| Alfa Romeo 8C Competizione Alfa Romeo 8C Spider | |
| Manufacturer: | Fiat Group Automobiles |
| Assembly: | Italy: Modena (Maserati)[1] |
| Production: | 2007–2009 (coupé)[2] 2008–2010 (spider)[3] |
| Class: | Sports car (S) |
| Body Style: | 2-door coupé 2-door spider |
| Layout: | Front mid-engine, rear-wheel-drive |
| Engine: | 4691cc Ferrari/Maserati F136 YC V8 |
| Transmission: | 6-speed automated manual[4] |
| Wheelbase: | 2646NaN[5] |
| Length: | 4381NaN |
| Width: | 1894NaN |
| Height: | 1341NaN (coupé) 1308NaN (roadster)[6] |
| Weight: | 1585NaN (coupé) 1675NaN (roadster) |
| Predecessor: | Alfa Romeo SZ & RZ |
| Powerout: | 3310NaN0 480Nm of torque |
| Designer: | Wolfgang Egger and Daniele Gaglione[7] [8] at Centro Stile Alfa Romeo |
The Alfa Romeo 8C Competizione is a sports car produced by Italian marque Alfa Romeo between 2007 and 2010. It was first presented as a concept car at the 2003 Frankfurt Motor Show. The name refers to the eight-cylinder (cilindro in Italian) engine (8C) and Alfa Romeo's racing pedigree (Competizione, Italian for 'competition'). The company received over 1,400 orders for the 8C after the official announcement that the car would enter production.[9] However, only 500 customers ended up with the 8C Competizione and another 329 with the 8C Spider, bringing the production total to 829 cars.
The 8C Competizione was first shown to the public at the Frankfurt Motor Show in 2003. Designed by Wolfgang Egger and Daniele Gaglione at Centro Stile Alfa Romeo, the lines of the twin seater are meant to echo the styling of Alfa Romeo automobiles of the 1950s and 1960s, and the "Competizione" name is a reference to the 1948 6C 2500 Competizione,[10] which competed in the 1949 and 1950 Mille Miglia race and secured third position both times. It was in the latter of these two races that the car was driven by Juan-Manuel Fangio and Augusto Zanardi. It won the 1950 Targa Florio. A 3.0-litre prototype was built but not produced. These 6C 2500 models were among the last vehicles with links to the pre-war cars. The concept was purely meant to be a styling exercise with no drive train.[11]
During the Mondial de l'Automobile 2006, Alfa Romeo announced the production of the 8C Competizione (500 units). The production version is very similar to the concept; the biggest difference to the exterior being the rear-hinged hood.[12] Other minor changes included the front lights, which used Xenon lamps, a standard wiper system, a mesh side vent, and the wheels, which had a design that mimicked the cloverleaf logo. The car came standard in Alfa Red or Black colours. Pearl Yellow and the Special Competition Red were also available as an option.[13] Paint-to-sample colors were also available for an additional charge, and so, the cars were produced in a wide range of colours, such as white, with a Maserati range (Fuji White, Blue Avio, Blue Oceano, Grigio Nuvolari) and a Ferrari range (Blue Pozzi, Vinaccia).[14] The bodyshell is made of carbon fibre, produced by ATR Group.
The carbon fibre body is fitted to a steel chassis, made by Italian company ITCA Produzione. Final assembly took place at the Maserati factory in Modena.[15]
An 8C Competizione was featured on the main sculpture at the 2010 Goodwood Festival of Speed. One of the two remaining Alfa Romeo P2s was also part of the display.[16]
The car uses a unique platform that shares several components with the Maserati GranTurismo.[17] [18] The powertrain features a Ferrari/Maserati derived cross-plane,[19] wet sump lubricated 4691cc 90° V8 engine assembled by Ferrari.[1] The top engine performance figures may be summarized as a maximum power output of at 7,000 rpm and a peak torque of at 4,750 rpm (80% at 2,500 rpm) with an engine redline of 7,500 rpm and rev limiter of 7,600 rpm.[20] The V8 engine has variable timing, intake valves and a compression ratio of 11.3:1.[21]
The six–speed transaxle gearbox has computerized gear selection by means of paddles on the steering column and may be used in Manual-Normal; Manual-Sport; Automatic-Normal; Automatic-Sport and Wet modes. The gearbox can shift gears in 175 milliseconds when the Sport mode is selected.[22] The car also features a limited slip differential.
The 8C Competizione is fitted with specially developed 20-inch tyres: 245/35 at the front and 285/35 at the rear, wrapped around perforated wheels crafted from fluid moulded aluminium. The brakes of the car, which are Brembo carbon ceramic units have been called "phenomenal" by Road & Track magazine, with a stopping distance of 321NaN1, when travelling at an initial speed of 97km/h.[20] The official top speed is officially quoted to be 292km/h but it might be higher, with estimations that it could be around 306km/h according to the Road & Track magazine.[23]
| 0–100km/h | 4.2 seconds | |
|---|---|---|
| NaNmiles | 12.4 seconds at 116.4NaN | |
| Type | V8 engine | |
| Displacement | 46911NaN1 | |
| Power | 3310NaN0 at 7,000 rpm | |
| Torque | 4800NaN0 at 4,750 rpm[24] | |
| Lateral Acceleration (200feet skidpad) | 1.02 g | |
| Fuel consumption (calculated from emissions) | 16.25L/100 km |
At the 2005 Pebble Beach Concours d'Elegance, Alfa Romeo unveiled the 8C Spider, a roadster version of the Competizione coupé concept presented in 2003. The Spider concept was built by Carrozzeria Marazzi.[25] Production of the 8C Spider was confirmed by Sergio Marchionne on September 25, 2007. It was announced that the Spider would be built in a limited production run of 500 units and would cost around US$227,000 (€165,000), considerably more than the coupé version.[26]
The production version was unveiled at the 2008 Geneva Motor Show.[27] Production of the 8C Spider began in 2009, in Modena, with Maserati in charge of manufacturing the cars as with the coupé. While 500 cars were originally to be produced, only 329 Spiders in total were produced due to the impact of the Great Recession.[28] 35 of the 329 Spiders were destined for the United States. In the United States the 8C Spider had a base price of US$299,000.[29] In the October 2011 issue of Evo (magazine) the 8C Spider won the title of the 'Best Sounding Car'.
Alfa Romeo claims that the 8C Spider's top speed is 290km/h, which makes it slightly slower than the coupé version. The brakes on the Spider are Brembo carbon-ceramic units.[30] The Spider has a two-layer electrically operated fabric roof. The windshield frame is made of carbon fibre to try to maintain a 50/50 weight distribution.[31]
The 8C spawned several bespoke versions from renowned coachbuilders Carrozzeria Touring and Zagato.
The Alfa Romeo TZ3 Corsa is the track version of the TZ3 (hence the name TZ3 Corsa, Corsa meaning race in Italian) built to celebrate 100 years (a century) of Alfa Romeo in racing. The Corsa is a one-off car that was first presented at, and won, the 2010 Concorso d'Eleganza Villa d'Este in Italy. This unique car, based on the Alfa Romeo 8C Competizione, was made for German collector Martin Kapp and is not intended for sale or for competitions.
The car weighs 8500NaN0 due to its carbon fibre chassis and hand beaten aluminium body. A 4.2 litre dry sump V8 engine is fitted to the TZ3 which is rated at 4200NaN0. The car has a 6-speed automated manual gearbox and is able to attain a top speed of over 3000NaN0. It can accelerate from 0 to 1000NaN0 in 3.5 seconds.
The chassis is a carbon-fibre monocoque with some tubular elements. The suspension setup, front, and rear, are double wishbones, with pushrod actuated coil springs. The dampers installed are provided by Öhlins.[32]
The similarly-named Alfa Romeo TZ3 Stradale is not based on the 8C. The TZ3 Stradale was made after production of the 8C had ended, and is based on the Dodge Viper ACR.
The Alfa Romeo Disco Volante by Touring is a two-seater coupé, built by Carrozzeria Touring in 2013. It is based on the Alfa Romeo 8C Competizione. The model name is derived from the Disco Volante of the 1950s. Equipped with a front-central engine of 4.7 litre of displacement, it delivers 4500NaN0 and 480Nm of torque. The Disco Volante is rear-wheel-drive with a six-speed automated manual transmission. The transmission is a transaxle with a limited-slip differential, while the suspension is independent quadrilateral and made of aluminium.
The car is able to accelerate from 0 to 1000NaN0 in 4.2 seconds and can reach a top speed of 2910NaN0.
A Spyder version of Disco Volante was presented at the Geneva Motor Show in March 2016. A limited series of only seven cars were manufactured.[33] This is based on Alfa Romeo 8C Spider chassis.
| 8C Competizione, original production numbers | ||
|---|---|---|
| Country | Number of cars | |
| USA | 90 | |
| Italy | 80 | |
| Germany | 80 | |
| Japan | 70 | |
| France | 40 | |
| United Kingdom | 40 | |
| Switzerland | 35 | |
| Others | 65 | |
| Total | 500 | |