.32 rimfire explained

.32 Short Rimfire
Origin:United States
Type:Rifle and handgun
Designer:Smith & Wesson
Design Date:1860
Case Type:Rimmed, straight
Bullet:.316
Neck:.318
Base:.318
Rim Dia:.377
Case Length:0.575
Length:0.948
Primer:Rimfire
Bw1:80
Btype1:Rimmed
Vel1:945
En1:159
Test Barrel Length:24
.32 Long Rimfire
Origin:United States
Type:Pistol/Rifle
Designer:Smith & Wesson
Design Date:1860
Case Type:Rimmed, straight[1]
Bullet:.316
Neck:.318
Base:.318
Rim Dia:.377
Case Length:0.791
Length:01.26
Primer:Rimfire
Bw1:90
Btype1:Rimmed
Vel1:1080
En1:233
Test Barrel Length:24
.32 Extra Long
Origin:United States
Type:Pistol/Rifle
Case Type:Rimmed, straight
Bullet:.316
Neck:.318
Base:.318
Rim Dia:.377
Case Length:1.150
Length:01.26
Primer:Rimfire
Bw1:90
Btype1:Rimmed
Vel1:1050
En1:221
Btype2:rimmed
Test Barrel Length:24

The .32 rimfire / 8x20mmRF refers to a family of cartridges which were chambered in revolvers and rifles in the late 19th and early 20th centuries. These rounds were made primarily in short and long lengths, but extra short, long rifle and extra long lengths were offered.[1]

Manufacturers

Manufacturers in the USA generally discontinued making .32 rimfire ammunition after the country's entrance into World War II in 1941.[1] It was available from old stocks for some years afterwards, but it has been made only sporadically in the last 70 years.[1] Occasionally, special limited runs of .32 rimfire ammunition are manufactured for gun collectors with shootable specimens, but the round is not considered a current commercial cartridge. Navy Arms Company had periodically imported .32 Rimfire Long made by CBC in Brazil until 2014.[2]

History

The .32 short was designed in 1860 by Smith & Wesson for their Model 2 revolver. In 1868, they introduced the .32 Long in the Model 1 Second Issue revolver.[3]

The .32 Short fired an 803NaN3 lead bullet at 945ft/s (generating 159ftlb muzzle energy) from a 24inches rifle barrel. The .32 Long fired a slightly heavier 903NaN3 bullet at approximately the same velocity, for 178ftlb muzzle energy. Remington rifles in .32 rimfire listed a bore diameter of 0.304inches[4]

The .32 Colt Short and Long centerfire cartridges matched the external dimensions of the .32 Short and Long rimfire cartridges.[5] The Marlin Model 1892 lever-action repeating rifle was shipped with two firing pins, one rimfire and one centerfire, to allow use of either the rimfire or centerfire cartridges.[6] Revolvers and single shot rifles chambered for one of the longer .32 rimfire cartridges would chamber and fire the shorter cartridges.[1]

Remington Arms manufactured .32 Extra Short ammunition (also known as .32 Protector) until 1920 for use in the Protector Palm Pistol and Remington Magazine Pistol.[7]

During its lifetime, the .32 rimfire was loaded with black powder, followed by semi-smokeless and smokeless powder loadings. While it was popular as a very effective small game caliber, it was considered obsolete by the late 1930s, in part due to the introduction of high-velocity versions of the .22 Long Rifle using smokeless powder.[1]

See also

Notes and References

  1. Book: Barnes, Frank C.. Cartridges of the World. 1997. 0873491785. 386. 8th. M.L. McPherson.
  2. Book: Woodard, W. Todd. Cartridges of the World: A Complete and Illustrated Reference for Over 1500 Cartridges. 1 December 2014. F+W Media. Iola, Wisconsin. 978-1-4402-4274-8. 1768–1769.
  3. Book: Kinard, Jeff. Pistols: An Illustrated History of Their Impact. 2004. ABC-CLIO. 978-1851094707. 115.
  4. Sharpe, Phillip B. The Rifle in America (William Morrow and Co., 1938).
  5. https://www.handloadermagazine.com/cartridge-board-17
  6. Sears, Roebuck and Co. Catalogue No. 104, 1897.
  7. Book: Barnes, Frank C.. Cartridges of the World: A Complete and Illustrated Reference for Over 1500 Cartridges. 22 September 2009. Gun Digest Books. Iola, Wisconsin. 978-1-4402-1330-4. 447.