Carrier-envelope phase explained
The carrier-envelope phase (CEP) or carrier-envelope offset (CEO) phase is an important feature of an ultrashort laser pulse and gains significance with decreasing pulse duration, in a regime where the pulse consists of a few wavelengths. Physical effects depending on the carrier-envelope phase fall into the category of highly nonlinear optics.
The CEP
is the
phase between the
carrier wave and the position of the
intensity envelope of the pulse (cf. figure in the time domain). In a
train of multiple pulses it is usually varying due to the difference between
phase and
group velocity. The time, after which the phase increases resp. decreases by
is called
. Ideally, it is an integer multiple of the duration
between two pulses and the pulses are picked at the corresponding rate to obtain a constant phase over all picked pulses. Besides this linear evolution, fluctuations which are common in conventional
femtosecond laser systems usually cause a nonlinear shot-to-shot fluctuation of the CEP. This is why measuring and controlling it is very important for many applications.
CEP in the frequency domain and measurement
In the frequency domain, a pulse train is represented by a frequency comb. Here, the carrier-envelope frequency
is exactly the offset frequency of the pulse train, cf. figure. This makes it possible to perform a multi-shot measurement of the CEP, for example by using an f-2f interferometer. Here, the pulses to be measured are broadened to a
bandwidth of at least one octave. A long-wavelength part of the pulse is
frequency doubled and the
beat note between it and the short-wavelength part of the fundamental pulse is measured. This is better known as the offset phase.
With a phase-locked loop, a property of the laser oscillator such as the optical path length can be adjusted correspondingly to the obtained offset frequency and thus the phase can be stabilized.
Bibliography
