12-inch/40-caliber gun explained

12"/40 caliber Mark 3 and Mark 4
Origin:United States
Type:Naval gun
Is Ranged:YES
Is Artillery:YES
Service:1902
Used By:United States Navy
Wars:World War I
Designer:Bureau of Ordnance
Design Date:1899
Manufacturer:U.S. Naval Gun Factory
Number:
  • Mark 3: 41 (Nos. 15–41, 50–56)
  • Mark 4: 10 (Nos. 49, 58–60, 150–154, 179)
Variants:Mark 3 and Mark 4
Weight:
  • (with breech)
  • (without breech)
Part Length: bore (40 calibers)
Cartridge: armor-piercing
Rate:
  • 0.66 rounds per minute (as commissioned)
  • 2 rounds per minute (after 1906)
Velocity:
  • (as commissioned)
  • (first derating)
  • (final derating)
Range: at 15.5° elevation
Elevation:
  • Mark 4: -3° to +15°
  • Mark 5: -7° to +20°
Traverse:-150° to +150°

The 12"/40 caliber gun (spoken as "twelve-inch-forty--caliber") were used for the primary batteries of the United States Navy's last class of monitors and the and pre-dreadnought battleships.

Design

The 12adj=on0adj=on/40 caliber gun was developed after the Spanish–American War to use the new smokeless powder that had recently been adopted by the Navy. The Mark 3, gun Nos. 15–48 and 50–56, was constructed of tube, jacket, and eight hoops. It was found that the early guns suffered from excessive bore erosion, in an attempt to fix this the Navy reduced the propellant charges to reduce the muzzle velocity, because of this the Mark 4, gun Nos. 49, 58–60, 150–154, and 179, was similar to the Mark 3 but with a smaller chamber for the reduced propellant charge.

Service history

The guns mounted in the Virginia-class battleships were in an unusual two-level turret with the 8adj=on0adj=on/45 caliber guns on top of the larger 12-inch guns. This arrangement ultimately proved unsuccessful but helped the Navy in the successful development of superfiring turrets later used in the dreadnought .

Incident

Gun No. 49, while testing powder at the Naval Proving Ground, had the entire muzzle and chase blow off. The board appointed to investigate came to the conclusion that the new powder, while performing properly, caused a pressure along the chase that was dangerously close to the strength curve. It was decided that when the guns were withdrawn to be relined they would add an additional hoop that extended to the muzzle would be placed on the chase.

Naval Service

ShipGun InstalledGun Mount
Mark 3 or 4: 12"/40 caliberMark 4: 1 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 4: 1 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 4: 1 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 4: 1 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 4: 2 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 4: 2 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 4: 2 × twin turrets
Mark 3 or 4: 12"/40 caliberMark 5: 2 × dual-caliber turrets
Mark 3 or 4: 12"/40 caliberMark 5: 2 × dual-caliber turrets
Mark 3 or 4: 12"/40 caliberMark 5: 2 × dual-caliber turrets
Mark 3 or 4: 12"/40 caliberMark 5: 2 × dual-caliber turrets
Mark 3 or 4: 12"/40 caliberMark 5: 2 × dual-caliber turrets

References

Books

. Norman Friedman . Naval Weapons of World War One . Seaforth Publishing . 2011 . 978-1-84832-100-7 .

. Newton E. Mason . Report of the Chief of the Bureau of Ordnance to the Secretary of the Navy . Government Printing Office . Washington, D.C. . 1 October 1905 . 13 October 2016 .

Online sources

External links