61 cm Type 90 torpedo explained

61 cm Type 90 torpedo
Origin:Empire of Japan
Type:Torpedo
Is Ranged:yes
Is Explosive:yes
Is Missile:yes
Is Uk:yes
Service:1933 - 1945
Used By:Imperial Japanese Navy
Wars:Second World War
Design Date:1928-1932
Manufacturer:Kure, Yokosuka and Sasebo Naval Arsenals
Weight:2.54t
Length:8.485m (27.838feet)
Diameter:60.9cm (24inches)
Range:7000m (23,000feet) (at 46 knots)
Max Range:15000m (49,000feet) (at 35 knots)
Filling:Type 97 (60% TNT, 40% HND)
Filling Weight:400kg (900lb)
Engine:2-cylinder double-action
Speed:46kn

The was a 61cm (24inches)-diameter surface-fired torpedo used by the Imperial Japanese Navy during World War II. It was notably first used in the s and in most cruisers, including the,,,, and heavy cruisers after refits during the 1930s. It is an evolution of the 8th Year Type torpedo and was superseded by the Type 93 oxygen torpedo, commonly called the Long Lance, as oxygen generating equipment was installed aboard surface ships.

Development

The torpedo was based on a newly developed British 46kn 21inches Whitehead torpedo. This weapon used a new double-action two-cylinder engine rather than the four-cylinder radial engine used by World War I-era British torpedoes. It was significantly faster (8kn10kn), although it had a much shorter range (only 10000m (30,000feet)) than the Japanese 6th and 8th Year torpedoes. Twenty of these were bought with training warheads in 1926 for ¥30,000 each; the British allowed Japanese technicians to observe the manufacturing process and launch trials. Japan bought a manufacturing license in 1928 for ¥150,000.[1]

The Japanese did not actually manufacture any of these torpedoes, but combined their technology with the results of independent Japanese research to produce the 61 cm Type 90. Testing of the prototypes was prolonged by the need to correct a number of design errors and manufacturing defects, but two prototypes were turned over to the Underwater School in 1931 for practical use. It was informally adopted for use in 1932, but not officially accepted until 15 November 1933. Production initially began at the Kure Naval Arsenal, but the Yokosuka and Sasebo Naval Arsenals began production later.[2]

Description

The Type 90 had an actual diameter of 60.9cm (24inches), weighed 2.54t and was 8.485m (27.838feet) long. It was very fast for the period and had an endurance of 7000m (23,000feet) at 46kn; 10000m (30,000feet) at 42kn; and 15000m (49,000feet) at 35kn. It was a wet-heater design and mixed kerosene with compressed air to further expand the air used to power the two-cylinder engine. The engine was cooled by saltwater and the resulting steam was recycled for use by the engine. Its warhead weighed 400kg (900lb), its air chamber was pressurized at 220bar.[1] [3] It was pneumatically launched from the torpedo tubes, in either a three or four tubes closed launchers configurations.

References

External links

Notes and References

  1. Lengerer, p. 103
  2. Lengerer, pp. 104-5, 110
  3. Web site: Japan Torpedoes Pre-World War II. 15 March 2008 . 2009-07-14.