The Airdrome Eindecker E-III is a single-seat, mid-wing, conventional landing gear fighter aircraft replica produced in kit form by Airdrome Aeroplanes of Holden, Missouri.[1] [2] [3] [4] [5] [6] [7]
The Airdrome Eindecker E-III is a 3/4 scale replica of the First World War Fokker Eindecker E.III, the protagonist of the Fokker Scourge of the summer of 1915 when, equipped with a single synchronized Maxim machine gun, the Fokker E.III achieved air superiority over the western front.[3]
The replica E-III was designed to give aircraft homebuilders the opportunity to construct a replica fighter and was intended to appeal to the pilot who is also a history buff. The aircraft fits into the US FAR 103 Ultralight Vehicles category and has a standard empty weight of 2380NaN0 when equipped with the standard 500NaN0 Rotax 503 engine. Optionally a 380NaN0 half Volkswagen air-cooled engine can be used, putting the aircraft in the US Experimental - Amateur-built category. Several other engines in the power range can be fitted, including the Solo Flight Solo 40, Rotax 447 and Hirth F23.[8] Other engines fitted to aircraft on the UK register include the Warner Scarab 145 and the Continental C85-12.[9]
The fuselage is constructed from pre-welded 4130 steel tube, along with aluminum tubing that is bolted and riveted together. The wing is conventional aluminum construction, wire braced from a short kingpost and the whole aircraft is covered with aircraft fabric. Unlike the original E-III, which utilized wing-warping, the replica has ailerons. The landing gear is bungee suspended. The engine cowling consists of a spun aluminum nose bowl with a sheet metal wrap-around.
The kits are supplied complete including paint and fabric, except for the engine, propeller and instruments. Of note, the kit does not include a replica machine gun. The factory estimates that an average builder can complete the aircraft kit in 300 hours.
The company claims that the aircraft kit can be assembled using "normal hand tools consisting of hacksaw, hand drill, file, pop rivet gun, wrenches, and hand nico press tool. Area required for construction should be approximate the size of a single car garage".
Twenty one examples had been completed by December 2011. Seven of these remained on the UK register in 2019.[9]