| 24 cm Kanone 3 | |
| Origin: | Germany |
| Type: | Heavy Siege Gun |
| Is Artillery: | yes |
| Service: | 1939–45 |
| Used By: | Nazi Germany |
| Wars: | World War II |
| Designer: | Rheinmetall |
| Design Date: | 1935–38 |
| Manufacturer: | Krupp |
| Production Date: | 1938–44 |
| Number: | 14+ |
| Weight: | 54866kg (120,959lb) |
| Part Length: | 13.102abbr=onNaNabbr=on |
| Cartridge Weight: | 151.4kg (333.8lb) (HE) |
| Caliber: | 238mm |
| Rate: | 1 rd per 4–5 min |
| Velocity: | 970 m/s (3,182 ft/s) |
| Max Range: | 37km (23miles) |
| Breech: | horizontal sliding-block |
| Recoil: | dual-recoil hydro-pneumatic |
| Carriage: | Box trail |
| Elevation: | 0° to +56° |
| Traverse: | 6° on carriage 360° on platform |
The 24-cm-Kanone 3 (24 cm K 3) was a German heavy siege gun used in the Second World War by the first battalion of Artillerie-Regiment 84. Four were in service when Germany invaded Poland, assigned to the first two batteries of I./AR 84,[1] and in the Battle of France.[2] By Operation Barbarossa all three batteries were equipped with two guns apiece.[3] This situation did not change for the next two years.[4]
The gun for the K 3 was of standard construction while the carriage was considerably more innovative. Rheinmetall placed a lot of emphasis on ease of assembly. It did not require a crane because it used electric winches, mounted on the carriage, to pull various parts through a system of inclined ramps, guide rails and runways. It also used the Rheinmetall's dual-recoil system, first seen on the 21 cm Mörser 18. The barrel recoiled normally in its cradle, but, in addition, the whole top carriage, which carried the barrel and its cradle, recoiled across the main part of the carriage. This system damped out the recoil forces and made for a very steady firing platform.
The K 3 was transported in six loads consisting of the firing platform, carriage, cradle, barrel, breech and an electric generator.
The Wehrmacht was not content with the gun's performance: "It was felt to be wasteful of time and manpower, the transport arrangements were cumbersome and the performance was not considered to be commensurate with the size of weapon."[5] These led to experiments by Krupp and Rheinmetall to extend the range. These included "pre-grooved" projectiles which showed no significant improvement, squeeze-bore, discarding sabot and even a smoothbore version. None of these reached beyond the experimental stage.
The Bundeswehr Museum of German Defense Technology in Koblenz has one of these cannons in its collection.