Five whys explained

Five whys (or 5 whys) is an iterative interrogative technique used to explore the cause-and-effect relationships underlying a particular problem.[1] The primary goal of the technique is to determine the root cause of a defect or problem by repeating the question "why?" five times, each time directing the current "why" to the answer of the previous "why". The method asserts that the answer to the fifth "why" asked in this manner should reveal the root cause of the problem.[2]

The technique was described by Taiichi Ohno at Toyota Motor Corporation. Others at Toyota and elsewhere have criticized the five whys technique for being too basic and having an artificially shallow depth as a root cause analysis tool (see).

Example

An example of a problem is: the vehicle will not start.

  1. Why? – The battery is dead.
  2. Why? – The alternator is not functioning.
  3. Why? – The alternator belt has broken.
  4. Why? – The alternator belt was well beyond its useful service life and not replaced.
  5. Why? – The vehicle was not maintained according to the recommended service schedule (a root cause).

The questioning for this example could be taken further to a sixth, seventh, or higher level, but five iterations of asking why is generally sufficient to get to a root cause.[3] The key idea of the method is to encourage the troubleshooter to avoid assumptions and logic traps and instead trace the chain of causality in direct increments from the effect through any layers of abstraction to a root cause that still has some connection to the original problem. In this example, the fifth "why" suggests a broken process or an alterable behavior, which is indicative of reaching the root-cause level.

This nature of the answer to the fifth why in the example is an important aspect of the five why approach. The real root cause should point toward a process that is not working well or does not exist.[4] Untrained facilitators without this understanding of the method often observe that answers obtained seem to point towards classical answers such as not enough time, not enough investments or not enough resources. These answers regardless of merit are often out of the troubleshooter's control to fix. Therefore practitioners of the method recommend instead of asking why? to ask why did the process fail?

History

The technique was originally developed by Sakichi Toyoda and was used within the Toyota Motor Corporation during the evolution of its manufacturing methodologies. It is a major component of problem-solving training, delivered as part of the induction into the Toyota Production System. The architect of the Toyota Production System, Taiichi Ohno, described the five whys method as "the basis of Toyota's scientific approach by repeating why five times[5] the nature of the problem as well as its solution becomes clear." The tool has seen use beyond Toyota, and is now used within Kaizen, lean manufacturing, lean construction and Six Sigma. The five whys were initially developed to understand why new product features or manufacturing techniques were needed, and was not developed for root cause analysis.

In other companies, it appears in other forms. Under Ricardo Semler, Semco practices "three whys" and broadens the practice to cover goal setting and decision-making.[6]

Techniques

Two primary techniques are used to perform a five whys analysis:[7] the fishbone (or Ishikawa) diagram and a tabular format.

These tools allow for analysis to be branched in order to provide multiple root causes.[8]

Criticism

The five whys technique has been criticized as a poor tool for root cause analysis. Teruyuki Minoura, former managing director of global purchasing for Toyota, criticized it as being too basic a tool to analyze root causes at the depth necessary to ensure an issue is fixed.[9] Reasons for this criticism include:

Medical professor Alan J. Card also criticized the five whys as a poor root cause analysis tool and suggested that it be abandoned because of the following reasons:[10]

To avoid these issues, Card suggested instead using other root cause analysis tools such as fishbone or lovebug diagrams.[10]

See also

External links

Notes and References

  1. Book: Olivier D., Serrat . The Five Whys Technique . February 2009 . Asian Development Bank . September 5, 2019.
  2. Book: Ohno, Taiichi . Toyota production system: beyond large-scale production . Productivity Press . 1988 . 0-915299-14-3 . Portland, OR . Taiichi Ohno . registration.
  3. Book: Serrat, Olivier . 10.1007/978-981-10-0983-9_32 . The Five Whys Technique . Knowledge Solutions . 307–310 . 2017 . 978-981-10-0982-2.
  4. Book: Fantin, Ivan . Applied Problem Solving. Method, Applications, Root Causes, Countermeasures, Poka-Yoke and A3 . 2014 . 978-1499122282.
  5. Web site: Ohno . Taiichi . March 2006 . "Ask 'why' five times about every matter." . https://web.archive.org/web/20221127052017/https://www.toyota-myanmar.com/about-toyota/toyota-traditions/quality/ask-why-five-times-about-every-matter . Nov 27, 2022 . September 5, 2019.
  6. Book: Semler, Ricardo . The Seven-Day Weekend . 2004 . Penguin . 9781101216200 . Ask why. Ask it all the time, ask it any day, and always ask it three times in a row. . Ricardo Semler . registration.
  7. Web site: Bulsuk . Karn . April 2, 2009 . An Introduction to 5-why . September 5, 2019.
  8. Web site: Bulsuk . Karn . July 7, 2009 . 5-whys Analysis using an Excel Spreadsheet Table . September 5, 2019.
  9. Web site: October 8, 2003 . The "Thinking" Production System: TPS as a winning strategy for developing people in the global manufacturing environment . https://web.archive.org/web/20201121032113/https://media.toyota.co.uk/wp-content/files_mf/1323862732essenceTPS.pdf . November 21, 2020 . September 5, 2019 . Public Affairs Division, Toyota Motor Corporation.
  10. Card . Alan J. . August 2017 . The problem with '5 whys' . . 26 . 8 . 671–677 . 27590189 . 10.1136/bmjqs-2016-005849. 42544432 . free .