| Abiquiu Dam | |
| Coordinates: | 36.2381°N -106.4261°W |
| Country: | United States |
| Location: | Rio Arriba County, New Mexico |
| Construction Began: | 1956 |
| Opening: | 1963 |
| Dam Type: | Embankment |
| Dam Height: | 354feet[1] |
| Dam Length: | 1800feet |
| Dam Crosses: | Rio Chama |
| Res Name: | Abiquiu Lake |
| Res Capacity Total: | 1369000acre feet |
| Res Catchment: | 2146mi2 |
| Plant Operator: | County of Los Alamos[2] |
| Plant Commission: | 1987–1990, 2009–2011[3] |
| Plant Turbines: | 2x 6.75 MW 1x 3.0 MW |
| Plant Capacity: | 16.5 MW |
Abiquiu Dam is a dam on the Rio Chama, located about 60miles northwest of Santa Fe in Rio Arriba County, New Mexico, USA. Built and operated by the U.S. Army Corps of Engineers (USACE), the dam is an earth embankment structure 354feet high and 1800feet long, containing 11.8 million cubic yards (9,022,000 m3) of fill.[1] The dam forms Abiquiu Lake, one of the largest lakes in New Mexico, with a full storage capacity of 1369000acre feet[1] and 5200acres of water.[4] To date, the reservoir has never filled to capacity, with a record high of 402258acre feet, 29.4% of full pool, on June 22, 1987.[5] The dam's primary purpose is flood control, in addition to irrigation and municipal water storage, and hydroelectric generation.
The first proposal for a flood control dam on the Rio Chama was introduced in the Flood Control Act of 1948. The original plans called for the construction of a low dam at Chamita, about 20miles downstream of the present site of Abiquiu Dam. In the 1950s a dam at Abiquiu was added to the project, and it was later determined that a single high dam at this site would be sufficient. In the subsequent Flood Control Act of 1960, the Chamita dam was removed from the project. Construction of Abiquiu Dam began in 1956 and the river was diverted in July 1959. Limited flood control operations began in 1962 and the dam was completed on February 5, 1963, at a cost of $21.2 million.[6]
The dam initially functioned as a dry dam, with a very small permanent reservoir pool for sediment trapping purposes. In 1974 the city of Albuquerque petitioned the USACE for the regular storage of up to 200000acre feet in the reservoir as part of the San Juan–Chama Project. The USACE agreed in 1976 to allow this storage, also increasing the minimum reservoir volume to 44400acre feet for recreation purposes.[6] In 1986, the dam was raised by 13feet and the emergency spillway widened from 40feet to 80feet.
In 1990 a small power station was constructed at the dam base providing a capacity of 13.5 megawatts (MW).[2] Between 2009 and 2011, the addition of a turbine increased the plant's capacity to 16.5 MW. The hydroelectric plant is operated by Los Alamos County Department of Public Utilities.[7]