| British Rail 18100 | |
| Powertype: | Gas turbine-electric |
| Builder: | Metropolitan-Vickers, Trafford Park |
| Ordernumber: | GWR Lot 388 |
| Builddate: | 1951 |
| Transmission: | DC generators DC traction motors |
| Britishclass: | Co-Co |
| Wheeldiameter: | 3feet |
| Trainbrakes: | Vacuum |
| Wheelbase: | 53feet |
| Length: | 66feet |
| Width: | 9inchesft0inchesin (ftin) |
| Height: | 12inchesft10inchesin (ftin) |
| Locoweight: | 129.5LT |
| Maxspeed: | 900NaN0 |
| Poweroutput: | 3000hp At rail: 2450hp |
| Generator: | Metropolitan-Vickers, 3 off |
| Tractionmotors: | Metropolitan-Vickers, 6 off |
| Tractiveeffort: | 600002NaN2 |
| Powerclass: | BR Type 5 |
| Trainheating: | Spanner steam generator |
| Operator: | British Railways |
| Retiredate: | December 1957 |
| Firstrundate: | 1952 |
| Lastrundate: | 1954 |
| Disposition: | Rebuilt to 25 kV electric locomotive E1000 (E2001 from 1959) |
British Rail 18100 was a prototype main line gas turbine-electric locomotive built for British Railways in 1951 by Metropolitan-Vickers, Manchester. It had, however, been ordered by the Great Western Railway in the 1940s, but construction was delayed due to World War II. It spent its working life on the Western Region of British Railways, operating express passenger services from Paddington station, London.
The main image is of 18100 at Bristol on April 5th 1952 having brought in the Merchant Venturer. There are images available of the locomotive in front of The Bristolian and in the works at Metro-Vickers in Manchester. Nearby are images of 18100 in retirement having been "stored" on a disused section of the GCR link between Ashendon (GWR) and Grendon junction (GCR). The site was near the A41 bridge and mile post 168. It seems that one of the coaches was used as weather station. Another image at the bottom of the page was also taken at Akeman street in 1969.
It was of Co-Co wheel arrangement and its gas turbine was rated at 3000hp. It had a maximum speed of 90mi/h and weighed 129.5LT. It was painted in BR black livery, with a silver stripe around the middle of the body and silver numbers.
The gas turbine was of a type which would now be called a turboshaft engine but it differed from modern free-turbine turboshaft engines in having only one turbine to drive both the compressor and the output shaft. It was based on aircraft practice and had six horizontal combustion chambers (spaced radially around the turbine shaft) and no heat exchanger.
The emphasis was on power, rather than economy, and the fuel consumption was high. It was designed to use aviation kerosene and was much more expensive to run than No. 18000, which used heavy fuel oil. The turbine drove, through reduction gearing:
Each main generator powered two traction motors. Unlike No. 18000, there was no auxiliary diesel engine and the turbine was started by battery power, using the main generators as starter motors.
The following table gives a comparison between 18000 and 18100. There are some anomalies and these are described in the notes.
| Value | 18000 | 18100 | Notes | |
|---|---|---|---|---|
| Weight (tons) | 115 | 129 | - | |
| Turbine horsepower | 10,300 | 9,000 | (1) | |
| Power absorbed by compressor | 7,800 | 6,000 | (1) | |
| Output horsepower | 2,500 | 3,000 | (1) | |
| Number of traction motors | 4 | 6 | - | |
| Total traction motor horsepower | 2,500 | 2,450 | (2) | |
| Starting tractive effort (lbf) | 31,500 | 60,000 |
Notes:
In early 1958 it was withdrawn from operation and was stored at Swindon Works for a short period before it was returned to Metropolitan Vickers for conversion as a prototype 25 kV AC electric locomotive. As an electric locomotive, it was numbered E1000 (E2001 from 1959) and was given the TOPS classification of class 80.
18100 is being made as a kit and ready-to-run in OO gauge by Silver Fox Models.[1]