| .32 ACP | |
| Origin: | United States |
| Type: | Pistol |
| Designer: | John Browning |
| Manufacturer: | Fabrique Nationale |
| Production Date: | 1899–present |
| Case Type: | Semi-rimmed, straight |
| Bullet: | .3125 |
| Land: | .3005 |
| Neck: | .3365 |
| Base: | .337 |
| Rim Dia: | .358 |
| Rim Thick: | .045 |
| Case Length: | .680 |
| Length: | .984 |
| Max Pressure: | 20500 |
| Primer: | Small pistol |
| Bw1: | 60 |
| Btype1: | JHP[1] |
| Vel1: | 1,100 ft/s (335 m/s) |
| En1: | 161 |
| Bw2: | 65 |
| Btype2: | JHP[2] |
| Vel2: | 925 |
| En2: | 123 |
| Bw3: | 71 |
| Btype3: | FMJ[3] |
| Vel3: | 984 ft/s (300 m/s) |
| En3: | 158 |
| Bw4: | 73 |
| Btype4: | FMJ[4] |
| Vel4: | 1,043 ft/s (318 m/s) |
| En4: | 177 |
| Bw5: | 75 |
| Btype5: | Lead +P[5] |
| Vel5: | 1,150 ft/s (350 m/s) |
| En5: | 220 |
| Test Barrel Length: | 4 in, 4 in, 5.9 in, 3.9 in |
.32 ACP (Automatic Colt Pistol, also known as the .32 Auto, .32 Automatic, or 7.65×17mmSR) is a centerfire pistol cartridge. It is a semi-rimmed, straight-walled cartridge developed by firearms designer John Browning, initially for use in the FN M1900 semi-automatic pistol. It was introduced in 1899 by Fabrique Nationale, and is also known as the 7.65 mm Browning Short.[6]
John Browning engineered a number of modern semi-automatic pistol mechanisms and cartridges. As his first pistol cartridge, the .32 ACP needed a straight wall for reliable blowback operation as well as a small rim for reliable feeding from a box magazine. The cartridge headspaces on the rim.[7] The cartridge was a success and was adopted by dozens of countries and many governmental agencies.
When the .32 ACP cartridge was introduced, it was immediately popular and was available in several blowback automatic pistols of the day, including the Colt Model 1903 Pocket Hammerless, the Savage Model 1907 automatic pistol, the Ruby pistol and the Browning Model 1910 automatic pistol. Gun popularity rose after firearms expert Geoffrey Boothroyd, of the UK, informed author Ian Fleming, his countryman, that James Bond's sidearm should be a Walther PPK chambered in .32 ACP. A significant factor in recommending this round was its availability throughout the world in the 1950s.[8]
The .32 ACP has been chambered in more handguns than any other cartridge. Between 1899 and 1909, Fabrique Nationale produced 500,000 guns chambered for .32 ACP.[9]
Heckler & Koch produced the HK 4, their first handgun, in 1967. 12,000 HK 4 pistols were produced in .32 ACP for the German police and other government agencies.
Several long guns have been chambered in .32 ACP, from the Tirmax and Dreyse carbines to the AR-15-style Armi Jager AP-74.
The .32 ACP was intended for blowback semi-automatic pistols, which lack breech locking mechanisms. It was John Pedersen with the Remington Model 51 that delivered a true locked breech for the .32 ACP cartridge. The low power and light bullet of the cartridge allowed Browning to incorporate a practical blowback mechanism in a small pocket-size pistol. It is still used today, primarily in compact, inexpensive pistols, unless the pistol is used for ISSF competition, where the cost then escalates. Cartridges in .32 ACP are also sometimes used in caliber conversion sleeves, also known as supplemental chambers, for providing an alternative pistol caliber carbine function in .30-caliber hunting and service rifles.
Some comparison of the .32 Automatic as defined by SAAMI and the 7.65 Browning as defined by CIP may be useful. Although some of the cartridge measurements differ by as much as 0.0063inches, the names are considered to be synonymous. However, the maximum average pressure as measured by a transducer on the test barrel is 20500psi according to SAAMI, while CIP allows up to 1600bar. This may explain why the cartridges from European manufacturers tend to chronograph at higher muzzle velocities than those from American manufacturers.
The .32 ACP is compact and light. While some believe it has marginal stopping power,[10] it has been used effectively by military and police worldwide for the past century. Although .32 ACP handguns were traditionally made of steel, they have been produced in lightweight polymers since the 1990s. Their light weight, very low recoil and very good accuracy relative to larger caliber pistols make them suitable for concealed carry use. Some popular pistols chambered in .32 ACP are the Walther PP and the Walther PPK as well as the FEG PA-63, which is a clone of the Walther PP.
It offers more velocity and energy than the .32 S&W, which was a popular round for pocket defensive revolvers at the time of the .32 ACP's development. Although with lighter bullet weights, the .32 ACP also compares favorably to the .32 S&W Long in performance. Some European 73gr .32 ACP loads provide similar performance to the .32 H&R Magnum 77gr lead flat point and 90gr lead semiwadcutter.
Even though the .32 ACP is capable of killing small game, most handguns chambered for this round utilize fixed sights and are designed for use against human-sized targets at fairly close range, which greatly limits their utility as hunting handguns.
.32 ACP is one of the most common calibers used in veterinary "humane killers", such as the Greener humane killer.
In Europe, where the round is commonly known as the 7.65mm Browning and features a different rimsizing, .32 ACP has always been more widely accepted than it has in America, having a long history of use by civilians, law enforcement personnel, and security forces, along with limited issue by military forces.[6] During the second half of the 20th century, several European countries developed firearms for police, chambered in 9×18mm Makarov while chambering the same pistol for civilians in .32 ACP and .380 ACP. Examples include the Vz. 82/CZ-83 from Czechoslovakia, FEG PA-63/AP 765 from Hungary, SIG Sauer P230 from Switzerland, and P-83 Wanad from Poland.
The cartridge has an increased popularity in the United States due to modern compact concealed carry pistols chambered for it, such as the Kel-Tec P-32, Beretta Tomcat, Seecamp LWS 32 and North American Arms Guardian .32. This increase in popularity has led many ammunition manufacturers to develop new loads for the cartridge to increase performance. However, these subcompact guns typically have barrel lengths around 2.5inches. The traditional steel guns chambered for .32 ACP have barrel lengths around 3.5inches. Different barrel lengths can have a significant effect on bullet performance, with longer barrels providing higher muzzle velocity and energy. For example, a Cor-Bon 60gr .32 ACP JHP has 130ftlbf when fired out of a 2.5inches barrel and 165ftlbf when fired out of a 3.5inches barrel.[11] A shorter barrel length can also reduce the range of a bullet.