Autogenerative high-pressure fermentation is a biogas production technique that takes place under increased gas pressure. This gas pressure is generated by the bacteria and archaea themselves through the gases they excrete. This technique was first described by R. Lindeboom of the University of Wageningen (WUR) in 2011.[1] A batch reactor was then increased to a pressure of 58 bar, resulting in a methane content in the biogas of 96%. In the scientific literature, this technique is also often called HPAD, 'High Pressure Anaerobic Digestion.
Autogenerative high-pressure fermentation (AHPD) works based on the higher solubility of CO2 (0.031 mol/l/bar) compared to that of CH4 (0.0016 mol/bar). l/bar). This significant difference allows more CO2 dissolution in the aqueous phase (digestate). According to the same principle, hydrogen sulfide (H2S) also dissolves better. This results in a biogas with an increased methane content. As a result, the gas requires less processing to be upgraded to the quality of natural gas. This also reduces the cost of these operations.[2]
Microbial composition.Individual species microorganisms have their optimal conditions in which they grow and replicate most rapidly. Commonly known are pH, temperature, salinity, etc., but pressure is also one of them. Some bacteria and archaea have adapted to life in the deep oceans, where the pressure (Hydrostatic pressure) is much higher than at sea level. For example, the methane-producing archaea species Methanocaldococcus, Methanothermococcus, Methanopyrus and Methanotorris have been found in hydrothermal vents in the ocean floor.[3] Research at the University of Groningen (RUG) has shown that the bacterial community is affected by pressure from composition changes.[4] This makes it possible to influence the anaerobic digestion process.A further development of this technique is the addition of hydrogen gas to the reactor. Like other gases, this also dissolves better at increased pressure. The result is that it can be better absorbed by bacteria and archea. These then convert the hydrogen gas with the already dissolved carbon dioxide into additional methane. This combination of techniques was described in detail by Kim et all in 2021.[5] This process is known as biological methanation. On Michael Liebreich's hydrogen ladder 5.0, this form of biogas upgrade is at step C. This is considerably higher than applications as fuel in vehicles. These are spread over steps D to G.[6]
Although the technique is usually used as a fermentation process for thick liquid flows and solid biomass, it can also be applied as anaerobic Wastewater treatment. In South Korea they have succeeded in operating a UASB reactor (a form of anaerobic wastewater treatment) at 8 Bar. [7] A biogas was then created with a methane content of 96.7%. A remarkable finding was that the grains in the sludge that are so characteristic of the UASB technique were well preserved. This was because more Extracellular polymeric substance (EPS) was formed in the biofilm. Microorganisms make these to protect themselves against difficult conditions. In this case the pressure.