| Chevrolet S-10 Electric | |
| Manufacturer: | General Motors |
| Production: | 1997–1998 |
| Assembly: | United States: Shreveport, Louisiana (Shreveport Operations) |
| Model Years: | 1997–1998 |
| Class: | Compact pickup truck |
| Body Style: | 2-door regular cab |
| Layout: | Front-motor, front-wheel drive |
| Platform: | GMT 325 |
| Wheelbase: | 108.30NaN0 |
| Height: | 62.40NaN0 |
| Motor: | 85kW AC induction motor |
| Transmission: | 1-speed fixed gear |
| Charging: | 6.6 kW on-board charger, Magne Charge inductive connector |
The Chevrolet S-10 Electric was an American electric-powered vehicle built by Chevrolet. It was introduced in 1997, becoming the world's first electric pickup truck from the original manufacturer,[1] updated in 1998, and then discontinued. It was an OEM BEV variant of Chevrolet's S-10 pickup truck. The S-10 Electric was solely powered by electricity (batteries) and was marketed primarily to utility fleet customers.
General Motors started with a regular-cab, short-box (6feet bed) S-10 pickup, with a base-level trim package plus a half-tonneau cover.In place of a typical inline four cylinder or V-6 internal combustion engine, the Electric S-10 EV was equipped with an 85kW three-phase, liquid-cooled AC induction motor, based on GM's EV1 electric coupe. The EV1 had a 100kW motor; GM reduced the S-10EV's motor output because of the additional weight and drag of the truck so as not to overstress the batteries.
Because the S10 EV shared its major powertrain components with the GM EV1, it used a front wheel drive configuration, as opposed to the rear wheel drive (two-wheel-drive) configuration of the gasoline-powered S10. Its closest competitor, the electric Ford Ranger EV was also rear wheel drive.
Similar to the Gen 1 EV1's, there were lead acid battery and nickel–metal hydride battery options. The 1997 Chevrolet S-10 EV used a lead acid battery pack. Manufactured by Delco Electronics, the battery pack consisted of 27 cells, with one being designated as an "auxiliary" cell. These reportedly offered 16.2 kilowatt-hours for propulsion. In 1998, an Ovonic nickel–metal hydride battery (NiMH) pack was also available; these batteries were lighter and had a combined 29 kilowatt-hours of storage for a longer range. NiMH also has longer life but costs more than the lead acid option. The battery pack was located between the frame rails, beneath the pickup bed. On all battery types, a passive battery monitoring and management system was used; this meant that excess energy was wasted from cells with a higher charge, while the remainder of the cells reach the same state of charge.
The S-10 EV charges using the Magne Charger, produced by the General Motors subsidiary Delco Electronics. The inductive charging paddle is the model J1773 or the 'large' paddle. The small paddle can also be used with an adapter to properly seat it. The standard charger is a 240V 30A (6.6kW); there is also a 120V 15A 'convenience' charger, and a high-power fast-charge version. The vehicle's charging port is accessed by flipping the front license plate frame downwards. The system is designed to be safe even when used in the rain.[2]
Depending on the load and driving conditions the range can vary greatly: For the 1997 model with lead-acid battery pack, city range was 45.5miles; the mixed city/highway range was 47miles; the highway range was 60miles if operating constantly at 450NaN0 or less. The acceleration time was listed as 13.5 seconds (at 50 percent battery charge - the published literature stated that acceleration time was "even less" when the truck had a full charge).
Like the EV1, the top speed of the S-10 EV was governed, albeit to 700NaN0, 100NaN0 less than its coupe sibling.
The performance is much better for the 1998 model year with the nickel–metal hydride battery, at an approximately 90miles range and an acceleration time of 10.9 seconds at 50% charge.
Note: 1998 GM S10 EV NiMh numbers above are apparently wrong. This page lists the NiMH S10 with a 29-kilowatt-hour battery and range of 72miles(EPA) which corresponds to . This corresponds to the NiMH version of the vehicle having a 357lb lighter battery pack than the lead-acid model.
Internally, the instrument cluster was exclusive to the Electric S-10, and featured only four gauges - a speedometer, a large "charge" gauge which reads from 'E' to 'F' like a fuel gauge, a voltmeter ranging from 220 to 440 volts, and a "power use" meter, which acts as an ammeter of sorts showing discharge during acceleration and charge during regenerative braking. The LCD display for the shifter was shortened to display only park, neutral, reverse, and drive, since the S-10 EV does not have the usual transmission.
The S10 EV was developed from the base version of the gasoline-powered S10, and included similar standard equipment. Standard equipment for the S10 EV included an AM-FM stereo radio with two door-mounted speakers, air conditioning, a vinyl-and-cloth-trimmed bench seat, and dual airbags. For colder climates, a fuel-fired heater was standard, which is similar to an engine block heater, and runs on diesel fuel from a 1.7USgal tank. The heater will operate when ambient temperature falls below 37F.
Because battery performance varies greatly with temperature, the heat pump supplies cooling to the batteries during charging when necessary. Passive air recirculation is used during the driving cycle to equalize variations in battery temperature. The heat pump can be activated during the driving cycle under extreme battery over-temperature conditions over 150F, typically as a result of extreme battery discharge.
The S-10 EV was preceded by at least two commercially marketed S-10 electric vehicle conversions performed by third parties:
While the standard S-10 moved to a redesigned front fascia in 1998, the S-10 Electric kept the same front fascia as the '94-'97, with the exception of composite headlamps in 1998 versus the previous year's sealed-beam headlamps. The interior was also updated in 1998 along with internal combustion models, adding a passenger side airbag, a new AM-FM stereo radio, new instrumentation with a digital odometer and trip meter, a new bench seat design, new interior door panels, and a new steering wheel with airbag cover. Aside from this header panel, a unique lower bumper valance, and a stylized 'Electric' decal on the bottom of the doors, there is little difference externally between the appearance of an Electric and a stock S-10. Any changes, however minimal, were reported to have had a positive influence on reducing the truck's aerodynamic resistance. These changes included a closed grille and a front air dam, belly pans beneath the front suspension, a seal between the cab and the pickup bed, and a half-length tonneau cover over the rear of the pickup bed.
Unlike the EV1, of the 492 S-10EVs assembled about 60 were sold to fleet customers, rather than just leased through restrictive programs, mostly due to the prior Department of Transportation crashworthiness evaluations done on stock S-10 pickups. As a result, a few Electric S-10s can still be found in use today. The fleet life of many of these ended in 2007 and 2008. The vehicles (around 440) that were not sold were eventually scrapped, similar to the fate of their EV1 siblings. The white S-10EVs can be seen mixed into the stacks of crushed EV1s in aerial shots toward the end of "Who Killed The Electric Car", most easily identified by their white color, and black half-tonneau covers.
The purpose of the vehicle, though, was primarily to explore the potential of electric trucks early in the history of electric vehicles:[8] [9]
In 2004 GM converted an S-10 EV to rear-wheel drive, using prototype in-wheel electric motors instead of an under-hood motor.
Idaho National Laboratory operated for the U.S. Department of Energy's Office of Nuclear Energy, Science and Technology: