| ALCO RSD-15 | |
| Powertype: | Diesel-electric |
| Builder: | Alco |
| Builddate: | August 1956 – June 1960 |
| Buildmodel: | DL600B |
| Totalproduction: | 75 |
| Aarwheels: | C-C |
| Uicclass: | Co′Co′ |
| Trucks: | Alco trimount |
| Length: | 66feet[1] |
| Width: | 10feet |
| Height: | 14feet |
| Wheeldiameter: | 400NaN0 |
| Locoweight: | 3350001NaN1 |
| Poweroutput: | 24002NaN2 |
| Primemover: | Alco 251B |
| Enginetype: | V16 Four-stroke diesel |
| Cylindercount: | 16 |
| Generator: | GE GT586 |
| Tractionmotors: | GE 752 (6x) |
| Maxspeed: | 65mph |
| Tractiveeffort: | Starting: 956001NaN1 at 25% adhesion; Continuous: 795001NaN1 at 120NaN0 |
The ALCO RSD-15 is a diesel-electric locomotive built by the American Locomotive Company (ALCO) of Schenectady, New York between August 1956 and June 1960, during which time 75 locomotives were produced. The RSD-15 was powered by an ALCO 251 16-cylinder four-cycle V-type prime mover rated at 2400hp; it superseded the almost identical ALCO 244-engined RSD-7, and was catalogued alongside the similar but smaller 18002NaN2 RSD-12, powered by a 12-cylinder 251-model V-type diesel engine.
The locomotive rode on a pair of three-axle Trimount trucks with all axles powered by General Electric model 752 traction motors. These trucks have an asymmetrical axle spacing because of the positioning of the traction motors. The six-motor design allowed higher tractive effort at lower speeds than an otherwise similar four-motor design.
The RSD-15 could be ordered with either a high or low short hood; railfans dubbed the low short hood version "Alligators", due to their unusually long low noses.
A single example of the very similar model RSD-17 was built by the Montreal Locomotive Works in 1957. After demonstrating on the Canadian Pacific (as #7007), the Canadian National (as #3899), and the Pacific Great Eastern (as #624), the locomotive was purchased by the Canadian Pacific (as #8921). Nicknamed "The Empress of Agincourt", by Pete Fairfull, who was its primary operator for many years, (for its common presence around Toronto's Agincourt yard), the locomotive served the railway until 1995, when truck problems forced its retirement.[2]
| Railroad | Quantity | Road numbers | Notes |
|---|---|---|---|
| Atchison, Topeka and Santa Fe Railway | 50 | 800–849 | Low nose |
| Duluth, Missabe and Iron Range Railroad | 6 | 50–55 | Later Bessemer and Lake Erie Railroad 881-886 Cartier acquired the six units (91-96) 6/1972. All 6 units were converted to low hoods. #96 in service as Susquehanna and Maryland RR (SMD) #96 |
| Pennsylvania Railroad | 6 | 8611–8616 | Later Penn Central 6811–6816. Conrail rebuilt four of them to MT6s 1125–1128. After the dividing of Conrail, 2 went to CSX as 1017 and 1018, and 2 went to Norfolk Southern as 1114 and 1115. |
| Southern Pacific Railroad | 3 | 250–252 | Low nose |
| St. Louis Southwestern Railway | 10 | 850-859[3] | Renumbered 5150 – 5159 in 1965Low nose |
| Canadian Pacific Railway | 1 | 8921 | RSD-17 |
Five RSD-15s survive in preservation; all are ex-Santa Fe units.[5]
• Santa Fe #843 is preserved at the Arkansas Railroad Museum in Pine Bluff, Arkansas.
• Santa Fe #9820 is preserved at the California State Railroad Museum in Sacramento, but is not publicly displayed.
• Austin and Texas Central #442 (ex-ATSF #842) is preserved, but is currently out of service, at the Austin Steam Train Association (ASTA) in Cedar Park, Texas. It's painted in a modified Southern Pacific "Black Widow" scheme.[6] While #442 is sidelined being rebuilt should return into service late 2024 or early 2025[7] .
• Green Bay and Western #2407 (ex-ATSF #841) is preserved and operational at the Illinois Railway Museum.
• Utah Railway #401 (ex-ATSF #823) is preserved at the Utah State Railroad Museum in Ogden, Utah.
• The RSD-17 demonstrator, Canadian Pacific #8921, is preserved at the Elgin County Railway Museum, St. Thomas, Ontario, Canada.
The RSD-15 has been produced in N scale by Mehano of Yugoslavia and Broadway Limited of the United States.
The RSD-15 has been produced in HO scale by Broadway Limited Imports and handmade brass. Alco Models (DL600b) high and Low hoods. Also (Overland Models).[8]
The RSD-15 has been produced in O scale by Atlas O in their Trainman line.[9]
The RSD-17 has not been mass-produced in any scale; however, in 2008 Broadway Limited Imports did produce a limited run of the high-hood CP 8921 in HO scale.