152 mm/53 Italian naval gun Models 1926 and 1929 explained

152 mm /53 Model 1926–1929
Origin:Italy
Type:Naval gun
Is Explosive:yes
Is Artillery:yes
Service:1926–1964
Used By:Italy
Wars:World War II
Designer:Ansaldo
Design Date:1926
Manufacturer:Ansaldo
OTO Melara
Production Date:1926–1929
Weight:Model 1926: 7.34 metric tons
Model 1929: 7.69 metric tons
Length:8.5m (27.9feet)
Part Length:8m (26feet) 53 caliber
Cartridge Weight:Early: 50kg (110lb)
Late: 47.5kg (104.7lb)
Caliber:152mm
Rate:Model 1926: 4 rpm
Model 1929: 5-8 rpm
Velocity:Early: 1000m/s
Late: 850m/s
Max Range:Early: 28.4km (17.6miles) at +45°
Late: 22.6km (14miles) at +45°[1]
Breech:Horizontal sliding breech block
Elevation:Model 1926: -5° to +45°
Model 1929:-10° to +45°
Traverse:-150° to +150°[2]

The 152 mm /53 Model 1926–1929 were built for the Italian Navy in the years before World War II. These guns were used on all Condottieri-class light cruisers except the Duca degli Abruzzi-class.

Construction

The Model 1926 was designed and manufactured by Ansaldo, while the Model 1929 was manufactured by OTO Melara. Although both models of gun were similar in construction, components from each manufacturer were not fully interchangeable.

The gun mounts had electrically powered training, elevation, hoists, rammers and the guns shared a common cradle. Improvements in ammunition handling meant that the rate of fire for the Model 1929 was nearly twice as fast as the Model 1926. Loading was at +20° for the Model 1926, while the model 1929 could be loaded at any angle up to 45°. These guns suffered from dispersion problems so the original muzzle velocity of 1000m/s was reduced to 850m/s with AP shells. Shell weight was also reduced from 50kg (110lb) to 47.5kg (104.7lb) in an attempt to resolve these problems, but were only partially successful. The main reason for the dispersion problem was because the guns were mounted too close together on a common cradle, which also complicated loading of the guns.[3]

Naval Service

The majority of the Condottieri-classes had two superfiring twin-mount turrets forward and aft, except for the Duca degli Abruzzi-class which had different model guns and had two twin-turrets replaced with two triple-turrets. The Giussano-class carried Model 1926 guns, while the Cadorna-class, Montecuccoli-class and Duca d'Aosta-class carried Model 1929 guns. The mountings for the Giussano-class and Cadorna-class were found to be too lightly built for the recoil forces created by these guns.[4]

Ammunition

Ammunition was of quick fire separate loading type. The AP projectile was 63cm (25inches) long with a cartridge case and a bagged charge which weighed 21.43kg (47.25lb).

The gun was able to fire:

Photo gallery

Surviving examples of Model 1929 guns salvaged from the Cruiser Raimondo Montecuccoli are located at the Città della Domenica theme and amusement park near Perugia, in Italy.

See also

Weapons of comparable role, performance and era

References

Notes and References

  1. Campbell, Naval Weapons of WWII, p.328.
  2. Web site: 152 mm/53 (6") Models 1926 and 1929 - NavWeaps. Tony. DiGiulian. navweaps.com.
  3. Campbell, Naval Weapons of WWII, p.331-332.
  4. Campbell, Naval Weapons of WWII, p.331-332.
  5. Web site: 152 mm/53 (6") Models 1926 and 1929 - NavWeaps. Tony. DiGiulian. navweaps.com.