The Canal Age is a term of art used by science, technology, and industry historians. Various parts of the world have had various canal ages; the main ones belong to Egypt, Ancient Babylon, and the historical empires of India, China, Southeast Asia, and mercantile Europe. The successes of the Canal du Midi in France (1681), Bridgewater Canal in Britain (fully completed 1769), and Eiderkanal (superseded by today's Kiel Canal) in Denmark (later Germany) (1784) spurred on what was called in Britain "canal mania". In the Thirteen Colonies in 1762 legislation was passed supporting in the colonial-era Province of Pennsylvania to improve navigation on the Schuylkill River through Philadelphia.
Cultures make canals as they make other engineering works, and canals make cultures. They make industry, and until the era when steam locomotives attained high speeds and power, the canal was by far the fastest way to travel long distances quickly. Commercial canals generally had boatmen shifts that kept the barges moving behind mule teams 24 hours a day.
Technology Archaeologists and Industrial Historians date the American Canal Age from 1790 to 1855[1] based on momentum and new construction activity, since many of the older canals, however limited later by locks that restricted boat sizes below the most economic capacities and well-behind later-developing technological capabilities, nonetheless continued on in service well into the twentieth century.
From the first days of the expansion of the British colonies from the coast of North America into the heartland of the continent, a recurring problem was that of transportation between the coastal ports and the interior. This was not unique to the Americas, and the problem still exists in those parts of the world where muscle power provides a primary means of transportation within a region. An equally ancient solution was implemented in many cultures - things in the water weighed far less and took less effort to move since friction became negligible. Close to the seacoast, rivers often provided adequate waterways, but the Appalachian Mountains, inland, running over long as a barrier range with just five places where mule trains or wagon roads could be routed,[2] presented a great challenge. Passengers and freight had to travel overland, a journey made more difficult by the rough condition of the roads. In 1800, it typically took 2.5 weeks to travel overland from New York to Cleveland, Ohio [{{convert|460|mi}}]; 4 weeks to Detroit [{{convert|612|mi}}].[3]
The principal exportable product of the Ohio Valley was grain, which was a high-volume, low-priced commodity, bolstered by supplies from the coast. Frequently it was not worth the cost of transporting it to far-away population centers. This was a factor leading to farmers in the west turning their grains into whiskey for easier transport and higher sales, and later the Whiskey Rebellion. In the 18th and early 19th centuries, it became clear to coastal residents that the city or state that succeeded in developing a cheap, reliable route to the West would enjoy economic success, and the port at the seaward end of such a route would see business increase greatly.[4] In time, projects were devised in Virginia, Maryland, Pennsylvania, and relatively deep into the coastal states.
The idea of a canal to tie the East Coast of the United States to the new western settlements was already in the air by 1724: New York provincial official Cadwallader Colden made a passing reference (in a report on fur trading) to improving the natural waterways of western New York.
Gouverneur Morris and Elkanah Watson were early proponents of a canal along the Mohawk River. Their efforts led to the creation of the Western and Northern Inland Lock Navigation Companies in 1792 (which took the first steps to improve navigation on the Mohawk and construct a canal between the Mohawk and Lake Ontario),[5] but the company proved that private financing was insufficient.
George Washington led a partly enduring effort to turn the Potomac River into a navigable link to the west, sinking substantial energy and capital into the Patowmack Canal from 1785 until his death fourteen years later.
By 1788 Washington's Potomac Company was successful in constructing five locks which took boats past the Potomac Great Falls. The Chesapeake and Ohio Canal superseded the Potomac Canal in 1823.
Christopher Colles (who was familiar with the Bridgewater Canal) surveyed the Mohawk Valley, and made a presentation to the New York state legislature in 1784 proposing a canal from Lake Ontario. The proposal drew attention and some action but was never implemented.
Jesse Hawley finally got the canal built. He had envisioned encouraging the growing of large quantities of grain on the Western New York plains (then largely unsettled) for sale on the Eastern seaboard. However, he went bankrupt trying to ship grain to the coast. While in Canandaigua debtors' prison, Hawley began pressing for the construction of a canal along the 90miles-long Mohawk River valley with support from Joseph Ellicott (agent for the Holland Land Company in Batavia). Ellicott realized that a canal would add value to the land he was selling in the western part of the state. He later became the first canal commissioner.
The first legislation supporting canals in North America was passed in 1762 in the colonial-era Province of Pennsylvania to improve navigation on the Schuylkill River through Philadelphia, the largest city in North America. It provided for the surveying of a lock canal along the Schuylkill tributary Tulpehocken Creek; this would be built between 1782 and 1828 as the Union Canal, part of the omnibus Pennsylvania legislative package, the Main Line of Public Works, and was the only water route connecting the Susquehanna and Delaware Rivers above the Chesapeake Bay.
Next up there were numerous schemes and bills placed before the Pennsylvania assembly in the 1790-1816 time frame to improve navigation on the Susquehanna, Schuylkill and Lehigh Rivers, the first being the Schuylkill and Susquehanna Navigation Company in 1791. They consumed private capital and public monies, but were little successful. Concurrently, the predecessor of the Erie Canal was begun in New York State and in New England, Connecticut and Massachusetts were looking at a few waterways needing better navigability. The Lehigh Canal was developed when the last of these licenses, awarded in 1816, expired in early 1818 with virtually nothing to show for the funds spent. This expiration allowed the state to give rights-of-way to the Lehigh Navigation and Coal Company in March 1818, founded by two disgruntled formerly enthusiastic backers of the Schuylkill Canal which was chartered in 1812 but like the earlier Lehigh River projects, languished lazily, only raising a small amount of new funds annually, and getting only a little amount of work done accordingly. Josiah White and partner Erskine Hazard needing fuel for their wire mill and nail factory at the falls of the Schuylkill fought this plodding method of incremental improvement for years.[6]
Like many North American canals of the 1820s-1840s, the canal operating companies partnered with or founded short feeder railroads to connect to their sources or markets. Two good examples of this were funded by private enterprise:
Together, they and the Schuylkill Canal-Reading Railroad would supply and transport the majority of Anthracite needed by northern industries in the early North American Industrial Revolution. Unlike Europe, America did not have canals for several hundred years before industrialization. In North America, everything was developed simultaneously.
Early railroads in North America made many canals economically feasible, and canal's needs added to the demands by industries that pushed the early railroads into pressurized research and development and rapid steady improvements.
By 1855, canals were no longer the civil engineering work of first resort, for it was nearly always better - cheaper to build a railroad above ground than it was to dig a watertight ditch 6–8 feet (2–3 m) deep and provide it with water and make annual repairs for ice and freshet damages - even though the cost per ton mile on a canal was often cheaper in an operational sense, canals couldn't be built along hills and dales, nor backed into odd corners, as could a railroad siding.
The Mohawk River, a tributary of the Hudson River, rises near Lake Ontario and runs in a glacial meltwater channel just north of the Catskill range of the Appalachian Mountains, separating them from the geologically distinct Adirondacks to the north. The Mohawk and Hudson valleys form the only cut across the Appalachians north of Alabama, allowing an almost complete water route from New York City in the south to Lake Ontario and Lake Erie in the west. Along its course and from these lakes, other Great Lakes, and to a lesser degree, related rivers, a large part of the continent's interior and many settlements were well connected to the Eastern seaboard.
The problem was that the land rises about 600feet from the Hudson to Lake Erie. Locks at the time could handle up to 12feet, so even with the heftiest cuttings and viaducts, fifty locks would be required along the 360miles canal. Such a canal would be expensive to build even with modern technology; in 1800, the expense was barely imaginable. President Thomas Jefferson called it "a little short of madness" and rejected it; however, Hawley interested New York Governor DeWitt Clinton in the project. There was much opposition, and the project was ridiculed as "Clinton's folly" and "Clinton's ditch." In 1817, though, Clinton received approval from the legislature for $7 million for construction.[7]
The original canal was 363miles long, from Albany on the Hudson to Buffalo on Lake Erie. The channel was cut 40feet wide and 4feet deep, with removed soil piled on the downhill side to form a walkway known as a towpath.[7]
Its construction, through limestone and mountains, proved a daunting task. The canal was built using some of the most advanced engineering technology from Holland. In 1823 construction reached the Niagara Escarpment, necessitating the building of five locks along a 3miles corridor to carry the canal over the escarpment. To move earth, animals pulled a "slip scraper" (similar to a bulldozer). The sides of the canal were lined with stone set in clay, and the bottom was also lined with clay. The stonework required hundreds of German masons, who later built many of New York's buildings. All labor on the canal depended upon human (and animal) power or the force of water. Engineering techniques developed during its construction included the building of aqueducts to redirect water; one aqueduct was long to span of river. As the canal progressed, the crews and engineers working on the project developed expertise and became a skilled labor force.
Canal boats up to NaNfeet in draft were pulled by horses and mules on the towpath. This canal has one towpath generally on the north side. When canal boats met, the boat with the right of way remained on the towpath side of the canal. The other boat steered toward the berm (or heelpath) side of the canal. The driver (or "hoggee", pronounced HO-gee) of the privileged boat kept his towpath team by the canalside edge of the towpath, while the hoggee of the other boat moved to the outside of the towpath and stopped his team. His towline would be unravelled from the horses, go slack, fall into the water and sink to the bottom while his boat decelerated on with its remaining momentum. The privileged boat's team would step over the other boat's towline with their horses pulling the boat over the sunken towline without stopping. Once clear, the other boat's team would continue on its way.
Pulled by teams of horses canal boats still moved slowly but methodically shrinking time and distance. Efficiently, the nonstop smooth method of transportation cut nearly in half the travel time between Albany and Buffalo moving day and night. Venturing West men and women boarded packets to visit relatives or solely for a relaxing excursion. Emigrants took passage on freight boats camping on deck or on top of crates. Packet boats serving passengers exclusively reached speeds of up to 5mph an hour and ran at much more frequent intervals than cramped, bumpy stages.[8]
Packet boats measuring up to 78feet in length and across made ingenious use of space in order to accommodate up to forty passengers at night and up to three times as many in the daytime.[9] The best examples furnished with carpeted floors, stuffed chairs, and mahogany tables stocked with current newspapers and books served as sitting rooms during the days. At mealtimes crews transformed the cabin into dining rooms. Drawing a curtain across the width of the room divided the cabin into ladies' and gentlemen's sleeping quarters in the evening hours. Pull down tiered beds folded from the walls and additional cots could be hung from hooks in the ceiling. Some captains hired musicians and held dances. The canal had brought civilization into the wilderness.
Two early 19th century canals had inordinately large impacts on the demographic and industrial development of the United States. The daring Erie Canal, begun in 1815 after a decade of debate and contemplation was a bid to join the port of New York City to the promise of the Great Lakes, just then undergoing rapid settlement as the 1779 Sullivan Expedition had brushed aside the Iroquois and opened the Northwest Territory to settlement.
See main article: Lehigh and Susquehanna Railroad. Inspired in part by the news of the Erie's technological achievements, the privately funded Lehigh Canal was an achievement brought about by the energy needs of two visionary industrialists, the politically connected Erskine Hazard and his older partner Josiah White, who together built the Lehigh Canal and the Lehigh Coal & Navigation Company, founding towns, mines, and building economically productive mining and transportation infrastructure from a wilderness in Eastern Pennsylvania south and west of the Poconos in the anthracite creating folded ridges of the Ridge and Valley Appalachians. Not a true canal, the Lehigh navigation was the type of canal built along the line of a river valley within its drainage basin and parallel to the fall of the watercourse. The Lehigh Canal for a time was two separate civil engineering projects constructed 20 years apart that stretched over two parts of the Lehigh River and totaling 72miles along the Lehigh River in eastern Pennsylvania.
The Lehigh Navigation & Coal Company sits astride the history of the 1820-1880s Industrial Revolution, and with much the same clout as a modern conglomerate such as General Motors, or General Electric or with the same sorts of innovations as are ascribed to IBM, Microsoft or the like. Leveraging of innovation and immense self-confidence, the Company founders
With the discovery of large surface deposits of anthracite coal, the Lehigh Coal Mine Company (LCMC) was formed in 1792 to secure the mineral rights to vast areas of wilderness west of the Lehigh River ranging beyond to the outcrops atop Sharpe Peak of Pisgah Ridge near present-day Summit Hill, Pennsylvania. The LCMC lacked a principle investor as a hands-on-manager and periodically hired teams to trek to the wilderness to build 'Arks' along the Lehigh near the turnpike operated from Lausanne above Mauch Chunk to the Susquehanna River valley passed by Beaver Meadows and the eventual Beaver Meadows mines, and then attempted to transport the coal down the Lehigh River to the Delaware River and on to the docks in Philadelphia.
The lack of steady effort and an intimately involved company officer in the operations returned sketchy results, most often the expeditions would loose arks on the rapids of the Lehigh and so the LCMC made little profits, and only sporadic efforts over two decades. Inspired by the energy shortfall during the blockade of the War of 1812, the LCMC sent a large expedition out in 1813, which started down the river in spring of 1814 with five arks laden with coal. Only two of them made it to Philadelphia, and both were purchased by Josiah White and partner Erskine Hazard. The LCMC board in its disgust confirmed the unreliability of the fuel source when they let it be known they planned no further risky expeditions as too costly, giving White and Hazard the idea of purchasing the rights to operate the mining company. In the fall of 1814 they mounted an expedition to survey the Lehigh's problems and those of the coal mine and transportation needs for getting its output to the River reliably and regularly.
The lower Lehigh Canal improvements were initially designed and engineered by LC&N founder Josiah White[6] after they'd very quickly become disenchanted with the decisions and strategies of the Schuykill Canal's board of directors,[6] so by the winter of 1814 were very interested in exploring the option of getting coal from Lehigh valley down to Philadelphia the more than, one way or another.,[6] but by late 1822 just as anthracite was achieving early acceptance and the skepticism was waning the drain of building sacrificial 'Coal Arks' for every load delivered to the docks of Philadelphia in 1822 as the LC&N operations were just hitting stride was already a worry to the managing board of directors.[11] By mid-1822, managing director Josiah White was consulting with Canvass White, a veteran designing engineer of New York's Erie Canal locks, and by late 1822 had shifted construction efforts from bolstering and improving the one-way system begun in 1818 with ambitious two-way dams and lock construction capable of taking both a steam tug and a coastal cargo ship all from the Delaware to the slack water pool at Mauch Chunk in present-day Jim Thorpe.