| 14"/50 caliber gun | |
| Origin: | United States |
| Type: | Naval gun |
| Is Ranged: | "yes" |
| Is Artillery: | "yes" |
| Service: | 1918–1956 |
| Used By: | US Navy |
| Wars: | World War II |
| Designer: | Bureau of Ordnance |
| Design Date: |
|
| Manufacturer: | U.S. Naval Gun Factory |
| Number: |
|
| Variants: | Marks 4, 6, 7, 11 and B |
| Weight: | 179614lb (with breech) |
| Length: | 59.5feet |
| Part Length: | 700inches bore (50 calibers) |
| Cartridge: |
|
| Caliber: | 14adj=onNaNadj=on |
| Rate: |
|
| Velocity: |
|
| Range: | 250000NaN0 at 15° elevation HC |
| Max Range: | 36800yd at 30° elevation AP |
| Recoil: | 48adj=onNaNadj=on |
| Elevation: |
|
| Traverse: | 306° max 297° min |
The 14"/50 caliber gun was a naval gun mounted on and s. These ships also featured the first "three-gun" turrets, meaning that each gun in each turret could be "individually sleeved" to elevate separately (however, they could be linked so they would elevate as a unit, similar to the triple turrets on other Navy ships). The 14"/50 caliber guns were designated as Mark 4 and 6, with later versions known as Mark 7, 11, and B. These guns were more powerful than the main gun mounted on the previous three classes of US battleships (the, and es), the 14"/45 caliber gun.[1]
The 14-inch (356mm), 50 caliber[2] gun was the weapon chosen as the main armament on the when they were originally designed, but it was later switched to the 16"/50 caliber Mark 2 gun in a 1917 redesign. The ships were eventually canceled in 1922 after the Washington Naval Treaty was signed.[3]
The 14"/50 caliber gun was designed in 1916 and entered service in 1918 on the s. The guns were capable of firing a 1402lb armor-piercing (AP) projectile at an angle of 15 degrees, to a range of 24000yd. Each gun weighed approximately 179614lb, including the breech, and was 59.5feet long. The propellant charge used for the ammunition weighed 470lb and was contained in four bags.
Each Mark 4 built-up gun consisted of a tube, liner, and a screw box liner with a separate screwed-on flange. Three hoops and two locking rings were also included. The Mark 6 was slightly different in that it contained a single step taper liner and uniform twist rifling. Downward-opening Welin breech blocks and Smith-Asbury mechanisms were used on both Mark 4 and Mark 6 types. The Navy encountered dispersion problems at extreme ranges with these guns in the 1920s. Several methods were used to correct these problems, including correction of range tables for errors, addition of delay coils, reduction of chamber volume, and improvement of shot seating.
The Mark 7 was designed in the 1930s and entered service in 1935. This gun included a smaller chamber, a shell-centering cone, a single-slope band seat, uniform rifling, and a tube locking ring. The Mark 11 was introduced later, with chromium plating added to the bore. New Mexico- and Tennessee-class battleships were rearmed with 14"/50 Mark 11 guns, with the Tennessee receiving the upgrade in 1942. The dispersion problems that existed with Marks 4 and 6 were corrected with these guns.[4]
A newer version of the 14"/50 caliber gun, Mark B, was designed in 1937. It was the original gun intended for use on the s. Although it was simpler and lighter than the older versions, the Mark B was the most powerful 14 inch weapon ever designed by the United States. However, the prototype of this gun was not completed because the 14 inch treaty limit was rescinded in 1937 which allowed the new battleships to be armed with 16 inch guns.
The 14"/50 caliber gun was installed on five battleships:,,,, and . Although both Tennessee and California were damaged during the attack on Pearl Harbor, both of these ships' guns, along with the other three, were used in the Second World War in shore bombardment duty. Mississippi, Tennessee, and California all participated in the last line battle to date: the Battle of Surigao Strait. As shore bombardment platforms, these five battleships participated in all phases of the war, such as the Aleutian Islands Campaign (Idaho, Tennessee), the Battle of Kwajalein (New Mexico, Mississippi, Idaho, Tennessee), and the Battle of Guam (New Mexico, Idaho, Tennessee, California).[5] [6] [7] [8] [9]
| Ship | Gun Installed | Gun Mount | |
|---|---|---|---|
| (1916 design) | Guns: 14"/50 caliber | Turrets:
| |
| Guns: 14"/50 caliber | Turrets: 4 × three-gun turrets | ||
| Guns: 14"/50 caliber | Turrets: 4 × three-gun turrets | ||
| (1935 "B" design) | Mark B: 14"/50 caliber | Turrets: 3 × four-gun turrets |
During World War I, five of the 14"/50 caliber guns served as railway guns on the Western Front in France.[10] Gun No. 119L2, a Mark 2 gun on a Mark 1 Railway Mount No. 148, is located at the US Navy Museum, Washington Navy Yard, Washington, D.C. Gun No. 19, on an M1918 Railway Mount No. 9, built by the Marion Steam Shovel Company, is located at the US Army Ordnance School, Fort Gregg-Adams, Virginia.[11]