CGR 1st Class 4-4-0 explained

CGR 1st Class 4-4-0
South African Class 01 4-4-0
Powertype:Steam
Designer:Avonside Engine Company
Builder:Avonside Engine Company
Neilson and Company
Serialnumber:Avonside 1215-1216, 1235-1236
Neilson 2547-2552, 2557-2560, 2582
Builddate:1879-1880
Totalproduction:15
Whytetype:4-4-0 (American)
Uicclass:2′Bn2
Driver:1st coupled axle
Leadingdiameter:270NaN0
Coupleddiameter:480NaN0
Tenderdiameter:360NaN0
Wheelbase:33feet
Engine Total:17feet
Leading:4feet
Coupled:6feet
Tender Total:80NaN0
Over Couplers:41feet
Height:120NaN0
Axleload:8lt
Leadingbogie/Pony:7lt
Coupled 1:7lt
Coupled 2:8lt
Weightondrivers:16lt
Locoweight:23lt
Tenderweight:16lt
Locotenderweight:40lt
Tendertype:3-axle
Fueltype:Coal
Fuelcap:2lt
Watercap:1700sigfig=3NaNsigfig=3
Pitch:5feet
Lengthinside:9feet
Smalltubediameter:120: NaN0NaN0
Fireboxtype:Round-top
Boilerpressure:1300NaN0
Safetyvalvetype:Salter
Firearea:10square feet
Totalsurface:565square feet
Tubearea:513square feet
Fireboxarea:52square feet
Cylindercount:Two
Cylindersize:140NaN0 bore
180NaN0 stroke
Valvegear:Stephenson
Valvetype:Slide
Coupling:Johnston link-and-pin
Tractiveeffort:71660NaN0 @ 75%
Operator:Cape Government Railways
South African Railways
Operatorclass:CGR 1st Class, SAR Class 01
Numinclass:15
Fleetnumbers:E8-E14, W25-W26, W33-W38
Deliverydate:1879
Firstrundate:1879

The Cape Government Railways 1st Class 4-4-0 of 1879 was a South African steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1878, the Cape Government Railways placed orders with the Avonside Engine Company for four more 1st Class tender locomotives with a 4-4-0 American type wheel arrangement. They were intended for fast passenger service on the Western and Eastern Systems and were delivered in 1879. In 1880, eleven more of these locomotives followed from Neilson and Company.[1]

Traffic growth

By 1878, increased traffic on the Western System of the Cape Government Railways (CGR) had given rise to a requirement for higher train speeds, which subjected most of the existing mainline locomotives with their small 390NaN0 diameter coupled wheels to rapid wear and resulted in the need for frequent heavy repairs. To meet the rising traffic requirements, orders were placed with Avonside Engine Company for more locomotives with larger diameter coupled wheels, in addition to the existing fleet of 1st Class 4-4-0 tank-and-optional-tender locomotives of 1875.[2]

Manufacturers

In 1879, four 4-4-0 American type tender passenger locomotives were delivered to the CGR from Avonside Engine Company for fast passenger service out of Cape Town and East London respectively. They were equipped with 480NaN0 coupled wheels and six-wheeled tenders, numbered W25 and W26 for the Western System and E8 and E9 for the Eastern System. Their slide valves were actuated by Stephenson Link motion, while their boiler barrels were constructed in three sections, arranged telescopically.[1] [2]

In 1880, they were followed by another eleven locomotives. These were built by Neilson and Company and numbered in the ranges from W33 to W38 for the Western System and E10 to E14 for the Eastern System. This was the first CGR locomotive contract to be awarded to Neilson's.[1] [2]

Depicted is engine no. W35, when new, with the Western System officials who were responsible for the locomotive fleet on board, from left Workshop Foreman E.A. Goodwin, Locomotive Superintendent Michael Stephens and Steamshed Foreman McNamara.

Classification

When a locomotive classification system was later introduced by the CGR, all these locomotives were designated 1st Class. Although Espitalier and Day described them in 1943 as 2nd Class, the Classification of S.A.R. Engines with Renumbering Lists, a booklet which was issued by the Chief Mechanical Engineer's Office in January 1912, lists them as "4-4-0 1st class Avonside & Neilson".[2] [3]

Service

Cape Government Railways

As a result of the distances involved on the new mainlines which were being built into the arid Karoo, the CGR favoured tender locomotives over tank locomotives for mainline work from the outset, given the limited onboard coal and water capacities of tank engines. At the time these locomotives entered service in 1879, the two Eastern System lines from East London were open as far as King William's Town and approaching Queenstown respectively, while the Western System line from Montagu Road was approaching Beaufort West.[4]

The Western line was officially opened to Beaufort West on 5 February 1880. In 1882, one of these new locomotives made a through trip on a special train between Cape Town and Beaufort West and covered the 3390NaN0 in ten hours, stops excluded, maintaining an average speed of 340NaN0. At the time, it was the fastest long journey on record in South Africa.[2]

South African Railways

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways was only implemented with effect from 1 January 1912.[3] [4]

In 1912, the nine surviving locomotives were considered obsolete by the SAR, designated Class 01 and renumbered by having the numeral 0 prefixed to their existing numbers. They were all withdrawn from service by 1915, after having completed a considerable mileage while serving on branchlines after being withdrawn from mainline work.[1] [2] [3]

Renumbering

All these locomotives were renumbered at times during the CGR era. By 1886, all the system prefixes had been done away with and, of the Eastern System's locomotives, three were no longer on the books, while the remaining four had been renumbered in the range from 606 to 609. By 1890, the two Avonside locomotives of the Western System had also been renumbered. By 1910, three more locomotives were no longer on the books and in 1912 the nine remaining locomotives were renumbered with an 0 prefix by the SAR. The builders, works numbers, years in service, original numbers and renumbering of the Cape 1st Class of 1879 are listed in the table.[1] [3]

Notes and References

  1. C.G.R. Numbering Revised, Article by Dave Littley, SA Rail May–June 1993, pp. 94-95.
  2. Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways (Continued). South African Railways and Harbours Magazine, September 1943. pp. 658-659.
  3. Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, p. 25. (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  4. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, pp. 12-13, 25.