CGR 1st Class 0-4-0ST 1876 explained

CGR 1st Class 0-4-0ST 1876
South African Class 01 0-4-0ST 1876
Powertype:Steam
Designer:Hunslet Engine Company
Builder:Hunslet Engine Company
Serialnumber:168, 185-186
Builddate:1875-1876
Uicclass:Bn2t
Driver:2nd coupled axle
Coupleddiameter:300NaN0
Wheelbase:60NaN0
Over Couplers:20feet
Height:100NaN0
Frametype:Plate
Weightondrivers:13lt
Locoweight:13lt
Fueltype:Coal
Fuelcap:151NaN1
Watercap:280impgal
Fireboxtype:Round-top
Firearea:4.5square feet
Pitch:4feet
Diameterinside:2feet outside
Lengthinside:9feet
Boilerpressure:1300NaN0
Safetyvalvetype:Salter
Totalsurface:300square feet
Tubearea:270square feet
Fireboxarea:30square feet
Cylindercount:Two
Cylindersize:NaN0NaN0 bore
160NaN0 stroke
Valvegear:Stephenson
Valvetype:Slide
Coupling:Johnston link-and-pin
Tractiveeffort:4693lbf @ 75%
Operator:Cape Government Railways
South African Railways
Numinclass:3
Fleetnumbers:E2-E4
Deliverydate:1876-1877
Firstrundate:1876

The Cape Government Railways 1st Class 0-4-0ST of 1876 was a South African steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1876 and 1877, three Cape gauge locomotives were placed in service on the Eastern System of the Cape Government Railways. They were designated 1st Class when a classification system was adopted.[1]

Manufacturer

The Hunslet Engine Company delivered three locomotives to the Eastern System of the Cape Government Railways (CGR) in 1876 and 1877. They were similar to the 1st Class of 1875 in most respects, but instead of domeless boilers which took steam from the steam space above the firebox, they had steam domes with large polished brass covers.[1]

The first locomotive arrived in East London in 1876 and was numbered E2. Two more were delivered in 1877, numbered E3 and E4. When a classification system for locomotives was introduced on the CGR, these locomotives were designated 1st Class.[1] [2]

Service

Railway construction out of East London on the Eastern System only began in earnest in 1876. Along with the domeless boilered no. E1, which had arrived in East London in October 1875, these three engines were in all probability also employed as construction locomotives from the outset.[1] [3]

Works numbers and renumbering

By 1888, no. E3 was scrapped and in 1897 no. E2 was sold to the Nederlandsche-Zuid-Afrikaansche Spoorweg-Maatschappij (NZASM), where it was allocated no. 999.

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Even though the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways required careful planning and was only implemented with effect from 1 January 1912.[2] [3]

The sole survivor, no. E4, by then renumbered 602, was considered obsolete by the SAR and was therefore designated Class 01 and renumbered 0602. The works numbers, years in service, original numbers and known renumbering of the locomotives of 1876 are listed in the table.[2]

Notes and References

  1. C.G.R. Numbering Revised, Article by Dave Littley, SA Rail May–June 1993, pp. 94-95.
  2. Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, p. 17. (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  3. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, pp. 11, 25.