Aviemore Dam | |
Name Official: | Aviemore Dam |
Dam Crosses: | Waitaki River |
Res Name: | Lake Aviemore |
Location: | Canterbury/Otago, New Zealand |
Operator: | Meridian Energy |
Construction Began: | 1962 |
Opening: | 1968 |
The Aviemore Dam is a dam on the Waitaki River in New Zealand. The dam is a composite dam, with an embankment section, and a concrete section. Built in the 1960s (and completed in 1968)[1] it impounds Lake Aviemore.
Aviemore Dam is owned and operated by Meridian Energy, and its primary purpose is to power a hydroelectric power plant. It is a part of the Waitaki River Hydroelectric System, a scheme which supplies 30% of New Zealand's considerable amount of hydropower.[2]
The founding conditions of the dam differ on either side of the Waitangi Fault, hence different dam construction types are used. On the northern side of the valley (Canterbury side), the dam is founded on greywacke rock, and consists of a 335m (1,099feet)-long concrete structure. On the southern side of the valley (Otago side), the dam is founded on tertiary sedimentary rock, an consists of a long zoned embankment (earth) dam. During the construction of the concrete section, low-heat cement was first used in a large-scale application in New Zealand, to allow quick concrete pouring without the need for cooling elements. The dams spill outlets and penstocks are incorporated into the concrete dam section.
The dam's hydroelectric generation facilities consist of 4 Francis turbines each of, with a total capacity of total), with the generators being 4 x 11 kV. The facility produces approximately of electricity per year. The net hydraulic head is, with the penstocks (water pipes leading to the turbines) being the largest diameter in New Zealand at the time of construction, at diameter each.[3]
In the mid 2000's (decade), work was undertaken to enhance the dam and its appurtenant structures against the effects of earthquake loads, and to reduce the risk of overtopping resulting from earthquake-induced seiche waves in Lake Aviemore, in the event of rupture of the Waitangi Fault.
At the time of construction the Waitangi fault had been considered inactive, but investigations in the early 2000's found the fault to be active (but with low probability of movement). The analysis and safety evaluation of the dam, and design of enhancements was led by URS Consultants, who received an ACENZ Innovate NZ Silver Award for their safety evaluation & upgrade.[4]