| .30-06 Springfield | |
| Origin: | United States |
| Type: | Rifle |
| Service: | 1906–late 1970s (United States Armed Forces) 1906–present |
| Used By: | United States and other nations |
| Wars: | World War I World War II Korean War Vietnam War to present |
| Designer: | Springfield Armory |
| Design Date: | 1906 |
| Manufacturer: | Springfield Armory, Lake City Arsenal, others |
| Production Date: | 1906–present |
| Is Si Specs: | no |
| Parent: | .30-03 Springfield |
| Case Type: | Rimless, straight walled, bottleneck |
| Bullet: | .308 in (7.82 mm)[1] |
| Land: | .300 |
| Neck: | .340 |
| Shoulder: | .441 |
| Base: | .471 |
| Rim Dia: | .473 |
| Rim Thick: | .049 |
| Case Length: | 2.494 |
| Length: | 3.34 |
| Case Capacity: | 68 |
| Rifling: | 1 in 10inches |
| Primer: | Large rifle |
| Max Pressure: | 58740 |
| Pressure Method: | C.I.P. |
| Max Pressure2: | 60000 |
| Pressure Method2: | SAAMI |
| Max Cup: | 50,000[2] |
| Is Si Ballistics: | no |
| Bw1: | 150 |
| Btype1: | Nosler Ballistic Tip |
| Vel1: | 2910 |
| En1: | 2820 |
| Bw2: | 165 |
| Btype2: | BTSP |
| Vel2: | 2800 |
| En2: | 2872 |
| Bw3: | 180 |
| Btype3: | Core-Lokt Soft Point |
| Vel3: | 2700 |
| En3: | 2913 |
| Bw4: | 200 |
| Btype4: | Partition |
| Vel4: | 2569 |
| En4: | 2932 |
| Bw5: | 220 |
| Btype5: | RN |
| Vel5: | 2500 |
| En5: | 3036 |
| Test Barrel Length: | 24 inch (61 cm) |
| Balsrc: | Federal Cartridge[3] / Accurate Powder[4] |
The .30-06 Springfield cartridge (pronounced "thirty-aught-six" pronounced as /ˈθɝɾi ɔt sɪks/), 7.62×63mm in metric notation, and called the .30 Gov't '06 by Winchester,[5] was introduced to the United States Army in 1906 and later standardized; it remained in military use until the late 1970s. In the cartridge's name, ".30" refers to the nominal caliber of the bullet in inches; "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03 Springfield, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO, both of which remain in current U.S. and NATO service. The cartridge remains a very popular sporting round, with ammunition produced by all major manufacturers.
In the early-1890s, the U.S. military adopted the smokeless powder .30-40 Krag rimmed cartridge. The 1894 version of that cartridge used a 220gr round-nose bullet. Around 1901, the U.S. started developing an experimental rimless cartridge for a Mauser action with a box magazine. That led to the 1903 .30-03 Springfield rimless service round that used the same 220gr round-nose bullet as the Krag.[6] The .30-03 achieved a muzzle velocity of 2300ft/s.
Many European militaries at the beginning of the 20th century were adopting lighter-weight (roughly 150gr200gr), higher velocity, service rounds with pointed (spitzer) bullets: France in 1898 (8×50mmR Lebel Balle D spitzer 198gr with boat-tail), Germany in 1903 (7.92×57mm Mauser 153gr S Patrone), Russia in 1908 (7.62×54mmR Lyokhkaya pulya [light bullet]), and Britain in 1910 (.303 British Mark VII 174gr).[7] Consequently, the round-nosed U.S. .30-03 service cartridge was falling behind.[8]
For these reasons, the U.S. military developed a new, lighter cartridge in 1906, the .30-06 Springfield, "cartridge, ball, caliber .30, Model of 1906", or just M1906. The .30-03 case was modified to have a slightly shorter neck to fire a spitzer flat-based 150gr bullet that had a ballistic coefficient (G1 BC) of approximately 0.405, a muzzle velocity of 2700ft/s, and a muzzle energy of 2429ftlbf. The cartridge was loaded with military rifle (MR) 21 propellant, and its maximum range was claimed (falsely) to be 4700-1NaN-1.[9] The M1903 Springfield rifle, which had been introduced alongside the .30-03 cartridge, was modified to accept the new .30-06 Springfield cartridge. Modifications to the rifle included shortening the barrel at its breech and resizing the chamber, so that the more tapered bullet would not have to jump too far to reach the rifling. Other changes to the rifle included the elimination of the troublesome "rod bayonet" of the earlier Springfield rifles.
The M1906 maximum range was originally overstated. When the M1906 cartridge was developed, the range tests had been done to only 1800yd; distances beyond that were estimated, but the estimate for extreme range was incorrect by almost 40 percent. The range discrepancy became evident during World War I. Before the widespread employment of light mortars and artillery, long-range machine gun "barrage" or indirect fires were considered important in U.S. infantry tactics.[10] When the U.S. entered World War I, it did not have many machine guns, so it acquired British and French machine guns. When those weapons were later replaced with U.S. machine guns firing the M1906 round, the effective range of the barrage was 50 percent less. Firing tests performed around 1918 at Borden Brook Reservoir (Massachusetts), Miami, and Daytona Beach showed the actual maximum range of the M1906 cartridge to be 3300to. Germany, which was using the S Patrone (S ball cartridge) loaded with a similar 153gr flat-based bullet in its rifles, had apparently confronted and solved the same problem by developing an aerodynamically more refined bullet for long-range machine gun use. The s.S. Patrone was introduced in 1914 and used a 197.52NaN2 s.S. – schweres Spitzgeschoß (heavy spitzer) boat-tail bullet which had a maximum range of approximately 50000NaN0.[11]
For these reasons, in 1926, the ordnance corps, after extensive testing of 7.5×55mm Swiss GP11 projectiles provided by the Swiss, developed the .30 M1 ball cartridge loaded with a new improved military rifle (IMR) 1185 propellant and 174gr bullet with a 9° boat-tail and an ogive of 7 calibers nose cone that had a higher ballistic coefficient of roughly 0.494 (G1 BC),[12] [13] that achieved a muzzle velocity of 2647ft/s and muzzle energy of 2675ftlbf. This bullet further reduced air resistance in flight, resulting in less rapid downrange deceleration, less lateral drift caused by crosswinds, and significantly greater supersonic and maximum effective range from machine guns and rifles alike.[14] Additionally, a gilding metal jacket was developed that all but eliminated the metal fouling that plagued the earlier M1906 cartridge.The loaded round weighed and its maximum range was approximately 5500-1NaN-1.[14] The maximum average pressure (MAP) was 480002NaN2. The average target radius was specified to be not greater than 4.50NaN0 at 5000NaN0 and not greater than 5.50NaN0 at 6000NaN0 when fired from a Mann accuracy weapon.[15] [16]
Wartime surplus totaled over two billion rounds of ammunition. Army regulations called for training use of the oldest ammunition first. As a result, the older .30-06 ammunition was expended for training; stocks of .30 M1 ball ammunition were allowed to slowly grow until all of the older M1906 ammunition had been fired. By 1936, it was discovered that the maximum range of the .30 M1 ball ammunition with its boat-tailed spitzer bullets was beyond the safety limitations of many military firing ranges. An emergency order was made to manufacture quantities of ammunition that matched the external ballistics of the earlier M1906 cartridge as soon as possible. A new cartridge was developed in 1938 that was essentially a duplicate of the old M1906 round, but loaded with IMR 4895 propellant and a new flat-based bullet that had a gilding metal jacket and a different lead alloy, and weighed 152gr instead of 150gr. This 1938 pattern cartridge, the cartridge, caliber .30, ball, M2, achieved a muzzle velocity of 2805ft/s and muzzle energy of 2656ftlbf. The loaded round weighed and its maximum range was approximately 3450-1NaN-1.[14] The MAP was 500002NaN2 by copper crusher (equivalent to the SAAMI CUP unit). The average target radius was specified to be not greater than 6.51NaN1 at 5000NaN0 and not greater than 7.51NaN1 at 6000NaN0.[15]
In military service, the .30-06 was used in the bolt-action M1903 Springfield rifle, the bolt-action M1917 Enfield rifle, the semi-automatic M1 Garand rifle, the semi-automatic M1941 Johnson rifle, the Famage Mauser, the Browning Automatic Rifle (BAR), and numerous machine guns, including the M1917 and M1919 series. It served the United States in both World Wars and in the Korean War, and its last major use was during the Vietnam War.
The Belgian army (ABL) bought the FN Model 1949 rifle in .30-06 caliber (both as a sniper version with telescopic sights and as a general service weapon). The Belgian armed forces used the round widely in the Korean war, where the .30-06 caliber FN-49 proved to be a superior weapon in terms of both accuracy and reliability to the American M1 Garand. The .30-06 FN-49 saw widespread use in the various wars in and around the Belgian Congo. The 30-06 FN-49 was also sold to the armies of Luxembourg, Indonesia, and Colombia. Another customer was Brazil where it served the navy.
Large volumes of surplus brass made it the basis for dozens of commercial and wildcat cartridges, as well as being extensively used for reloading. In 1908 the Model 1895 Winchester lever-action rifle became the first commercially-produced sporting rifle chambered in .30-06 Springfield. It is still a very common round for hunting and is suitable for large game such as bison, Sambar deer, and bear, when used at close to medium ranges.
In 1903, the Army converted its M1900 Gatling guns in .30 Army to fit the new .30-03 cartridge as the M1903. The later M1903-'06 was an M1903 converted to .30-06. This conversion was principally carried out at the Army's Springfield Armory arsenal repair shops. All models of Gatling guns were declared obsolete by the U.S. Army in 1911, after 45 years of service.[17]
With "hot" handloads and a rifle capable of handling them, the .30-06 is capable of performance rivaling many magnum cartridges. However, when loaded more closely to the original government specs, .30-06 remains within the upper limit of felt recoil most shooters consider tolerable over multiple rounds, unlike the magnums, and is not unnecessarily destructive of meat on game such as deer. With appropriate loads, it is suitable for any small or large heavy game found in North America. The .30-06's power and versatility (combined with the availability of surplus firearms chambered for it and demand for commercial ammunition) have kept the round as one of the most popular for hunting in North America.
The .30-06 cartridge was designed when shots of 1000yd were expected. In 1906, the original M1906 .30-06 cartridge consisted of a 150gr, flat-base cupronickel-jacketed-bullet. After World War I, the U.S. military needed better long-range performance machine guns. Based on weapons performance reports from Europe, a streamlined, 173gr boattail, gilding-metal bullet was used. The .30-06 cartridge, with the 173gr bullet was called cartridge, .30, M1 ball. The .30-06 cartridge was far more powerful than the smaller Japanese 6.5×50mm Arisaka cartridge and comparable to the Japanese 7.7×58mm Arisaka. The new M1 ammunition proved to be significantly more accurate than the M1906 round.[18]
In 1938, the unstained, 150gr, flat-base bullet combined with the .30-06 case became the M2 ball cartridge. The M2 ball specifications required 2740ft/s minimum velocity, measured 78feet from the muzzle.[19] M2 ball was the standard-issue ammunition for military rifles and machine guns until it was replaced by the 7.62×51mm NATO round in 1954. For rifle use, M2 ball ammunition proved to be less accurate than the earlier M1 cartridge; even with match rifles, a target group of 5inches diameter at 200yd using the 150gr M2 bullet was considered optimal, and many rifles did not perform nearly as well.[18] The U.S. Marine Corps retained stocks of M1 ammunition for use by snipers and trained marksmen throughout the Solomon Islands campaign in the early years of the war.
In an effort to increase accuracy, some snipers resorted to use of the heavier .30-06 M2 armor-piercing round, a practice that re-emerged during the Korean War. Others sought out lots of M2 ammunition produced by Denver Ordnance, which had proved to be more accurate than those produced by other wartime ammunition plants when used for sniping at long range. With regards to penetration, the M2 AP round[20] can penetrate at least 0.422NaN2 of armor steel at 100yd. A test done by Brass Fetchers shows that M2 AP can actually penetrate up to 0.52NaN2 of MIL-A-12560 armor steel from a distance of 100yd. The round struck the plate at a velocity of 2,601 fps and made a complete penetration.[21]
Commercially manufactured rifles chambered in .30-06 are popular for hunting. Current .30-06 factory ammunition varies in bullet weight from 7.1 to 14.3 grams (110 to 220 grains) in solid bullets, and as low as 3.6 grams (55 grains) with the use of a sub-caliber bullet in a sabot.[22] Loads are available with reduced velocity and pressure as well as increased velocity and pressure for stronger firearms. The .30-06 remains one of the most popular sporting cartridges in the world. Many hunting loads have over of energy at the muzzle and use expanding bullets that can deliver rapid energy transfer to targets.
| Bullet weight | Federal[23] | Hodgdon[24] | Speer[25] | Hornady[26] | Nosler[27] | Barnes[28] | |
|---|---|---|---|---|---|---|---|
| 110gr | N/A | 3505ft/s | 3356ft/s | 3500ft/s | N/A | 3471ft/s | |
| 125- | 3140ft/s | 3334ft/s | 3129ft/s | 3200ft/s | 3258ft/s | 3278ft/s | |
| 150gr | 2910ft/s | 3068ft/s | 2847ft/s | 3100ft/s | 3000ft/s | 3031ft/s | |
| 165gr | 2800ft/s | 2938ft/s | 2803ft/s | 3015ft/s | 3002ft/s | 2980ft/s | |
| 180gr | 2700ft/s | 2798ft/s | 2756ft/s | 2900ft/s | 2782ft/s | 2799ft/s | |
| 200gr | N/A | 2579ft/s | 2554ft/s | N/A | 2688ft/s | 2680ft/s | |
| 220gr | 2400ft/s | 2476ft/s | N/A | 2500ft/s | 2602ft/s | 2415ft/s |
The table above shows typical muzzle velocities available in commercial 30-06 loads along with the maximum .30-06 muzzle velocities reported by several reloading manuals for common bullet weights. Hodgdon, Nosler, and Barnes report velocities for barrels. Hornady and Speer report velocities for barrels. The data are all for barrels with a twist rate of 1 turn in which is needed to stabilize the heaviest bullets. The higher muzzle velocities reported by Nosler for 165gr and heavier bullets use loads employing a slow-burning, double-base powder (Alliant Reloder 22).
The newer 7.62×51mm NATO/.308 Winchester cartridge offers similar performance to standard military .30-06 loadings in a smaller cartridge.
One reason that the .30-06 has remained a popular round for so long is that the cartridge is at the upper limit of power that is tolerable to most shooters.[29] [30] Recoil energy (free recoil) greater than will cause most shooters to develop a serious flinch, and the recoil energy of an 8lb rifle firing a 165gr 30-06 bullet at is 20.1ftlbf. Recoil-shy shooters can opt for lighter bullets, such as a 150gr bullet. In the same 8lb rifle, a 150gr bullet at will only generate 17.6ftlbf of recoil energy.[31] Young shooters can start out with even lighter bullets weighing 110,.
The .30-06 Springfield cartridge case can hold 68.2 grains and has a volume of 4.42ml. The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt-action rifles and machine guns alike, under extreme conditions.
.30-06 Springfield maximum C.I.P. cartridge dimensions. All sizes in millimeters.[32]
Americans define the shoulder angle at alpha/2 = 17.5 degrees. According to the Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives (C.I.P.) the common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 4 grooves, Ø lands = 7.62 mm (.30 in), Ø grooves = 7.82 mm (.308 in), land width = 4.49 mm (.1768 in) and the primer type is large rifle.
According to the official C.I.P. guidelines, the .30-06 Springfield case can handle up to 405 MPa (58,740 psi) piezo pressure. In C.I.P.-regulated countries, every rifle cartridge combination has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers. The 8×64mm S is the closest European ballistic twin of the .30-06 Springfield.
Although the .30-06 was designed as a military round, it soon caught the attention of big game hunters in the United States. This new cartridge offered a flatter trajectory and carried more energy than the popular .30-30 Winchester. The .30-06 also could be loaded with the then new spitzer designed projectiles, which also contributed to extending the cartridge's performance with respect to other .30 caliber bullets fired from lever action rifles, making it easier to put venison on the table.
It is a very versatile round that may be loaded with bullets ranging from 110 to 220 grains, which may be effectively stabilized from 1:10" twist barrels. Thus, the cartridge may be used to hunt animals of different sizes from varmint to moose and even brown bears with adequately constructed heavy bullets.[33] Since the cartridge may be used for taking all North American big game species it was considered an all-round by hunters and gun writers as Jack O'Connor, who hunted extensively with it.[34] [35]
President Theodore Roosevelt took a .30-06 to his famous African Safari along with his son Kermit and Frederick Coerteney Selous, proving that the .30-06 could bring down game of any size. Though not optimal for dangerous game, the .30-06 is adequate for hunting African plains game.[36]
With 150-grain bullets, the .30-06 Springfield is a perfect option for medium-sized game such as deer and sheep. Leaving the muzzle at 2950 fps, it gives the hunter a maximum point blank range slightly short of 300 yards. The 165 and 168-grain bullets with higher ballistic coefficient contribute to buck cross winds more efficiently and maintain downrange energy at expense of a more curved trajectory, while loaded with 180 to 220 grains, the .30-06 is adequate for hunting larger game such as elk, moose, and even brown bears.
The .30-06 is also the parent case for many other popular hunting cartridges such as the venerable .270 Winchester, the .25-06 Remington, the .280 Remington, and the .280 Ackley Improved. All of them are balanced, flat-shooting cartridges ranking high among the most popular big game hunting cartridge for mid-sized species worldwide.
Despite the new trend towards high ballistic coefficient cartridges, designed to be used with short length actions, hunters still praise the .30-06 as it still lists high on the rank of big game hunting cartridges popularity, and every major gun maker worldwide chambers it in at least one of its rifles.[37]
Note: .30-06 cartridges are produced commercially with many different bullets and to a number of different specifications.
The .30-06 round was replaced by the 7.62×51mm NATO round in 1954. However, it remained in limited use in the army reserves and national guard for some time; Frankford Arsenal only stopped production in 1961, and Lake City Army Ammunition Plant was making .30-06 until the late 1970s, with new production batches in 1993 and 2002. The "T" (Trials) designation is the code number it had when it was under development and testing. The "M" (Model) designation is the number it received when it was made standard-issue. Issued bullets before 1934 used the year of adoption as their model number.
The .30-06 (or "caliber .30") cartridge was adopted in 1940 during the beginnings of the Lend-Lease program in anticipation of using American weapons in front-line service. The British used American-made ammunition during the war, which was designated as cartridge S.A, .30 to avoid confusing it with their own .303 British service round. It was used after the war as belted machinegun ammunition by the Royal Armored Corps and was not declared obsolete until October, 1993. The "z" after the numeral indicates that it used a nitrocellulose propellant rather than cordite. Marks of ammunition were originally designated with Roman numerals (i.e., .303 Ball Mark VII), but were replaced with Arabic numerals by 1945 (i.e., .303 Ball MK 7).
The .30-06 round was adopted in 1949 for use in American war surplus military aid weapons like the M1 Garand and M1919 medium machinegun. Military production was from the 1950s to the mid-1960s, while export production to French Union nations lasted until the late 1980s. Cartridge cases were softer than US specifications to prohibit their being recovered and reloaded by insurgents.
loads by inserting an 8-round Mannlicher-type en bloc clip. The clip is ejected upon either firing the last round or pressing a release button on the magazine.
feeding from a 10-round internal rotary magazine, loading from 5-round stripper clips
prototype bullpup using 20-round M1918 BAR magazines
prototype
Some U.S. Gatling guns were re-chambered for .30-06
The Benét–Mercié light machine gun was chambered for .30-06
The US used a mix of Chauchats in .30-06 and 8 mm Lebel
The US used a limited amount of Lewis guns chambered in .30-06 in both World War I and World War II
loading from detachable 20-round magazines
Similar to the Colt–Browning machine gun ('Potato Digger'), but without the swinging 'digger' piston (linear gas-action piston replacing the swinging action), and used mainly on aircraft.
feeding from 20-round side-loading magazine.