case of the first generation and USB in the second generation or G2 systems), running editor software bundled with the synths.

The editor software is in appearance and function not dissimilar to computer-based modular synthesis environments like Reaktor which offer a graphical representation of the simulated modules and the associated connections between them. Unlike those systems however, the Nord Modulars are capable of functioning independently of a computer - the host computer plays no part in sound generation and is needed only to provide the patch editing interface.

ModulesThe Nord Modular line of synthesizers features a range of modules familiar to users of hardware modulars: audio input and output modules, Oscillators, Low Frequency Oscillators (or LFOs), envelope generators, filters of various kinds, mixers, audio effects such as distortion and chorus, logic gates and four sequencer modules,[1] which can be connected in almost any configuration- there is for example no restriction on connecting audio signal outputs to control signal or logic inputs (or vice versa), allowing for a great deal of flexibility in patch creation. Patches are only limited in complexity by the available DSP resources.
PolyphonyHowever, the more complex a patch is in general, the smaller the available polyphony is and, in practice, the specified full polyphony of the unit is only achievable when using a very small number of modules in a given patch. However, because of the flexible nature of the unit 'polyphony' does not correspond strictly to 'number of different notes sounding at one time'- indeed with some thought and careful programming it is possible to exceed the specified polyphony of the unit (by this definition of polyphony at least).

Nord Modular G2

Clavia introduced the first generation in 1998. The series was discontinued in 2004 upon the release of the next generation Nord Modular G2 series. The G2 is an updated and more powerful version of the original Modular (the G2 uses a new version of the Editor software as well), with greater polyphony and a large number of new modules to address the perceived limitations of the first generation, most notably a range of MIDI sequencing and output modules (the first generation's sequencing capabilities were limited to control of internal parameters, a restriction which many users felt to be the system's biggest limitation), time-based effects (reverb, delay, etc.), and physical modelling oscillators. However, there has been some debate in the NM community as to which generation produces the best raw sound, with many users feeling, for example, that the original series' filters had a more subjectively pleasing, grittier sound.The first G2 Modular serial number 001 was presented to Derek Sherinian by Bengt Lilja in 2004 to honor Sherinian for his high profile usage of Nord/Clavia products.

G2 series was discontinued in 2009.

The original Nord Modular (or 'Classic') series

(from the Clavia website)

The (first generation) Nord Modular family consists of three hardware models: Nord Modular Key, Nord Modular Rack and Nord Micro Modular.[2] They are all built around the same type of electronics and use the same type of DSP. Nord Modular Key and Rack have 4 DSPs as standard (can be expanded to 8 with the Nord Modular Voice Expansion Board), and the Nord Micro Modular has 1 DSP (non-expandable).

Nord Modular Key and Rack

General

MIDI features

Hardware

Dimensions (Nord Modular Key)

Dimensions (Nord Modular Rack)

Nord Micro Modular

General

MIDI features

Hardware

Dimensions

Used Nord Modulars can still be found for sale online.

The Nord Modular appears in the Nine Inch Nails video for Into The Void. Other known users are Autechre and Apparat.

Further reading

External links

Notes and References

  1. Web site: Clavia Nord Modular Virtual Analogue Modular Synthesizer, Part 2. Sound On Sound. May 1998. https://web.archive.org/web/20150608005258/http://www.soundonsound.com/sos/may98/articles/clavia.html. 8 June 2015.
  2. Web site: Clavia Nord Modular v3.03 & MicroModular. Sound On Sound. July 2000. https://web.archive.org/web/20111225152231/http://www.soundonsound.com/sos/jul00/articles/clavia.htm. 25 December 2011.
  3. Web site: Clavia Nord Modular. Sound On Sound. February 1998. https://web.archive.org/web/20150606105204/http://www.soundonsound.com/sos/feb98/articles/clavia.html. 6 June 2015.
  4. Web site: Clavia Nord Modular Virtual Analogue Modular Synthesizer, Part 1. Sound On Sound. April 1998. https://web.archive.org/web/20150609073010/http://www.soundonsound.com/sos/apr98/articles/nord_modular.html. 9 June 2015.