AmeriPlanes Mitchell Wing A-10 explained
The
Mitchell Wing A-10 and
T-10 are a family of American cantilever,
tricycle landing gear, high-wing,
pusher configuration, one and two seat
ultralight aircraft designed for
amateur construction or supplied as completed aircraft. The aircraft were designed by
Don Mitchell and were produced by a number of companies, the last being AmeriPlanes of
Truro, Iowa.
[1] [2] [3] [4] [5] Development
The A-10 is a 1982 development of the Mitchell Wing B-10 ultralight, itself developed from the Mitchell Wing hang glider of 1977. Their designer Don Mitchell had worked on the Northrop YB-49 bomber project. In place of the B-10's composite wing, the A-10 features a metal wing, attached in cantilever fashion to an open cockpit that can be equipped with a streamlined pod. The low-drag design results in a 16:1 glide ratio for the A-10. The aircraft can be used as a motor glider or as a cross country touring aircraft.[6]
The wing is constructed from sheet aluminium, with a main spar in the form of a D-cell. The ribs are made from aluminium sheet and the wing is covered in the same material. The fuselage is built from aluminium tubing, riveted together. A cockpit streamlined pod was optional. The design has folding wings and was intended for trailering from the onset.
The standard engine for the A-10 is the 280NaN0 Rotax 277, but the 400NaN0 Rotax 447 and the 220NaN0 Zenoah G-25 have also been installed. Construction time of the kit was rated as 80–120 hours.
The A-10 was produced by a number of companies, including Mitchell Aircraft Corporation and Mitchell Wing, Inc. of Porterville, California, MitchellWing Aircraft Company of Kansas, Tulsa Mitchell Wing, Inc. of Tulsa, Oklahoma, Higher Planes of Dover, Kansas and lastly AmeriPlanes of Truro, Iowa. AmeriPlanes acquired the design on 15 April 1998 when Larry Smith took possession of the MitchellWing Aircraft Company. Ameriplanes was a one-person company and provided both kits and completed aircraft, but the company went out of business in the mid-2000s and the A-10 is no longer in production.
The A-10 was developed into a two-seat trainer, with side-by-side seating, designated the T-10. The T-10 incorporated three feet more wingspan and has a reduced glide ratio of 14:1.
Variants
- A-10
Single seat design powered by a 280NaN0 Rotax 277, 400NaN0 Rotax 447 or 220NaN0 Zenoah G-25.
- A-10B Plain Jane
Basic, stripped down single seat design powered by a 220NaN0 Zenoah G-25. From the factory the model did not include the cockpit streamlining pod or other extras and was intended to comply with the US FAR 103 Ultralight Vehicles regulations, with an empty weight of 2500NaN0[7]
- A-10D
Deluxe model improved single seat design powered by a 220NaN0 Zenoah G-25.
- T-10
Two seat side-by-side design powered by a 400NaN0 Rotax 447 or 500NaN0 Rotax 503.
- T-10D
Deluxe model two seat side-by-side design powered by a 450NaN0 Zenoah G-50.Aircraft on display
External links
Notes and References
- Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-38 & B-92. Cybair Limited Publishing, 2001.
- Purdy, Don: AeroCrafter – Homebuilt Aircraft Sourcebook, page 308. BAI Communications.
- Web site: AmeriPlanes Home . 26 June 2010 . AmeriPlanes . September 2007 . https://web.archive.org/web/20060830010229/http://www.ameriplanes.com/index.html . 30 August 2006 . dead .
- Web site: MitchellWing News. 26 June 2010. Smith. Larry D.. 1999.
- Web site: Ameriplanes Mitchell Wing A-10. 26 June 2010. Pilot Friend. n.d..
- Web site: About MitchellWing, founder, History and Current Owner . 26 June 2010 . Smith . Larry . 2000 . dead . https://web.archive.org/web/20060830010418/http://www.ameriplanes.com/broker/bio.html . 30 August 2006 .
- Web site: Specifications . 26 June 2010 . AmeriPlanes . September 2007 . dead . https://web.archive.org/web/20070923205343/http://www.ameriplanes.com/pages/spec.html . 23 September 2007 .
- Web site: Mitchell Wing Silver Eagle A-10. 3 December 2012. . 2012.
