| .510 DTC EUROP | |
| Origin: | France |
| Type: | Rifle |
| Designer: | Eric Danis |
| Design Date: | 2000 |
| Is Si Specs: | yes |
| Parent: | .50 BMG |
| Bullet: | 12.98 |
| Neck: | 14.22 |
| Shoulder: | 19.28 |
| Base: | 20.38 |
| Rim Dia: | 20.42 |
| Rim Thick: | 2.26 |
| Case Length: | 96.14 |
| Length: | 137.47 |
| Case Capacity: | 19.175 |
| Primer: | CCI#35 (.50 BMG) |
| Is Si Ballistics: | yes |
| Bwunit: | gram |
| Bw1: | 41.9 |
| Vel1: | 910 |
| En1: | 17306 |
| Balsrc: | https://bobp.cip-bobp.org/uploads/tdcc/tab-i/tabical-en-page155.pdf |
The .510 DTC EUROP is a French rifle cartridge developed by Eric Danis of Dan Tec to comply with firearms legislation of .50 BMG rifles in Europe. The .510 DTC EUROP uses the same bullet as the .50 BMG, but has slightly different case dimensions. The case is 0.1inches shorter and uses a steeper shoulder than standard .50 BMG ammunition. .510 DTC cases can be made by shortening and then fire-forming .50 BMG cases. The new round has almost identical ballistics, but because of the different dimensions, rifles chambered for the .50 BMG cannot safely fire the .510 DTC, and vice versa, and therefore do not fall under the same legal prohibitions such as California's .50 Caliber BMG Regulation Act of 2004.[1] [2] [3] [4]
