Boise River and Canal Bridge explained

Bridge Name:Boise River and Canal Bridge
Carries:One multi-direction lane of W. Plymouth St
Coordinates:43.6889°N -116.6869°W
Crosses:Boise River, Caldwell, Idaho
Design:Warren camelback through-truss
Builder:American Bridge Company
Extra:
Embed:yes
Boise River and Canal Bridge
Refnum:07000003

The Boise River and Canal Bridge, in Caldwell, Idaho, is a three-span, 390abbr=onNaNabbr=on Warren camelback through-truss design constructed in 1922 by the American Bridge Company from plans submitted by Caldwell city engineer Fred H. McConnel. The site is where Oregon Trail pioneers forded the Boise River. The bridge was listed on the National Register of Historic Places in 2007.

The Boise River and Canal Bridge replaced an earlier bridge known as the Canyon Hill Bridge, and when the new bridge was commissioned by Canyon County officials, it continued under the same name.[1] Later, the bridge became known as Idaho Pacific Highway Bridge, Highway 30 Bridge, or Silver Bridge.[2]

The bridge road width, 19.5abbr=onNaNabbr=on, only allows for one automobile traffic lane, and vertical clearance is limited to 14.1abbr=onNaNabbr=on. These factors and that the bridge is beyond its functional lifespan have prompted Canyon County officials to consider refurbishing the Boise River and Canal Bridge as a pedestrian only bridge and building a new bridge for motorized traffic near the site.[3]

Notes and References

  1. Web site: Notice to Contractors . 1922-02-17 . Caldwell Tribune . 2018-08-26.
  2. Web site: Destination Caldwell: History . 2018-08-26.
  3. Web site: The Old Highway 30 Bridge Project . 2018-08-26.