| Powertype: | Steam |
| BR Standard Class 5 | |
| Designer: | R. A. Riddles |
| Builder: | BR Derby Works (130) BR Doncaster Works (42) |
| Builddate: | April 1951 - June 1957 |
| Totalproduction: | 172 |
| Uicclass: | 2′C h2 |
| Leadingdiameter: | 3feet |
| Driverdiameter: | 6feet |
| Length: | 62feet |
| Width: | 8feet |
| Height: | 13feet |
| Axleload: | 19.7LT |
| Weightondrivers: | 58.05LT |
| Locoweight: | 76LT |
| Tenderweight: | BR1/BR1H: 49.15LT; BR1B: 51.25LT; BR1C: 53.25LT; BR1F: 55.25LT; BR1G: 52.5LT; |
| Tendertype: | BR1 (50), BR1B (62), BR1C (35), BR1F (10), BR1G (3), BH1H (12) |
| Fuelcap: | BR1C: 9LT; All others: 7LT |
| Watercap: | BR1/BR1H: 4250impgal; BR1B/BR1C: 4725impgal; BR1F: 5625impgal; BR1G: 5000impgal |
| Boiler: | BR3 |
| Boilerpressure: | 2252NaN2 |
| Firearea: | 28.7square feet |
| Fireboxarea: | 171square feet |
| Tubesandflues: | 1479square feet |
| Superheaterarea: | 358square feet |
| Cylindercount: | Two, outside |
| Cylindersize: | 19x |
| Valvegear: | Walschaerts (73000–73124, 73155–73171) Caprotti (73125–73154) |
| Tractiveeffort: | 261241NaN1 |
| Factorofadhesion: | 4.98 |
| Operator: | British Railways |
| Powerclass: | 5MT |
| Fleetnumbers: | 73000–73171 |
| Axleloadclass: | Route availability 7 BR (WR): Red |
| Withdrawndate: | February 1964 – August 1968 |
| Disposition: | Five preserved, remainder scrapped |
The British Railways Standard Class 5MT is one of the 12 BR standard classes of steam locomotive built by British Railways in the 1950s. It was essentially a development of the LMS Stanier Class 5 4-6-0 ("Black Five"). A total of 172 were built between 1951 and 1957.
William Stanier's Black Five had been the most successful mixed-traffic type in Great Britain. Construction of the Black Fives had started in 1934 and continued past nationalisation to 1951. A new set of 'standard' locomotives was to be built by British Railways, based on LMS designs and incorporating modern ideas.
In particular, the Standard design incorporated features designed to make disposal of the engine after a working "turn" easier: a self-cleaning smokebox and a rocking grate removed the necessity for crews to undertake dirty and strenuous duties at the end of a long shift.[1] This was a necessary investment with the ever-increasing costs of labour following the Second World War.
The original design proposal for the class 5 locomotive had a wheel arrangement,[2] similar in concept to the Bulleid Light Pacifics that performed impressively during the 1948 Locomotive Exchanges. However this was deemed unnecessarily large and costly for a class 5 power requirement, so the successful LMS Class 5 design was used as the basis instead. The pacific design went on to be enlarged and used for the BR Standard Class 6.
The design work was done at the ex-LNER Doncaster Works but the bulk of the construction was done at Derby Works. The locomotive featured a BR standard boiler very similar in dimensions to the Stanier Type 3B fitted to the Black Fives, but made from manganese steel instead of nickel steel. The most obvious visible changes were a higher running plate, slightly enlarged driving wheels (from 6feet to 6feet), increased cylinder bore (from 18½ in (457 mm) to 19 in(483 mm)), a standard cab with external pipework and the regulator gland on the driver's side of the boiler below the dome. Many of these changes were to reduce maintenance or to incorporate standard components that could be shared between other standard classes.
The first of the class, 73000, was outshopped from Derby in April 1951 and 30 were in service by January 1952. There was then a gap in construction before Derby resumed building its remaining 100 engines. 42 were built at Doncaster, starting in August 1955 and finishing in May 1957, with Derby's last engine following a month later.
Thirty engines, numbers 73125 to 73154, were built with Caprotti valve gear and poppet valves.
| 73000–29 | 1951 | Derby | BR1 | Walschaerts | 25 for LMR, 5 for ScR | |
| 73030–49 | 1953 | Derby | BR1 | Walschaerts | 10 for LMR, 10 for ScR | |
| 73050–52 | 1954 | Derby | BR1G | Walschaerts | for SR (S&DJR) | |
| 73053–64 | 1954 | Derby | BR1H | Walschaerts | 10 for LMR, 2 for ScR | |
| 73065–71 | 1954 | Derby | BR1C | Walschaerts | for LMR | |
| 73072–79 | 1955 | Derby | BR1C | Walschaerts | 3 for LMR, 5 for ScR | |
| 73080–89 | 1955 | Derby | BR1B | Walschaerts | for SR | |
| 73090–99 | 1955 | Derby | BR1C | Walschaerts | for LMR | |
| 73100–09 | 1955 | Doncaster | BR1B | Walschaerts | for ScR | |
| 73110–19 | 1955 | Doncaster | BR1F | Walschaerts | for SR | |
| 73120–-24 | 1956 | Doncaster | BR1B | Walschaerts | for ScR | |
| 73125–34 | 1956 | Derby | BR1B | Caprotti | Poppet valves; for WR | |
| 75135–44 | 1956 | Derby | BR1C | Caprotti | Poppet valves; for LMR | |
| 73145–54 | 1957 | Derby | BR1B | Caprotti | Poppet valves; for ScR | |
| 73155–59 | 1956 | Doncaster | BR1B | Walschaerts | for ER | |
| 73159-71 | 1957 | Doncaster | BR1B | Walschaerts | for NER |
These locomotives had a trouble-free introduction in comparison to several of the other Standard classes and were used interchangeably with the pre-nationalisation class 5 engines they supplemented. They were utilised as the haulage power on duties varying from fast passenger trains to slow unfitted freight trains, displaying their versatility.
Different regional allocations had differing tender designs, with locomotives assigned to the Southern Region having tenders with high water capacity to make up for the lack of water troughs.
Like the "Clan" class locomotives, the Standard 5s, with their high-stepped running board, were partly conceived to be more economical and serviceable replacements for the Bulleid Pacific. The Standard 5s were also quite the speedy engines, they could really fly when fired hard, with many engine men claiming they could easily reach just under 100 mph. Like the Clans, which could only manage one more carriage on an express than a 'Five' the Standard Fives took a long time to shake down, and only started to really pull when different firing techniques, which allowed them to steam using poor quality coal were developed.[3] They pulled much of the traffic on the last express lines for steam in the mid and late 1960s: Edinburgh-Aberdeen, London- Southampton-Bournemouth- Weymouth and local express traffic in the North and Midlands around Sheffield and Leeds. They were also used on the locals between Liverpool, Manchester and Blackpool, some steam hauled to the last day of steam in 1968.
In 1959, 20 of the Southern Region locomotives were named, the names being transferred from SR King Arthur class locos that were then being withdrawn. These were:
| 1964 | 172 | 15 | align=left | 73012/17/24/27/46–47/52/58/61/74/76, 73109/16/61/64. | |
| 1965 | 157 | 43 | align=left | 73001/03/08/15/21/23/30–32/36/38/41–42/44/49/51/54/56/62–63/68/75/77/84/90–91, 73103–04/06/11–12/22–24/47–48/52/62–63/65–68. | |
| 1966 | 114 | 38 | align=left | 73005/07/09/13/16/28/55/57/72/78/80–83/86–89/95/98–99, 73101–02/05/07–08/14/20–21/45/49–51/53–54/69–71. | |
| 1967 | 76 | 53 | align=left | 73002/04/06/11/14/18–20/22/25–26/29/37/39/43/45/48/59–60/64–66/70–71/73/79/85/92–94/96–97, 73100/10/13/15/17–19/27/29–30/37/39–41/44/46/55–56/58–60. | |
| 1968 | 23 | 23 | align=left | 73000/10/33–35/40/50/53/67/69, 73125–26/28/31–36/38/42–43/57. | |
See main article: Eastbourne rail crash.
The main variation across the class was the valve gear, with 142 using Walschaerts valve gear and the remaining 30 using British Caprotti valve gear. There was little difference in performance between the two groups, but the Caprotti fitted engines had a reputation for being good performers at higher speeds. There was potential for more BR standard locomotives to have Caprotti valve gear fitted as it allowed for longer periods between inspections, offsetting the higher initial cost of this valve gear.
Doncaster had designed double chimneys for the class, similar to the ones used on several of the BR Standard Class 4 4-6-0. If applied, this would have improved the draughting and increased the efficiency of the locomotives. With the Modernisation Plan of 1955 and the good performance of the class from the outset, these plans were shelved permanently.
Another proposal was to produce freight locomotives based from this design in response to criticism by the Western Region on the BR Standard Class 9F. The management believed that the 9Fs were too large and powerful for most heavy freight traffic, along with being far more expensive to build and operate than the older 2-8-0 locomotives they supplemented. In response to this, the British Transport Commission drew a 2-8-0 Class 8F based on the Standard Class 5, like the LMS class 5 and 8Fs. Changes included a higher boiler pressure of 250 psi and driving wheels in diameter to increase tractive effort. Preparations were made for series production to begin, but the work ceased after the Modernisation Plan was published.
Five members of the class survive and all have steamed in preservation with examples from both builders. 73050 was purchased directly from British Railways for preservation while the other four engines were rescued from Woodham Brothers scrapyard at Barry Island. To date 73096 has been the only member of the class to operate on the main line hauling railtours but in 2018 no. 73082 was moved by rail from its home at the Bluebell Railway to the West Somerset Railway.[5]
| Number & Name | Tender Attached | Builder | Built | Withdrawn | Service life | Location | Livery | Status | Image | |
|---|---|---|---|---|---|---|---|---|---|---|
| 73050 "City of Peterborough" | BR1G | Derby Works | April 1954 | June 1968 | 14 Years, 2 months | Nene Valley Railway | BR Lined Black, Early Emblem | Boiler ticket expired in 2015, Under Overhaul | ||
| 73082 "Camelot" | BR1B | Derby Works | July 1955 | June 1966 | 10 years, 11 months | Bluebell Railway | BR Lined Black, Early Emblem | Operational until 2031 | ||
| 73096 | BR1G | Derby Works | Nov 1955 | Nov 1967 | 12 years | Mid Hants Railway | BR Lined Green, Late Crest | Purchased by and transferred to the Watercress Line, at which it was formerly a resident under private ownership, in November 2017. Boiler certificate expired in September 2011 awaiting overhaul | ||
| 73129 | BR1B | Derby Works | Aug 1956 | Dec 1967 | 11 years, 4 months | Midland Railway - Butterley | BR Lined Black, Early Emblem | Static Display, Boiler ticket expired in 2016. One of only two engines left in Britain with Caprotti valve gear. | ||
| 73156 | BR1B | Doncaster Works | Dec 1956 | Nov 1967 | 10 Years, 11 months | Great Central Railway | BR Lined Black, Late Crest | Recently emerged from scrapyard condition and came into full traffic in May 2018. |