Broadway Bridge (Daytona Beach) Explained

Bridge Name:Broadway Bridge
Official Name:Broadway Bridge
Carries:4 lanes of
VOTRAN bus routes
pedestrians, and bicycles
Crosses:Halifax River,
Intracoastal Waterway
Locale:Daytona Beach, Florida
Maint:Florida Dept. of Transportation
Id:790187, 790188[1]
Designer:Figg Engineering Group
Design:Segmental Box Girder
Material:Prestressed concrete
Length:917 meters (3,008 feet)
Below:19.9 meters (65 feet)
Complete:1912 (First bridge)
1947 (Second bridge)
2001 (Third bridge)
Toll:Free
Coordinates:29.2158°N -81.0156°W

The Broadway Bridge is a segmental bridge that spans the Halifax River and Intracoastal Waterway in downtown Daytona Beach, Florida, carrying U.S. Route 92.

The Broadway Bridge reaches a height of 65 feet (19.9 m) and is 3,008 feet (917 m) in length. The bridge is more famous for its flair than its purpose. Mosaics of manatees, dolphins and other wildlife native to Florida give the bridge some tourist appeal.

The bridge was dedicated on July 20, 2001.

History

First bridge

Plans for the original Broadway Bridge were approved by the U.S. Army Corps of Engineers on May 4, 1912. Michael Sholtz (father of future Governor David Sholtz), President of Central of Florida Railway Company, petitioned the Corps for the new bridge which he planned to use for his company's electric streetcar system, that would connect the cities of Daytona, Daytona Beach, and Seabreeze (separate cities at the time, before consolidating in 1926) across the Halifax River.[2] [3]

The bridge was simply referred to as the concrete bridge for many years, until it started to be called the Broadway Bridge. It likely picked up the name because it connected to Broadway Avenue (now named International Speedway Blvd.) on the beach side.[4]

Second bridge

By 1947, the Broadway Bridge was carrying traffic for a spur of State Road A1A and State Road 600. The State Road Department determined a new four-lane drawbridge was needed to replace the old structure. Tidewater Construction Corporation of Norfolk, Virginia, was awarded the contract to construct the bridge, and started work on February 6, 1947. The overall length was 1777 feet with a channel span of 104 feet, allowing 90-foot clearance with the double-leaf bascule (drawbridge) open.[5]

The second Broadway Bridge over the Halifax River was officially opened on November 8, 1948, and dedicated in honor of Robert T. Carleton, Road Department member of the Fifth District, and Elmer Blank, Volusia County Commissioner. Although the name "Carleton-Blank Bridge" appeared on state maps, the local community continued to refer to the structure as the Broadway Bridge.[5] [6] [7]

Third Bridge

The State Road Department reported that the 1948 lift bridge occurred several problems, and it could be better to build a bigger bridge. Construction on the new bridge started on March 4, 2000.

The new bridge opened on July 20, 2001. The original bridge has since been demolished.

See also

References

  1. http://www.dot.state.fl.us/statemaintenanceoffice/CBR/Florida%20Bridge%20Information%2001-05-2009.pdf Florida Dept. of Transportation, Florida Bridge Information
  2. Report of the Chief of Engineers U.S. Army By United States Army. Corps of Engineers (1912) Pg. 1307
  3. McGraw Transit Directory (1918) Pg. 24
  4. Ianthe Bond Hebel, Centennial History of Volusia County, Florida, 1854-1954 (Daytona Beach, 1955), Pg. 10
  5. Florida Highways, By Florida State Road Dept, Florida Highway Patrol, Published by J.E.Robinson, 1948
  6. Annual Report of the Attorney General of the State of Florida - Page 144, by Florida Attorney General - Attorneys General's opinions - 1948
  7. Fifth International Bridge Engineering Conference: Tampa, Florida April 3–5 - Pg. 31 by National Research Council (U.S.). Transportation Research Board - Bridges - 2000

External links