The BKB-1 was constructed in 1959 and built entirely from wood. The 391NaN1 wing was swept, had a 9.5:1 aspect ratio and employed a NACA 8-H-12 airfoil. The aircraft had a very high wing area of 160square feet which resulted in a light wing loading of just 3.81 lb/sq ft (18.6 kg/m2).[3]
The prototype BKB-1 was originally registered in Canada as CF-ZDK-X. Later it was moved to the United States, owned by Kasper and registered as N2991G.[4]
As a testbed the aircraft went through several modification states. The modifications included aerodynamic devices to improve aircraft control above the stalling angle. These reduced the stall speed to 200NaN0 and resulted in a 200 ft/min (1.0 m/s) rate of descent while stalled. This allowed stalled landings with no ground roll. As a result of these and other design changes the aircraft was designated as the BKB-1A, the "A" indicating aerobatics. The aircraft was intended to be fully aerobatic, including tumbling maneuvers.
Kasper had a plan to produce the aircraft and the developmental derivative Kasper Bekas, which mount different wings to a common fuselage, as a single kit, with the choice of wings, but it seems none was actually produced.
The sole BKB-1A was destroyed on 6 November 1971 near Arlington, Washington, when a pilot conducted unauthorized aerobatics in the aircraft, subjecting it to an estimated negative 30g during a high-speed inverted descent. The 31-year-old commercial pilot, who had a total of 3000 flying hours and five hours on type, was wearing a parachute, but did not bail out and was killed in the accident. The National Transportation Safety Board cited as cause factors that the pilot misjudged the aircraft's speed and overstressed the airframe to failure.[5]