The 16-pin 12VHPWR connector is a standard for connecting graphics processing units (GPUs) to computer power supplies. It was introduced in 2022 to supersede the previous 6- and 8-pin power connectors for GPUs. The primary aim was to cater to the increasing power requirements of high-performance GPUs. It was replaced by a minor revision called 12V-2x6, which changed the connector to ensure that the sense pins only make contact if the power pins are seated properly.
The original connector was formally adopted as part of PCI Express 5.x,[1] while the revised 12V-2x6 connector design was adopted later.[2]
The connector first appeared in the Nvidia RTX 40 GPUs.[3] [4] The prior Nvidia RTX 30 series introduced a similar, proprietary connector in the "Founder's Edition" cards, which also uses an arrangement of twelve pins for power, but did not have the sense pins, except for the connector on the founders edition RTX 3090 Ti (though not present on the adapter supplied with those cards.)[5]
The 16-pin 12VHPWR connector, where HPWR stands for "High Power," supports higher power delivery to GPUs, up to 600 watts, a significant increase from the 150 watts of the 8-pin connector and the 75 watts of the 6-pin connector.[6] [7]
Adapters converting multiple 8-pin to a single 16-pin connector are available.[8]
The 16-pin connector comprises twelve power pins arranged in two parallel rows, and four auxiliary sense pins that communicate the maximum allowable power draw.
Some buyers of the Nvidia RTX 4090, the first GPU to use the new connector, reported that the connectors of their RTX 4090 were melting,[9] which sparked several theories to explain it. After investigation, several sources reported that the main cause was the 12VHPWR connector not being fully seated while being put under load that resulted in overheating of the connector's pins, which in turn caused the melting of the plastic housing.[10] [11]
PCI-SIG, the standards organization responsible for the creation of the 12VHPWR connector, has decided to make changes to the connector's specifications following the failures.[12]
A class-action lawsuit has been filed against Nvidia over melting 12VHPWR cables which the lawsuit states is "a dangerous product that should not have been sold in its current state."[13] The plaintiff who brought the suit claims that Nvidia unjustly enriched itself, violated the product's warranty and engaged in fraud and they are demanding that Nvidia pay damages to affected customers as compensation.[14]
Following its own investigation and testing, Nvidia officially offered a statement on the melting connectors. They determined that the melting connectors are a cause of user error from not inserting the 12VHPWR connector properly, causing partial contact. They have offered an expedited RMA process for any RTX 4090 affected by the melting connectors.[15] [16] [17] PCI-SIG later said in a statement that Nvidia and their partners were still responsible for testing their products to account for user error.[18]
Despite these claims of user error, a revised connector design intended to address these issues was introduced under the new name 12V-2x6.[19]
In February 2024 the U.S. Consumer Product Safety Commission announced a voluntary recall of 12VHPWR adapters made by Cablemod. According to the recall filing, 272 reports were filed with about 25300 units shipped. The recall covers adapters using both the initial and the revised 12V-2x6 (CEM 5.1) design.[20]
It was also reported that the new connectors have a limited lifespan of around 30–40 mating cycles before contact potentially becoming unreliable.[21]
It has been noted that the older 6- and 8-pin connectors had substantially larger manufacturer-specified current-carrying capacity in relation to the power limits specified by PCI SIG:[22] [6]
| Rated current per pin | 7–8 A[23] [24] | 9.5 A[25] | |
|---|---|---|---|
| Rated power | 8 A × 12 V × 3 = 288 W | 9.5 A × 12 V × 6 = 684 W | |
| Specified power | 150 W | 600 W | |
| Safety factor | 1.9 | 1.1 |