The aim of the Goeland was to provide a viable motor glider design based on wings taken from a Scheibe Spatz glider. The kit was supplied with two fuselage halves and the tail parts only, leaving it up to the builder to secure the Spatz wings and engine to finish the aircraft.
The finished aircraft is of mixed construction with a fibreglass fuselage and wood and doped aircraft fabric wings. The 13.21NaN1 span wings are mounted on a short pylon above the fuselage, although other sailplane wings can be employed in place of the Spatz wings. The specified König SC 430 180NaN0 radial engine is mounted in pusher configuration behind the wing and above the tail boom, although other similar engines can be used. The aircraft features tricycle landing gear and a cockpit bubble canopy.
In 1998 the basic kit was US$4400 and included just the fuselage halves and tail. A finished fuselage was US$8400 and plans were advertised at US$200. Building time was estimated at 300 hours.